1. Product Overview
This underwater lamp is specifically designed for underwater environments, compatible with aquariums, swimming pools, and landscape ponds, featuring robust waterproof performance. It provides decorative and auxiliary lighting with simple operation and convenient installation. Supporting multiple lighting modes, it is suitable for home landscapes and aquarium maintenance scenarios, enhancing the ambiance of underwater settings.
2. Features
- 16 Colors: Offers a wide range of colors for various moods and decorations.
- Remote Control: Conveniently adjust settings from a distance.
- IP68 Waterproof Rating: Designed for deep water resistance, suitable for prolonged submersion.
- Adjustable Brightness: Customize light intensity to suit your needs.
- Long Lifespan: Equipped with 3pcs RGB super bright 3030SMD LED chips for extended use.
- Durable Construction: Light case made of high-quality PVC, ensuring durability and wear-resistance.
- Environmental Protection: Designed with environmentally friendly materials.
3. Specifications
| Parameter | Value |
|---|---|
| Model Number | SC-008 |
| Material | Environmentally friendly plastic (ABS Shell) |
| LED Source | 3pcs RGB 3030SMD LED chips (LED bulbs) |
| Waterproof Level | IP68 (Deep water resistance) |
| Light Battery | 2 x CR2032 Button Cell battery (included) |
| IR Remote Battery | 1 x CR2025 Button Cell battery (included) |
| Signal Range (Remote) | 8-10m (recommended not to exceed 5 meters underwater) |
| Voltage | 6 V |
| Power Source | DC |
| Light Dimensions (Diameter x Height) | 33.5mm x 18mm |
| Light Weight | 17g |
| Remote Control Dimensions | 51.5mm x 85mm x 6.5mm |
| Remote Control Weight | 16g |
| Application | Swimming pool, aquariums, small pools, landscape ponds (recommended depth < 1.5 meters) |
4. Setup and Installation
- Prepare the Light: Before use, please remove the insulation sheet from the lamp.
- Ensure Waterproofing: Before installation, ensure the waterproof cover of the underwater light is securely tightened to prevent water ingress and damage.
- Clean Installation Area: Select a flat and smooth wall surface (e.g., glass or tiles) within the aquarium or pool. Wipe the surface with a dry cloth to remove water stains and dust, ensuring the installation surface is free from oil stains to prevent unstable fixation.
- Fixation (Suction Cup Type): Remove the protective film from the suction cup surface. Press the suction cup tightly against the desired installation position, and firmly press to expel internal air to ensure secure adhesion to the wall.
- Install the Underwater Light: Insert the light into the suction cup's mounting slot. Adjust the illumination angle as needed (e.g., toward aquatic plants or decorative rocks). Verify secure fixation with no looseness or wobbling.
- Final Waterproof Inspection: After installation, re-examine the underwater light to ensure the waterproof cover is securely tightened with no gaps, preventing water ingress during underwater use.
5. Operating Instructions
5.1 Touch Control (Basic Model)
- Power On: Tap the touch switch on the lamp surface (short press, touch duration ≤1 second) to activate the underwater light. The default lighting mode is always on.
- Mode Switching: After power-on, tap the touch switch again to cycle through lighting modes or switch light colors, selecting the appropriate mode based on your needs.
- Power Off: In any mode, tap the touch switch (hold briefly) to turn off the underwater light.
5.2 Remote Control
- Power On/Off: Press the "On/Off" button on the remote control to turn the underwater light on or off without touching the lamp.
- Mode Switching: Press the "Mode" button on the remote control to cycle through modes such as always-on, gradient, and flashing. Some remotes support individual color selection (e.g., red, blue, green, warm white). Press the corresponding color button to switch.
- Brightness/Speed Adjustment: Use the "+" and "-" buttons on the remote control to adjust light brightness. If the mode supports speed adjustment (e.g., gradual speed, flashing frequency), adjust using the corresponding buttons to match different ambiance requirements.
- Remote Control Distance: It is recommended that the remote control distance does not exceed 5 meters to avoid obstructions. For underwater remote control, ensure the remote is above water to prevent water ingress.
6. Maintenance
- Battery Care: After testing the lights, it is recommended to remove the battery or place protective equipment (a small white flake) to prevent slow battery consumption when not in use.
- Battery Replacement (Rechargeable Models): If the underwater light dims, flickers, or fails to turn on, it indicates low battery power. Remove the light to charge it. For models with replaceable batteries, replace with a new battery.
- Cleaning: When removing the light from its suction cup/support, wipe the surface of the lamp body with a dry cloth to remove water stains, preventing moisture from entering the charging interface or battery compartment.
7. Troubleshooting
- Light Dims/Flickers/Doesn't Turn On: This usually indicates low battery power. Replace the CR2032 batteries in the light. For rechargeable models, recharge the unit.
- Remote Control Not Working: Ensure the remote control's CR2025 battery is not depleted. Check if the insulation sheet has been removed from the remote's battery compartment. Ensure you are within the recommended 5-meter range and there are no obstructions.
- Water Leakage: Immediately remove the light from water. Check that the waterproof cover is securely tightened and that the waterproof ring is properly seated and undamaged. Ensure no gaps are present.
- Light Not Sticking: Ensure the installation surface is flat, smooth, clean, and free of oil stains. Press firmly to expel all air from under the suction cup.
8. User Tips
- For best results in pools or larger water features, consider using multiple lights to create a more vibrant and evenly distributed illumination.
- When decorating for holidays like Halloween, place the lights inside or near translucent decorations like pumpkins for a glowing effect.
- To prolong battery life, turn off the lights when not in use, especially if using the touch control model without a remote.
- Experiment with different color modes (Flash, Strobe, Fade, Smooth) to match the ambiance of your event or setting.
9. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the seller directly through the platform where the product was purchased. Keep your purchase receipt or order number handy for faster service.
A user manual in PDF format is available for download. Please refer to the seller's product page for the direct link to the PDF document: User manual (PDF)