M5Stack Cap LoRa 1262

Contents

M5Stack Cap LoRa 1262 for Cardputer Adv User Manual

Model: Cap LoRa 1262 (SKU: U214)

High-Performance LoRa + GNSS Communication Module

1. Product Overview

The M5Stack Cap LoRa 1262 is a high-performance communication expansion module designed to integrate LoRa communication and GNSS global positioning and navigation capabilities with the Cardputer-Adv. This module enhances the functionality of your Cardputer-Adv by providing robust long-range wireless communication and precise satellite positioning services.

It features an SX1262 LoRa transceiver for 868MHz ~ 923MHz frequency bands, offering long-distance, low-power wireless links suitable for Internet of Things (IoT) applications. The module also includes an AT6668 GPS chip with a built-in ceramic antenna, supporting multi-band and multi-constellation GNSS signals (GPS, BD2, BD3, GLONASS, GALILEO, QZSS) for accurate positioning with an accuracy of less than 1.5m (CEP50).

The module is equipped with an HY2.0-4P expansion interface for stable connection and further functional expansion with host devices. A shielding cover design is incorporated to improve anti-interference capabilities and overall performance.

M5Stack Cap LoRa 1262 module overview with labeled components
Figure 1: Cap LoRa 1262 Module Overview with Key Components. Labels include MIC ID, FCC ID, I2C Port.A, SMA connector, M2 Hole, SX1262 LoRa Transceiver, ATGM336H GNSS chip, internal GNSS antenna, and GPIO.EXT pins.

2. What's in the Box

The package for your M5Stack Cap LoRa 1262 module should contain the following items:

  • 1 x Cap LoRa-1262 Module
  • 1 x LoRa Rubber Antenna
Contents of the Cap LoRa 1262 package showing the module and antenna
Figure 2: Package Contents - Cap LoRa 1262 module and LoRa Rubber Antenna.

3. Features

  • Integrates LoRa modulation technology and GNSS global positioning system.
  • Operating frequency: 868~923 MHz.
  • Supports FSK, GFSK, MSK, GMSK, LoRa, and OOK modulation modes.
  • LoRa receiving sensitivity: down to -147 dBm (LoRa low data rate mode).
  • LoRa maximum transmission power: +22 dBm.
  • External RP-SMA antenna interface for LoRa, built-in ceramic antenna for GPS.
  • Positioning supports multiple satellite navigation systems (GPS/QZSS/BD2/BD3/GAL/GLO).
  • Multi-frequency and multi-system reception.
  • HY2.0-4P expansion interface.
  • Development Platform support: Arduino, UiFlow2.

4. Setup

The Cap LoRa 1262 module is designed for plug-and-play integration with the Cardputer-Adv via its EXT 2.54-14P Interface.

4.1 Connecting the Module

  1. Align the EXT 2.54-14P interface of the Cap LoRa 1262 module with the corresponding port on your Cardputer-Adv.
  2. Gently press the module into place until it is securely connected.
  3. Attach the LoRa Rubber Antenna to the SMA connector on the Cap LoRa 1262 module.
Cap LoRa 1262 module being connected to a Cardputer-Adv
Figure 3: Cap LoRa 1262 module connected to Cardputer-Adv.

4.2 Pin Map

The following table details the pin connections for the Cap LoRa 1262 module when connected to the Cardputer-Adv:

Cardputer-Adv Pin Cap LoRa-1262 (LoRa) Cap LoRa-1262 (GPS) Cap LoRa-1262 (PI4IOE5V6408) Cap LoRa-1262 (HY2.0-4P)
G3RST
G4IRQ
G6BUSY
G40SCK
G14MOSI
G39MISO
G5NSS
G13GPS-RX
G15GPS-TX
G8SDASDA
G9SCLSCL

To initialize the LoRa module, enable the RF antenna switch by setting P0 of the PI4IOE IO expansion chip to a high level.

5. Operating Instructions

Once connected to the Cardputer-Adv, the Cap LoRa 1262 module enables various communication and positioning functionalities. The module is designed for ease of use, allowing for quick deployment in different scenarios.

5.1 Basic Operation

The module operates in conjunction with the Cardputer-Adv's software environment. Depending on the loaded application, you can utilize the LoRa communication for sending and receiving messages or the GNSS for positioning data.

Video 1: Demonstration of Cap LoRa 1262 module in use with Cardputer-Adv, showing message sending and GPS functionality.

5.2 Applications

The Cap LoRa 1262 module is suitable for a wide range of applications, including:

  • Remote data acquisition
  • Smart cities infrastructure
  • Smart homes automation
  • Vehicle positioning and navigation
  • General Internet of Things (IoT) device positioning and communication
Examples of Cap LoRa 1262 applications: IoT device positioning, Smart cities, Smart homes, Vehicle positioning and navigation
Figure 4: Visual examples of the Cap LoRa 1262 module's application scenarios.

