Introduction
This manual provides essential instructions for the safe and effective use of your JETTING Solar Powered LED Warning Light. This device is designed to provide a wireless flashing warning light for various applications, including cars and tractors, utilizing solar power for charging and magnetic or screw-based fixing for easy installation.
Safety Information
Warnings:
- CHOKING HAZARD - Small parts. Not for children under 3 years.
- Ensure clear visibility of the light for safety.
General Safety:
- Keep the light dry and free from moisture.
- Wipe with a damp cloth for cleaning and avoid harsh chemicals.
Quick Start Guide (Setup)
- Unbox the solar warning light. Carefully remove the light from its packaging.
- Choose a suitable location for installation. For optimal performance, select a spot on the vehicle roof or other appropriate surface that receives direct sunlight.
- Secure the light in place. Use either the magnetic base for temporary attachment or screws for a more permanent installation.
- Ensure optimal charging. Position the light so that its solar panel is exposed to direct sunlight throughout the day for efficient charging.
Operation
The JETTING Solar Powered LED Warning Light operates automatically based on light conditions and its internal switch. Ensure the switch is in the 'ON' position for operation.
- Automatic Charging: The integrated solar panel charges the internal battery during daylight hours when exposed to direct sunlight.
- Light Control: The device features a light sensor that automatically activates the flashing function when ambient light levels are low (e.g., at dusk or in dark conditions).
- Flashing Mode: The light emits a strobe flash, with a frequency of 60-90 times per minute, to provide a clear warning signal.
- Switch: A manual switch is present to turn the device completely off when not needed, conserving battery life.
Maintenance
- Cleaning: Regularly wipe the lampshade and solar panel with a damp cloth to remove dust and debris. This ensures optimal light transmission and charging efficiency. Avoid using abrasive cleaners or harsh chemicals.
- Storage: If storing the light for an extended period, ensure it is fully charged and stored in a dry, cool place. Periodically expose it to sunlight to maintain battery health.
Troubleshooting
Light is not flashing:
- Check the switch: Ensure the power switch on the device is in the 'ON' position.
- Verify charge: Make sure the solar panel has received sufficient direct sunlight for charging. If the battery is depleted, it may not flash.
- Ambient light: The light sensor activates the flashing only in low light conditions. Test the light in a dark environment.
Light is not charging:
- Solar panel exposure: Ensure the solar panel is clean and directly exposed to sunlight without obstruction.
- Daylight hours: Charging requires direct sunlight throughout the day. Cloudy conditions or shaded areas will reduce charging efficiency.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | JETTING |
| Item Type | STROBE LIGHT |
| Origin | Mainland China |
| Light source | LED light |
| Material | Lampshade PC, Base ABS |
| Control | Light control + Switch |
| Charging time | Direct sunlight all day |
| Fixing method | Magnetic suction, Screw installation |
| Lighting method | Strobe |
| Flash frequency | 60-90 times/min |
| Product size | 12 cm (diameter) * 11 cm (height) |
User Tips
- For consistent performance, ensure the solar panel is cleaned regularly and positioned to receive maximum direct sunlight, especially during winter months or in areas with less intense sun.
Warranty and Support
For any issues or further assistance, please contact our store support. A comprehensive user manual in PDF format is available for download at User manual (PDF).