MESTEK WM710A

Contents

MESTEK WM710A Pinless Wood Moisture Meter User Manual

1. Overview

The MESTEK WM710A is a non-destructive pinless wood moisture meter designed to measure moisture content without damaging the material. It utilizes a spherical humidity sensor to detect moisture up to a depth of 20-40mm, making it suitable for various materials including wood, walls, drywall, firewood, and concrete.

Key Features:

  • Non-destructive measurement with spherical probe
  • Self-calibration function
  • Large HD color LCD screen for easy reading
  • Data hold function
  • MAX/MIN record for highest and lowest readings
  • Automatic shut-down after 30 minutes of inactivity
  • Adjustable moisture alarm function (DRY, RISK, WET)
  • Low power indicator
  • Digital value display
MESTEK WM710A Moisture Meter with key features

Figure 1: MESTEK WM710A Pinless Wood Moisture Meter and its key features.

2. Safety Information

Please read and understand the following safety precautions before using the device:

  • The product is not waterproof. Store it properly to avoid damage.
  • Keep the product away from high temperatures, direct sunlight, strong vibration, corrosive liquids, dust, and strong electromagnetic interference.
  • Do not disassemble the product; this may cause malfunction and void the warranty.
  • When measuring, keep your hands away from the spherical measuring head, as the humidity of your hands can affect the measurement accuracy.
  • If the ambient temperature or product temperature changes suddenly, allow the device to acclimatize for a period before use to ensure temperature balance.
  • Avoid dropping or subjecting the product to strong impacts.
  • Remove batteries if the device will not be used for an extended period to prevent battery leakage.

3. Product Components

Familiarize yourself with the parts of your MESTEK WM710A moisture meter:

  1. Non-destructive Humidity Sensor: Spherical probe (25mm diameter) for contact-free measurement.
  2. Analog Display: Color bar graph indicating moisture levels (DRY, RISK, WET).
  3. Numeric Display: Shows the precise measured moisture value.
  4. Power Button: Turns the device on and off.
  5. MAX/MIN Button: Toggles between current, maximum, and minimum recorded values.
  6. MEAS Button: Used for calibration and to hold/release data on the display.
  7. SET Key: Enters the alarm limit setting mode.
  8. Up/Down Buttons (▲/▼): Adjusts numeric values in setting modes.
  9. Color Screen: High-definition LCD display.
Labeled diagram of the WM710A moisture meter's components

Figure 2: Labeled diagram of the MESTEK WM710A moisture meter.

4. Setup

4.1 Battery Installation

The MESTEK WM710A requires three AAA 1.5V batteries (not included).

  1. Ensure the device is powered off.
  2. Locate the battery cover on the back of the device.
  3. Slide or unclip the battery cover to remove it.
  4. If replacing, remove any old batteries.
  5. Insert three new AAA 1.5V batteries, observing the correct polarity (+/-) as indicated inside the battery compartment.
  6. Replace the battery cover and secure it.

5. Operating Instructions

5.1 Power On/Off

  • To Power On: Press the Power button.
  • To Power Off: The device features an automatic shut-down function after 30 minutes of inactivity. To manually power off, press and hold the Power button.

5.2 Calibration

Calibration ensures accurate readings. It should be performed before the first use and after each power-on.

  1. Hold the device in the air, away from any objects, surfaces, or your hand. Ensure the spherical sensor head is at least 80-100mm away from any surface.
  2. Press the MEAS button. The LCD screen will display

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.