1. Introduction
The SAMZHE 2 Port PoE Extender is designed to extend the reach of Power over Ethernet (PoE) connections, allowing for longer cable runs and the connection of multiple PoE-powered devices from a single PoE source. It supports IEEE standard PoE and is ideal for network surveillance cameras, wireless access points, and other network devices, providing stable and reliable data and power transmission without the need for additional power supplies at the device location.
2. Product Features
- 8-Core Network Port Design: Ensures stable and secure data transmission by minimizing crosstalk. Features anti-oxidation and good conductivity.
- Plug and Play: No external power supply required for the extender itself.
- Long-Distance Transmission: Extends PoE signal and power up to 200 meters, eliminating network delay and image blur.
- PoE Repeater Functionality: Splits one input to two outputs, allowing a single network cable to connect two devices.
- Multi-level Cascade Mode: Supports connecting multiple extenders in series to further extend reach.
- Dual Indicator Lights: Power (yellow) and Signal (green) indicators for quick status confirmation.
- Durable Construction: Made with ABS thickened shell for wear resistance and high-temperature tolerance, suitable for outdoor environments.
3. Setup Instructions
The SAMZHE PoE Extender is designed for simple plug-and-play installation. Follow these steps to set up your device:
-
Identify Ports: The extender has one input port labeled "POE IN" and two output ports labeled "POE OUT1" and "POE OUT2".
Figure 1: SAMZHE PoE Extender with Input and Output Ports
Figure 2: Interface Description with Voltage Information -
Connect Input: Connect a standard PoE switch or other PoE-enabled network device to the "POE IN" port of the extender using an Ethernet cable. This port receives both data and power.
Figure 3: Example of PoE Extender in a Plug-and-Play Setup - Connect Outputs: Connect your PoE-powered devices, such as network surveillance cameras or wireless APs, to the "POE OUT1" and "POE OUT2" ports using Ethernet cables. These ports will transmit both data and power to the connected devices.
-
Cascading Connection (Optional): For extending the range further, you can connect multiple PoE extenders in series. The output of one extender can serve as the input for the next. Refer to the diagram below for an illustration of multi-level cascading.
Figure 4: Connection Schematic Diagram for Single and Multi-level Cascading Note: The number of connections in a cascade is affected by the total power requirements of the connected devices. Please refer to the specific usage environment and power budget.
4. Operating Instructions
Once connected, the PoE Extender operates automatically:
- Power On: Ensure your PoE switch or injector connected to the "POE IN" port is powered on.
- Automatic Recognition: The extender will automatically identify and allocate network lines to the connected devices.
-
Indicator Lights: Observe the indicator lights on the extender for operational status:
- Yellow Light (Power Indicator): A steady yellow light indicates that the power supply is normal.
- Green Light (Signal Indicator): A flashing green light indicates that data transmission is normal.
Figure 5: Power and Signal Indicator Lights
Watch this video for a visual demonstration of the product and its features:
5. Maintenance
The SAMZHE PoE Extender is built for durability and requires minimal maintenance:
- Physical Inspection: Periodically check the device and cables for any visible damage or loose connections.
- Cleaning: Keep the device free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
- Environmental Considerations: The ABS thickened shell provides wear resistance and high-temperature tolerance, making it suitable for various environments, including outdoor use. However, avoid exposing the device to extreme conditions beyond its operating temperature range.
- Cable Quality: Ensure high-quality Ethernet cables are used for optimal performance and to maintain signal integrity over long distances. The 8-core network port design is optimized for stable data transmission.
6. Troubleshooting
If you encounter issues with your PoE Extender, consider the following troubleshooting steps:
- No Power to Devices:
- Check if the yellow power indicator light on the extender is on. If not, ensure the upstream PoE switch/injector is powered and providing PoE to the extender's "POE IN" port.
- Verify that the Ethernet cable from the PoE source to the extender is securely connected and functional.
- Ensure the connected devices are PoE-compatible and within the extender's power budget (max 30W per port).
- No Data Transmission / Blurry Image / Latency:
- Check if the green signal indicator light on the extender is flashing. If not, verify all Ethernet cable connections are secure.
- Ensure the Ethernet cables used are of good quality and meet network standards.
- If using multi-level cascading, ensure the total cable length does not exceed the recommended maximum (up to 200 meters total for stable transmission).
- Restart the connected PoE devices and the upstream PoE switch/injector.
- Device Not Recognized:
- Confirm that the connected device is properly configured and functioning independently.
- Ensure the extender's ports are clean and free from obstruction.
7. Specifications
| Feature | Specification |
|---|---|
| Model | 2 Port PoE Extender |
| PoE Standard | IEEE Standard PoE |
| Input/Output Voltage | 44-57V |
| Max Single-Port Power | 30W |
| Transmission Rate | 100/1000Mbps (depending on variant) |
| Transmission Distance | Up to 200 meters (after connection) |
| Network Ports | 1x PoE IN, 2x PoE OUT (8-core design) |
| Shell Material | ABS thickened shell |
| Dimensions (L x W x H) | Approx. 12 cm x 10 cm x 8 cm |
| Weight | Approx. 0.07 kg |
8. User Tips
- For optimal performance, always use high-quality Ethernet cables (Cat5e or Cat6 recommended) for all connections.
- When planning a cascaded setup, calculate the total power consumption of all connected devices to ensure the upstream PoE source can provide sufficient power.
- Regularly check the indicator lights to quickly assess the operational status of the extender and connected devices.
- If installing in an outdoor environment, ensure the connections are properly sealed and protected from direct exposure to harsh weather conditions, despite the device's durable casing.
9. Warranty and Support
For detailed warranty information and technical support, please refer to the official SAMZHE website or contact your retailer. A comprehensive user manual in PDF format may also be available for download from the manufacturer's support page. (Reference: User manual (PDF))