VODOOL AK-170

Contents

AK-170 Mini Pure Power Digital Amplifier

Model: AK-170

Introduction

The AK-170 is a high-fidelity mini audio power amplifier designed to deliver clear, strong, and powerful stereo sound. Its compact size and robust aluminum alloy body make it suitable for various audio setups, from home theaters to portable applications. This manual provides essential information for setting up, operating, and maintaining your amplifier.

Package Contents

  • 1 x AK-170 Mini Pure Power Digital Amplifier
  • 1 x User Manual (this document)
  • Note: A 12V DC power adapter is typically required and may be sold separately.

Setup Instructions

Follow these steps to connect your AK-170 amplifier to your audio sources and speakers.

Rear panel connections of the AK-170 amplifier

Figure 1: Rear panel connections showing audio input, speaker outputs, and 12V DC power input.

  1. Connect Audio Input: Use an RCA cable to connect your audio source (e.g., smartphone, tablet, PC, TV, CD player) to the 'AUDIC INPUT' (Left and Right RCA jacks) on the rear panel of the amplifier.
  2. Connect Speakers: Connect your passive speakers to the 'Right channel output' and 'Left channel output' terminals. Ensure correct polarity (+ to + and - to -) for optimal sound. The amplifier supports speakers with 4-16Ω impedance.
  3. Connect Power: Connect a 12V DC power adapter (5.5*2.1mm plug) to the '12v power input' jack on the rear panel. Ensure the power adapter is rated for sufficient current (e.g., 2A or higher).
  4. Power On: Once all connections are secure, turn on the amplifier using the power switch or knob (if available) on the front panel.

Operating Instructions

The AK-170 amplifier features intuitive controls for adjusting your audio experience.

Front view of the AK-170 amplifier with controls

Figure 2: Front panel controls including Power, Volume, Bass, and Treble knobs.

  1. Power On/Off: Locate the 'POWER' knob or switch on the front panel. Turn it to the 'ON' position to power on the amplifier. The blue LED lights around the main volume knob will illuminate.
  2. Volume Control: The large central knob labeled 'VOLUME' controls the overall output level. Rotate clockwise to increase volume and counter-clockwise to decrease it. Start with a low volume setting before playing audio.
  3. Bass Adjustment: Use the 'BASS' knob to adjust the low-frequency response of your audio. Rotate clockwise for more bass, counter-clockwise for less.
  4. Treble Adjustment: Use the 'TREBLE' knob to adjust the high-frequency response of your audio. Rotate clockwise for more treble, counter-clockwise for less.

The AK-170 is versatile and can be used in various scenarios:

Diagram showing wide applications of the AK-170 amplifier

Figure 3: Wide application scenarios for the AK-170 amplifier, including home audio, computer, mobile phone, car, motorcycle, classroom, and outdoor activities.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the amplifier's exterior. Do not use liquid cleaners or aerosols.
  • Ventilation: Ensure the amplifier has adequate ventilation to prevent overheating. Do not block any vents.
  • Storage: When not in use for extended periods, store the amplifier in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Handle the unit with care. Avoid dropping or subjecting it to strong impacts.

Troubleshooting

No Sound Output

  • Check if the amplifier is powered on and the blue LED lights are illuminated.
  • Verify that the audio source is playing and its volume is turned up.
  • Ensure all audio input and speaker connections are secure and correctly wired.
  • Adjust the 'VOLUME' knob on the amplifier.
  • Test with a different audio source or speakers to isolate the problem.

Distorted or Poor Sound Quality

  • Reduce the volume level on both the amplifier and the audio source.
  • Check speaker wire connections for proper polarity and ensure no stray strands are touching.
  • Adjust the 'BASS' and 'TREBLE' controls to a neutral position or to your preference.
  • Ensure the audio source is providing a clean signal.
  • Verify that your speakers' impedance is within the 4-16Ω range.

Specifications

FeatureDetail
Brand NameVODOOL
ModelAK-170
ColourBlack
MaterialAluminum Alloy
Channels2 (2.0)
Input VoltageDC 12V
Effective Power Per Channel20W + 20W
Maximum Power Per Channel200W + 200W
Load Impedance4-16Ω
Signal to Noise Ratio>70 dB
Frequency Response20Hz-20kHz
Distortion Rate0.01%
Product Dimensions (L*W*H)125mm * 75mm * 40mm
Product Weight200g

User Tips

  • For best sound quality, use high-quality audio cables and speakers.
  • Avoid placing the amplifier near sources of strong electromagnetic interference.
  • If using with a car, ensure the 12V power supply is stable and properly fused.
  • Experiment with the Bass and Treble controls to find the sound profile that best suits your music and listening environment.

Warranty and Support

For detailed warranty information and further support, please refer to the official product documentation. A digital version of the user manual (PDF) can be accessed here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.