ATUOTIN Smart Sound Light Alarm Siren

Contents

ATUOTIN Smart Sound Light Alarm Siren

User Instruction Manual

1. Introduction

Thank you for choosing the ATUOTIN Smart Sound Light Alarm Siren. This device is designed to enhance your home security by providing a loud audible alarm and a visual light alert when triggered. It integrates with your smart home system via Zigbee 3.0, allowing for remote control and notifications through a mobile application.

Front view of the ATUOTIN Smart Sound Light Alarm Siren

Figure 1: Front view of the Smart Sound Light Alarm Siren

2. Package Contents

  • Smart Sound Light Alarm Siren (Battery not included)
  • USB Data Cable
  • Instruction Manual
  • Sticker Screw Pack for mounting

3. Device Overview

Diagram showing components and dimensions of the alarm siren

Figure 2: Device components and dimensions (68mm diameter, 32mm depth)

  • LED Indicator: Shows device status.
  • Speaker: Emits the alarm sound.
  • USB Port: For 5V/1A power supply.
  • Reset Button: Used for pairing and resetting the device.
  • Battery Compartment: Holds 2-3 CR123A batteries.

4. Setup

4.1 Powering the Device

  1. Battery Installation: Open the battery compartment on the back of the siren. Insert 2-3 CR123A batteries, ensuring correct polarity.
  2. USB Power: Alternatively, connect the provided USB data cable to the USB port on the siren and plug the other end into a 5V/1A USB power adapter (not included).

4.2 Mounting the Device

Back view of the alarm siren showing the keyhole for mounting

Figure 3: Back view with keyhole for wall mounting

  1. Choose a suitable location for the siren, ensuring it is within the Zigbee network range (up to 55 meters).
  2. Use the provided sticker screw pack to securely mount the siren on a wall or flat surface using the keyhole slot on the back.

4.3 App Pairing (Zigbee 3.0)

This device requires a Zigbee hub (not included) and a compatible smart home application (e.g., Tuya Smart App) for full functionality.

  1. Ensure your Zigbee hub is powered on and connected to your home network.
  2. Open your smart home application and navigate to the device addition section.
  3. Put the alarm siren into pairing mode by pressing and holding the Reset button (refer to Figure 2) until the LED indicator flashes rapidly.
  4. Follow the on-screen instructions in your app to discover and add the device.
  5. Once successfully paired, the LED indicator will stop flashing and remain solid or turn off, depending on the device status.

5. Operating Instructions

5.1 Alarm Functionality

Alarm siren mounted on a wall, indicating 90dB loud alarm and 18 optional sounds

Figure 4: The siren features a 90dB loud alarm with 18 optional sounds

Alarm siren triggering sound and light alerts

Figure 5: When triggered, the siren emits both sound and light

  • When triggered by a connected sensor (e.g., door/window sensor, motion sensor), the siren will emit a loud alarm sound (up to 90dB) and flash its integrated light.
  • You can select from 18 optional alarm sounds via the mobile application.
  • The siren's settings (e.g., chosen sound, volume level) are stored in its memory. If the network or power is temporarily disconnected and then restored, the previous settings will be automatically recalled.

5.2 App Remote Control

  • Through the paired mobile application, you can remotely arm/disarm the siren, trigger it manually, or adjust its settings.
  • You will receive instant notifications on your smartphone when the siren alarm is triggered, allowing you to check the event log within the app.

6. Maintenance

6.1 Battery Replacement

When the battery level is low, the device may indicate this via the app or a specific LED pattern. Replace the CR123A batteries as follows:

  1. Carefully remove the siren from its mounting location.
  2. Open the battery compartment cover.
  3. Remove the old batteries and insert new CR123A batteries, ensuring correct polarity.
  4. Close the battery compartment and remount the siren.

6.2 Cleaning

To clean the device, gently wipe its surface with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device.

7. Troubleshooting

  • Device not pairing: Ensure the device is in pairing mode (LED flashing rapidly), your Zigbee hub is online, and the device is within range of the hub. Try resetting the device by holding the reset button for several seconds until the LED indicates a reset.
  • No alarm sound/light: Check power supply (USB or batteries). Ensure the device is properly paired and configured in the app. Verify that the triggering sensor is functioning correctly.
  • App not connecting/receiving notifications: Ensure your smartphone has an active internet connection and the app has necessary permissions. Check the Zigbee hub's connection to your home network.
  • Settings not saving: The device has a memory function. If settings are not being restored, ensure the device is receiving stable power.

8. Specifications

FeatureSpecification
Power SupplyUSB 5V/1A or 2-3 x CR123A Batteries
Alarm Volume90dB
Operating Temperature0°C ~ 40°C (32°F ~ 104°F)
Working Humidity20% ~ 85%
Wireless Frequency2.4GHz
Network RangeUp to 55 meters
Wireless ProtocolZigbee 3.0 IEEE 802.15.4
DimensionsApprox. 68 x 68 x 33mm (2.68 x 2.68 x 1.30 inches)
Net Weight140g

9. User Tips

  • For optimal performance, ensure your Zigbee hub is centrally located and the alarm siren is within its effective range.
  • Regularly check the battery status via your smart home application to ensure continuous protection.
  • Consider placing the siren in a location where its sound can be heard throughout your home for maximum effectiveness.

For additional guidance, you may refer to the official user manual PDF available at: User Manual (PDF)

10. Warranty and Support

For warranty information, please refer to the terms and conditions provided by your retailer or contact the seller directly. If you encounter any issues, have inquiries, or require assistance with your ATUOTIN Smart Sound Light Alarm Siren, please feel free to contact the seller or manufacturer's support channels.

© 2023 ATUOTIN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.