KINGSOFE 20000LM Multi-Socket LED Headlight Bulbs

Contents

KINGSOFE 20000LM Multi-Socket LED Headlight Bulbs

User Instruction Manual

1. Introduction

Thank you for choosing KINGSOFE LED Headlight Bulbs. These high-performance automotive lighting solutions are designed to provide superior brightness, a perfect beam pattern, and a long lifespan for a safer driving experience. This manual provides essential information for the proper installation, operation, and maintenance of your new LED headlight bulbs.

2. Safety Information

  • Always ensure the vehicle's engine is off and the battery is disconnected before attempting any installation or maintenance.
  • Wear appropriate safety gear, such as gloves and eye protection, during installation.
  • Avoid touching the LED chips directly, as oils from your skin can reduce their lifespan.
  • Keep the bulbs away from flammable materials.
  • FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.
  • Modifications Warning: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

3. Package Contents

Please check the package for the following items:

  • 2 x KINGSOFE LED Headlight Bulbs

4. Specifications

FeatureSpecification
Nominal Power110W (90W/bulb)
Luminous Flux20,000LM per pair
Color Temperature6000K Cool White
Operating VoltageDC 12V - 24V
Rated Current1.5A - 10A
LED Chip TypeSuper Bright COB Chip
Cooling MethodTurbo Cooling Fan, Aviation Aluminum Heat Sink
Waterproof GradeIP68
LifespanUp to 50,000 Hours
Operating Temperature-40℃ to +85℃ (-40℉ to +185℉)
Hi/Lo Beam Socket TypesH4, 9004, 9007, H13, 9008
Single Beam Socket TypesH1, H7, H8, H9, H11, 9005 (HB3), 9006 (HB4), 9012 (HIR2)
OriginMainland China

Product Dimensions (Examples)

Dimensions vary slightly by socket type. Refer to the diagram below for common sizes:

Product size diagrams for H1, H3, H4, H11, H13, H7 socket types with dimensions.
Figure 1: Product dimensions for various socket types (H1, H3, H4, H11, H13, H7). All types feature a 35.0mm base diameter and 25.0mm fan depth. Overall height varies (e.g., H1: 82.0mm, H7: 73.0mm).

5. Installation Guide

These LED headlight bulbs are designed for easy plug-and-play installation, closely mimicking the design of original halogen bulbs. Always ensure your vehicle is off and cool before starting.

  1. Preparation: Turn off your vehicle's engine and ensure the headlights are cool. Disconnect the negative terminal of your vehicle's battery for safety.
  2. Access Headlight Assembly: Open the hood and locate the back of the headlight assembly. You may need to remove some covers or components to gain access, depending on your vehicle model.
  3. Remove Old Bulb: Disconnect the electrical connector from the existing halogen bulb. Then, unclip or twist to remove the old bulb from its housing.
  4. Install LED Bulb: Insert the new KINGSOFE LED headlight bulb into the housing. Ensure it is seated correctly and securely. The 360° rotatable socket allows for easy adjustment to achieve the optimal beam pattern.
Image showing the 360° rotatable socket for easy installation and a washer to prevent moisture.
Figure 2: The 360° rotatable socket design facilitates easy installation and beam pattern adjustment. Integrated washers help prevent moisture ingress into the headlight assembly.
  1. Connect Electrical Plug: Connect the LED bulb's factory connector directly to your vehicle's original headlight harness plug. These bulbs are designed for a perfect match with most OEM sockets.
  2. Test Functionality: Reconnect the battery. Turn on your vehicle's headlights to test the new LED bulbs. Check both low and high beams. If the light does not turn on, try reversing the plug (some vehicles have polarity-sensitive wiring).
  3. Adjust Beam Pattern (if necessary): If the beam pattern is not optimal, gently rotate the LED bulb in its housing until a clear, focused beam is achieved without excessive glare to oncoming traffic.
  4. Secure and Reassemble: Once satisfied with the installation and beam pattern, secure any clips or covers removed earlier.

6. Operation

Once installed, your KINGSOFE LED Headlight Bulbs operate like standard vehicle headlights. Use your vehicle's existing headlight switch to toggle between off, parking lights, low beam, and high beam settings.

Comparison of low beam and high beam lighting patterns, showing increased brightness and distance with LED bulbs compared to halogen.
Figure 3: Comparison of low beam and high beam performance. LED bulbs provide a concentrated light pattern with high brightness, offering a long lighting distance beyond 200 meters for high beam.

7. Maintenance

KINGSOFE LED Headlight Bulbs are designed for durability and minimal maintenance. The integrated cooling system ensures optimal performance and longevity.

  • Cleaning: If necessary, gently wipe the bulb's lens with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
  • Inspection: Periodically check the headlight assembly for any signs of moisture or damage. Ensure the bulbs are securely seated.
  • Cooling System: The built-in turbo cooling fan and aviation aluminum heat sinks are designed to maintain proper operating temperature. Ensure no debris obstructs the fan or heat sink fins.
Diagram illustrating the efficient cooling system with aviation aluminum heat sinks and built-in fan.
Figure 4: The efficient cooling system features aviation aluminum heat sinks and a built-in fan to dissipate heat, ensuring stable chip operation and extended lifespan.

8. Troubleshooting

ProblemPossible CauseSolution
LED bulb does not light upIncorrect polarity; Loose connection; Blown fuseReverse the electrical plug; Ensure connections are secure; Check vehicle's headlight fuse.
Flickering or intermittent lightLoose connection; Voltage fluctuation; CANBUS incompatibility (rare)Secure all connections; Ensure stable power supply; For some sensitive vehicles, a CANBUS decoder might be needed (not typically required for these bulbs).
Poor beam pattern or glareBulb not seated correctly; Incorrect rotationRe-seat the bulb firmly; Adjust the 360° rotatable socket until the beam is focused and horizontal.
Headlight warning on dashboardVehicle's computer detects lower wattage (CANBUS issue)While these bulbs are generally CANBUS-ready, some highly sensitive vehicles may require an additional CANBUS decoder.

9. User Tips

  • Before purchasing, double-check your vehicle's original bulb type to ensure compatibility with the available socket types (H1, H4, H7, etc.).
  • When installing, take a moment to compare the LED bulb's light output and pattern with the original halogen bulb to appreciate the significant upgrade.
  • Ensure the cooling fan has adequate space behind the headlight assembly for optimal heat dissipation and bulb longevity.

10. Warranty and Support

KINGSOFE LED Headlight Bulbs come with a 1-year warranty from the date of purchase, covering manufacturing defects. This warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

For technical support, warranty claims, or any questions regarding your product, please contact your retailer or the KINGSOFE customer service channel where you purchased the product.

Certifications

This product complies with international standards for safety and quality.

Certificates for CE, FCC, and RoHS compliance.
Figure 5: Product certifications including CE, FCC, and RoHS, indicating compliance with European, US, and hazardous substance directives.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.