Introduction
This 3-in-1 EMS Ultrasound Machine is a versatile beauty instrument designed for body slimming, skin tightening, and anti-aging. It combines EMS (Electrical Muscle Stimulation), Infrared Ray, Ultrasound, and LED Light technologies to help improve skin metabolism, blood circulation, and address various body beauty concerns.
Package Contents
Please check the package for the following items:
- 1 x 3-in-1 EMS Ultrasound Machine (Model: XCM-098)
- 1 x USB Charging Cable
- 1 x User Manual (PDF version available at PDF User Manual)
Device Overview
Familiarize yourself with the different parts and controls of your device:
- EMS Electrodes: For Electrical Muscle Stimulation.
- Ultrasonic Head: Emits ultrasonic waves.
- LED Lights: Red and Blue light therapy.
- Display Screen: Shows current mode and intensity.
- Power Button: To turn the device on/off.
- EMS Mode Selection Button: To cycle through EMS modes.
- EMS Gear Adjustment Buttons: To adjust EMS intensity.
- LED Red/Blue Switch: To select red or blue LED light.
- Ultrasonic Switch: To activate/deactivate ultrasonic function.
- Charging Port: For connecting the USB charging cable.
Setup
1. Charging the Device
- Before first use, fully charge the device.
- Connect the USB charging cable to the charging port on the device.
- Plug the other end of the USB cable into a compatible 5V-1A USB power adapter (not included).
- The device will indicate charging status on its display. A full charge typically takes a few hours.
2. Preparation for Use
- Ensure your skin is clean and dry before applying the device.
- For optimal results and comfortable use, it is recommended to apply a suitable gel or cream to the treatment area, especially when using the Ultrasound and EMS functions.
Operating Instructions
1. Power On/Off
- Press and hold the Power button for a few seconds to turn the device ON. The display will light up.
- To turn OFF, press and hold the Power button again until the display turns off.
2. Mode Selection and Usage
The device offers multiple functions that can be used individually or in combination:
EMS Microcurrent (Electrical Muscle Stimulation)
- Press the 'EMS mode selection' button to activate EMS.
- Use the 'EMS gear' buttons to adjust the intensity level (typically 1-5). Start with a low intensity and gradually increase as comfortable.
- Apply the device head directly to the skin on target areas like arms, legs, waist, back, belly, and hips.
- Move the device in circular motions or as directed for specific treatments.
- EMS helps in muscle tightening, body sculpting, and stimulating acupuncture points.
Ultrasound Function
- Press the 'Ultrasonic switch' button to activate the ultrasonic function.
- Apply a conductive gel to the skin before using ultrasound.
- Gently move the device head in circular motions over the desired area.
- Ultrasound helps in improving cell chemistry, enhancing tissue nutrition, and accelerating metabolism.
LED Light Therapy
- Press the 'LED red/blue switch' button to toggle between Red and Blue LED lights.
- Red Light (640nm): Penetrates 1-6mm into the skin, promoting cell regeneration, blood circulation, and relieving pain.
- Blue Light (440nm): Penetrates 1mm into the skin, soothing allergic skin, eliminating acne, and removing acne bacteria.
- The LED lights can be used in conjunction with EMS or Ultrasound modes.
Infrared Ray
- The device incorporates far infrared heating, suitable for human skin temperature.
- Far infrared rays penetrate deep into subcutaneous tissues, promoting fat burning and accelerating blood circulation.
- This function is typically active when the device is in use, providing gentle warmth.
Negative Ion Deep Nourishment
- The negative ion skin care mode generates negative ion energy to help nutrients from skincare products penetrate deeper into the skin, nourishing epidermal cells.
- Use with your preferred skincare products for enhanced absorption.
Recommended Usage: For optimal results, use the device for approximately 15 minutes a day. Consistent use over four weeks can lead to improvements in fat index, skin thickness, and texture.
Maintenance
1. Cleaning
- After each use, wipe the device head with a soft, damp cloth.
- Do not use abrasive cleaners, alcohol, or harsh chemicals, as these may damage the device.
- Ensure the device is completely dry before storing.
2. Storage
- Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep out of reach of children.
Troubleshooting
Common Issues and Solutions
- Device not turning on: Ensure the device is fully charged. If it still doesn't turn on, contact customer support.
- No sensation during EMS: Increase the EMS intensity level. Ensure the device head is in full contact with the skin and a conductive gel is applied.
- No ultrasonic vibration felt: Ultrasonic vibrations are high-frequency and may not be directly felt. Apply a drop of water to the device head; if it atomizes, the function is working correctly.
Important Note on Skin Sensation
When the device is working, you might experience a sensation like hair being pulled, or some sensitive skin may even feel a slight bee sting. These sensations are normal and indicate the device is functioning as intended.
Specifications
| Feature | Specification |
|---|---|
| Model Number | XCM-098 |
| Brand Name | DH Beauty |
| Power Input | 5V-1A |
| Power | 4.2W |
| Ultrasonic Frequency | 3MHz |
| Material | ABS |
| Application Area | Body (Arms, Legs, Waist, Back, Belly, Hip), Face, Neck/Throat, Eyes |
| Certification | CE |
| Dimensions (Approx.) | 190mm (Length) x 80mm (Head Width) x 42mm (Handle Width) |
| Weight (Approx.) | 0.453 kg |
User Tips
- Consistency is Key: For best results, use the device regularly as recommended (e.g., 15 minutes daily).
- Use with Conductive Gels/Creams: Always apply a suitable conductive gel or cream to the treatment area before using the Ultrasound and EMS functions to ensure proper contact and effectiveness.
- Hydration: Maintain good hydration by drinking plenty of water, which can support the body's natural processes enhanced by the device.
- Listen to Your Body: Start with lower intensity settings and gradually increase as your comfort level allows. If you experience any discomfort, reduce the intensity or discontinue use.
Warranty & Support
For any questions, technical support, or warranty claims, please contact the seller directly through the platform where you purchased the product. Please refer to the digital user manual (PDF) for additional details and safety information.