6. Maintenance

To ensure the longevity and optimal performance of your Cap LoRa 1262 module, follow these general maintenance guidelines:

  • Keep the module clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Avoid exposing the module to extreme temperatures, humidity, or direct sunlight.
  • Handle the module with care to prevent physical damage to the connectors or components.
  • Ensure the LoRa antenna is securely attached during operation to maintain signal integrity.
  • Store the module in a dry, anti-static environment when not in use.

7. Troubleshooting

If you encounter issues with your Cap LoRa 1262 module, consider the following troubleshooting steps:

  • Connection Issues: Ensure the module is firmly seated in the Cardputer-Adv's expansion interface. Check for any bent or damaged pins.
  • LoRa Communication Failure: Verify the LoRa antenna is correctly attached. Check your software configuration for correct frequency band (868-923 MHz) and LoRa parameters. Ensure the RF antenna switch is enabled (P0 of PI4IOE IO expansion chip set to high).
  • GNSS Positioning Inaccuracy/No Fix: Ensure the module has a clear line of sight to the sky. Indoor environments or areas with heavy obstruction can degrade GPS performance. Check for proper initialization of the GPS module in your software.
  • Power Issues: Confirm that the Cardputer-Adv is adequately powered. The LoRa module operates at DC 5V@163.4mA.
  • Software/Firmware: Ensure you are using the correct and up-to-date libraries and firmware for your development platform (Arduino, UiFlow2). Refer to the official M5Stack documentation for the latest resources.

8. Specifications

Detailed technical specifications for the Cap LoRa 1262 module:

Specification Parameter
LoRa ModuleSX1262
LoRa Frequency Range868 ~ 923 MHz
LoRa Programmable BitrateUp to 300kbps
LoRa Communication InterfaceSPI
LoRa AntennaSize 108 x 9.3mm, Interface Type RP-SMA (internal thread, internal hole), Gain 3dBi
LoRa Transmit Power+22dBm
LoRa Receiver Sensitivity-147dBm (LoRa Low Data Rate Mode)
LoRa Operating CurrentDC 5V@163.4mA
Supported Modulation ModesFSK / GFSK / MSK / LoRa / OOK
GPS ModuleATGM336H-6N@AT6668
GPS Communication InterfaceUART, default 115200bps@8N1
Supported GNSS SystemsGPS / QZSS / BD2 / BD3 / GAL / GLO
Frequency BandsBDS: B1I+B1C, GPS / QZSS / SBAS: L1, GALILEO: E1, GLONASS: R1
GPS Channels50 Channels
GPS Positioning Accuracy<1.5m (CEP50)
GPS Update RateUp to 10Hz
GPS ProtocolNMEA 0183 4.1
GPS SensitivityTracking: -162dBm, Acquisition: -160dBm, Cold Start: -148dBm
GPS Time to First FixCold Start: 23s, Hot Start: 1s
Power Consumption (Power On)33.1mA
Product Size84.0 x 24.0 x 15.2mm
Product Weight22.1g (excluding antenna)
Package Size170.0 x 120.0 x 17.0mm
Gross Weight31.6g

8.1 Module Dimensions

Diagram showing the dimensions of the Cap LoRa 1262 module
Figure 5: Cap LoRa 1262 Module Dimensions (84mm length, 24mm width, 15.2mm height).

9. Schematics

For detailed circuit diagrams and electrical connections, please refer to the official schematics:

  • Cap LoRa-1262 Schematics PDF (Referenced in documentation)
  • Stamp LoRa-1262 Mini Schematics PDF (Referenced in documentation)

A visual representation of the schematics is provided below:

Cap LoRa 1262 schematic diagram
Figure 6: Cap LoRa 1262 Schematic Diagram (Partial view).

10. Software and Development Resources

M5Stack provides various resources to help you develop applications for the Cap LoRa 1262 module:

  • Development Platforms: Arduino, UiFlow2
  • Documentation: Access tutorials and guides on the official M5Stack website (m5stack.com) under the 'DOCUMENT' section.
  • Libraries:
    • Cap LoRa-1262 Arduino Quick Start
    • Cap LoRa-1262 Arduino LoRa Driver Library
    • Cap LoRa-1262 Arduino GPS Driver Library
Flowchart showing how to access tutorials on the M5Stack website
Figure 7: Steps to access tutorials on the M5Stack website.

11. User Tips

  • Antenna Tuning: For optimal LoRa performance, consider checking the antenna's Standing Wave Ratio (SWR) using a NanoVNA or similar tool. Users have reported excellent SWR values (e.g., 1.08 for 868MHz) with the provided antenna.
  • Authenticity: Ensure you purchase from official M5Stack channels or authorized resellers to guarantee genuine products.
  • Initial Testing: Before critical deployment, perform basic functionality tests for both LoRa communication and GNSS positioning to confirm proper operation.

12. Warranty and Support

For warranty information, technical support, and further assistance, please refer to the official M5Stack website or contact their customer service directly. Keep your purchase records for any warranty claims.

Official Website: www.m5stack.com

User manual PDF: View User Manual (PDF)

© 2024 M5Stack. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.