Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your HOMEFISH 3000W 220V Electric Kitchen Water Heater Tap. Please read this manual thoroughly before use to ensure safe and efficient operation.

The HOMEFISH 3000W Electric Kitchen Water Heater Tap, featuring rapid heating and 360-degree rotation.
Important Safety Warnings
- This product is prohibited for outdoor use.
- For the first time use, ensure water runs through the tap before plugging in the power cord.
- The cold water temperature should not exceed 60 degrees Celsius.
- The water outlet must not be connected to any other faucet or choked flow components.
- Clean the nozzle regularly. Always disconnect power before cleaning. Do not wash the electric faucet directly with water.
- If water freezes in the faucet, do not connect to electricity.
- Ensure the faucet is properly connected to an earth line.
- The required water pressure is between 0.04MPa and 0.5MPa.
- After each use, turn the knob to the cold water area for 5 seconds to prevent scalding during subsequent use and to reduce incrustation, extending the heating element's service life.
- If the power line is damaged, it must be replaced by qualified personnel.
- Do not use other high-power electric appliances (e.g., air conditioning, induction cooker, electric kettle) simultaneously with this faucet.
- When connecting the power line, install a voltage level III all-pole disconnection device according to fixed wiring rules.
Product Features
- Instant Heating: Provides hot water in approximately 3 seconds, eliminating the need to wait for cold water to drain.
- Hot and Cold Water Functionality: A single handle allows for easy selection between hot and cold water.
- Smart Digital Display: Real-time temperature display for precise control and safer use.
- 360° Rotating Spout: Humanized design with a multi-purpose rotating water pipe for convenience in various kitchen tasks.
- Durable Construction: Features a 304 stainless steel heating core for quick, continuous hot water supply.
- Water and Electricity Separation: Built-in anti-electric wall design effectively prevents water leakage and electric shock.
- Safety Protections: Includes leakage protection (immediate disconnection upon abnormal temperature) and dry burn protection (automatic power-off).
- Energy-Saving: Designed for efficient operation, consuming only a few kWh per day for typical family use.

Overview of the instant hot water tap's key features.
Specifications

Product dimensions and technical parameters.
| Parameter | Value |
|---|---|
| Product Name | Instant Heating Electric Water Tap |
| Product Material | 304 Stainless Steel |
| Pipe Diameter | 1/2 inch (Standard 4-point pipe diameter) |
| Heating Tube Material | 304 Stainless Steel |
| Power Cross-section | 1.52 |
| Hot Water Temperature Range | 30~60°C (Max approx. 45-60°C) |
| Power Cord Specification | 1.1M long |
| Rated Voltage | 220V/50HZ |
| Working Water Pressure | 0.04-0.5MPa |
| Rated Power | 3000W |
| Waterproof Rating | IPX4 |
Package Contents
The package includes the instant heating electric water tap and all necessary accessories for installation, such as gaskets and fixing nuts. No additional tools are typically required for assembly.

The faucet comes with complete accessories for easy installation.
Setup and Installation
Preparation Work Before Installation
- Before installation, verify your electricity meter, electric brake, and fuse capacity can handle the faucet's rated current.
- Ensure there is a proper earth line in your plug base.
- Check that your actual voltage matches the voltage marked on the faucet (220V). If unsure, contact a local dealer.
Installation Method
- Remove any previous faucet. Install the new faucet using either the side or stand installation method (refer to diagrams). Securely connect it to the corresponding waterway. Install the safety valve between the city water pipe and the faucet's water inlet.
- Turn the faucet knob to allow water to flow. Check all connections for any water leakage. If no leaks are present, proceed to the next step.
- Connect the faucet to the power supply. Secure the faucet's power line to the wall using cable clips, ensuring not to damage the power line.
- To test, turn the knob to the hot water area. The digital display should light up and show the temperature, indicating heating has started. Turn the knob to the cold water area; the display should darken, and heating will stop.

Two wiring methods are available: on-table or under-counter routing.
Operation
Handle Switch Usage
The handle has a rotation range of 150 degrees. The hot water area is approximately 60 degrees, and the cold water area is also 60 degrees. The middle 30-degree area is a neutral position where no water flows.

Small handle turning option for hot and cold water selection.
Temperature Display
The digital display shows the current water temperature and indicates the heating status. When the screen is lit, the faucet is heating. If the screen is not lit, heating has stopped.

The smart digital display makes the temperature visible in real-time.
Maintenance
Nozzle Regular Cleaning
Open the nozzle and flush it under a high-pressure tap. If there is dirt inside that cannot be flushed out, use a needle to carefully poke and clear the blockage.
Heating Pipe Regular Cleaning
Open the cover of the heating pipe. Gently refresh the pipe using a toothbrush, then clean with water.
Troubleshooting
| Trouble | Possible Cause | Solution |
|---|---|---|
| Not heating water | No power or water pressure is too low. | Check the power supply. Ensure minimum water pressure is not less than 0.04MPa. |
| Water temperature low | Water pressure is too high or voltage is too low. | Reduce outlet water flow. Check the voltage supply. |
| Water temperature high, outlet water little | Inlet blocking or water pressure low. | Check and remove dirt at the inlet strainer. If the problem persists, water pressure may be too low. |
| Temperature display not bright | Water pressure too low, circuit fault, or tap fault. | Ensure water pressure is normal. Check the electrical circuit. Contact a local dealer if issues persist. |
Warranty and Support
For detailed warranty information, technical support, or service inquiries, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download, which contains additional guidance and contact information.
You can view the user manual PDF here.