PowerMotor W2026-MOTO

Contents

Motorcycle Air Filter Sports Intake

Model: W2026-MOTO

1. Product Overview

The PowerMotor Motorcycle Air Filter Sports Intake is designed to enhance engine performance by increasing airflow and improving throttle response. It features a fine mesh for efficient filtration and is washable and reusable.

Two PowerMotor motorcycle air filters, one 28mm and one 58mm, shown from the top-front angle.

Figure 1: PowerMotor Motorcycle Air Filter (28mm and 58mm variants)

Video 1: Product demonstration of the air filter.

2. Safety Warnings

  • Always wear a helmet and appropriate protective gear when riding.
  • Do not install the air filter while the engine is running or hot.
  • Professional installation is recommended if you are unfamiliar with motorcycle maintenance.
  • Do not use damaged or modified parts.
  • Keep the product away from heat, open flames, and sharp objects.
  • This product is intended for off-road / road use only.

3. Setup and Installation

Installation Steps

  1. Clean the intended installation position thoroughly and ensure it is dry.
  2. Align the air filter with the original mounting holes on your motorcycle.
  3. Use the supplied screws or accessories to securely fix the air filter in place.
  4. Tighten all fasteners properly. Do not overexert force to avoid damaging the product or mounting points.
  5. Before operating your motorcycle, check the stability and functionality of the installed air filter.
PowerMotor air filter with 38mm inner diameter indicated by an arrow.

Figure 2: Example of air filter with 38mm inner diameter, crucial for proper fitment.

4. Operating Instructions

General Usage

  • Adjust the air filter's position or orientation if necessary, according to your specific riding needs and motorcycle configuration.
  • The air filter is designed to draw more air into your engine, improving throttle response and increasing horsepower.
  • The fine mesh design helps straighten airflow and prevents the engine from sucking in hot air from the engine compartment.
  • If you notice any abnormal engine behavior or sounds after installation, stop using the product immediately and inspect it.

Bluetooth/Electronic Accessories (If Applicable)

This section is for models that include integrated electronic features. If your model does not have these features, please disregard.

  1. Charge the device for at least 1 hour before its first use.
  2. Turn on the Bluetooth function on the device.
  3. Search for the device name on your smartphone or other Bluetooth-enabled device.
  4. Connect using the password: 0000 or 1234.
  5. The device supports music playback, hands-free calls, and FM radio functions.

5. Maintenance

  • Keep the air filter clean and dry to ensure a longer service life and optimal performance.
  • Do not use strong chemicals or abrasive cleaners, as these can damage the filter material.
  • Regularly check all screws and connection parts for tightness. Re-tighten if necessary.
  • Store the air filter in a cool, dry place away from direct sunlight if it is not installed.
  • Replace worn or damaged parts in a timely manner to maintain performance and safety.
  • The filter is washable and reusable. Clean it according to standard air filter cleaning procedures (e.g., using a mild detergent and water, then allowing it to air dry completely).

6. Troubleshooting

  • Issue: Air filter feels loose after installation.
    Solution: Reinstall the air filter, ensuring it is properly aligned and all clamps/screws are tightened securely.
  • Issue: Electronic accessories (if applicable) have no power.
    Solution: Check the charging cable and ensure it is properly connected. Verify the device is fully charged.
  • Issue: Poor Bluetooth connection.
    Solution: Ensure the device is within range. Clean the contact points if applicable, and try re-pairing the device.

7. Specifications

FeatureDetail
Brand NamePowerMotor
ModelW2026-MOTO
Item TypeAir Filters & Systems
OriginMainland China
MaterialStainless Steel + Rubber (some components may include ABS, Aluminum Alloy, Steel, PC Lens)
Suitable For125cc / 250cc / 400cc Street Bikes, Off-road Bikes, Scooters
Available Inner Diameters28mm, 32mm, 35mm, 38mm, 42mm, 44mm, 47mm, 50mm, 58mm
Package Dimensions (approx.)Length: 7 cm, Width: 5 cm, Height: 4 cm
Package Weight (approx.)0.1 kg

Size Reference Images

Air filter with 28mm inner diameter indicated.
28mm Diameter
Air filter with 32mm inner diameter indicated.
32mm Diameter
Air filter with 35mm inner diameter indicated.
35mm Diameter
Air filter with 38mm inner diameter indicated.
38mm Diameter
Air filter with 42mm inner diameter indicated.
42mm Diameter
Air filter with 44mm inner diameter indicated.
44mm Diameter
Air filter with 47mm inner diameter indicated.
47mm Diameter
Air filter with 50mm inner diameter indicated.
50mm Diameter
Air filter with 58mm inner diameter indicated.
58mm Diameter

8. User Tips

  • When selecting your air filter, ensure the inner diameter matches your motorcycle's intake pipe for a secure and effective fit.
  • Periodically check the filter for debris accumulation, especially if riding in dusty conditions, to maintain optimal engine performance.
  • If the rubber installation port appears slightly deformed, gently tighten the hoop clamp during installation; this will typically secure it without affecting performance.

9. Warranty and Support

After-Sales Service

  • If you have any questions or encounter issues with your product, please contact our customer support team first.
  • We aim to reply to all inquiries within 24 hours and provide a suitable solution.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.