GGBEE wall light indoor

Contents

GGBEE Magnetic LED Wall Lamp User Manual

Model: wall light indoor

Brand: GGBEE

Introduction

Thank you for purchasing the GGBEE Magnetic LED Wall Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read it thoroughly before installation and operation, and keep it for future reference.

Safety Instructions

  • Do not expose the lamp to extreme temperatures, direct sunlight, or high humidity.
  • Keep the lamp away from water and other liquids.
  • Do not attempt to disassemble or modify the lamp. This may cause damage and void the warranty.
  • Use only the provided USB cable or a certified equivalent for charging.
  • Keep out of reach of children.
  • The battery in this lamp is non-replaceable. When the battery life reaches its limit, the lamp will become unusable.

Package Contents

  • 1 x Magnetic LED Wall Lamp
  • 1 x USB Charging Cable (Type-C)
  • 1 x Adhesive Metal Patch
  • 1 x User Manual (this document)

Setup

1. Charging the Lamp

Before first use, fully charge the lamp. Connect the USB charging cable to the Type-C port on the lamp base and plug the other end into a power outlet (e.g., USB wall adapter, computer USB port). The USB interface indicates the charging process. For optimal charging, allow the battery to charge for more than 4 hours. When fully charged, the green light on the USB socket will turn off.

Type-C charging port on the lamp base connected to a wall adapter

Figure 1: Type-C Charging Port

2. Installation

The lamp features a magnetic base for easy, no-hole installation. It can be attached to any flat, clean surface using the provided adhesive metal patch.

  1. Step 1: Choose a desired location on a flat surface (e.g., wall, cabinet, headboard). Ensure the surface is clean and dry.
  2. Step 2: Remove the protective film from one side of the adhesive metal patch. Firmly press the adhesive side onto the chosen location.
  3. Step 3: Align the magnetic base of the lamp with the metal patch. The lamp will securely attach due to strong magnetic attraction.
Three-step installation guide showing removing sticky paper, attaching patch, and magnetizing fixture

Figure 2: Simple Three-Step Installation

The lamp is equipped with a strong magnet, ensuring it adheres firmly and does not fall off. Adhesive-backed patches are suitable for flat surfaces such as walls, wooden boards, glass, metal, and plastic tiles.

Lamp magnetically attached to a wall above books

Figure 3: Strong Magnetic Attraction

Operating Instructions

Magnetic no-hole rechargeable wall lamp with touch control and 3 light colors

Figure 4: Lamp Overview with Touch Control

1. Power On/Off and Light Color Selection

Locate the touch-sensitive button on the lamp base. Lightly press this button to:

  • Turn the lamp ON.
  • Cycle through the three available light color modes: White Light, Yellow Light (Warm Light), and Neutral Light.
  • Turn the lamp OFF after cycling through all modes.
Lamp showing white light, yellow light, and neutral light options

Figure 5: Switching Light Colors

2. Brightness Adjustment (Dimming)

When the lamp is ON, long press the touch-sensitive button to continuously adjust the brightness. Release the button when you reach your desired brightness level. This allows for infinite dimming from 10% to 100% brightness.

Diagram showing long press for brightness adjust and lightly press for lamp switch

Figure 6: Infinite Dimming Function

3. Adjusting Light Direction

The lamp head can be manually adjusted 90 degrees up and down to direct the light precisely where needed.

Lamp head adjustable 90 degrees up and down

Figure 7: 90° Adjustable Lamp Head

Maintenance

1. Cleaning

To clean the lamp, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components.

2. Battery Care

  • For optimal battery performance, we recommend fully discharging and recharging the lamp within the first 10 cycles of use.
  • After the battery is depleted, charge it as soon as possible. Leaving the battery empty for extended periods can reduce its lifespan.
  • Charge the lamp at least once a month, even if not in regular use, to maintain battery health.
  • If the light output becomes insufficient, avoid charging the lamp while it is in use to protect the battery.

Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn onBattery is depletedCharge the lamp for at least 4 hours.
Lamp does not chargeUSB cable or power adapter faultyTry a different USB cable or power adapter. Ensure connections are secure.
Light flickers or is dimLow batteryCharge the lamp fully.
Lamp falls off wallSurface not clean/smooth; adhesive wornEnsure surface is clean and dry before applying patch. Reapply with a new adhesive patch if necessary.

Specifications

FeatureSpecification
Product NameLED Rechargeable Wall Lamp
Model Numberwall light indoor
Input Current2A
Input VoltageDC5V
Battery Capacity2000mAh
Power1.6W
Working Time6 - 8 hours (on a full charge)
Product MaterialABS (Body Material: Plastic, Shade Type: Plastic)
Light SourceLED
Luminous Flux<60
Voltage12 V
Lighting Area1-3 square meters
Installation MethodSelf-contained (Magnetic, Wall Mounted)
Switch TypeTouch On/Off Switch
Is DimmableYes
Shade DirectionUp
CertificationCE, FCC, ROHS
Product parameter diagram showing dimensions: 8cm height, 6.7cm depth, 3cm lamp head diameter, 2.5cm base thickness

Figure 8: Product Dimensions and Parameters

User Tips

  • For bedside use, position the lamp slightly above eye level to minimize direct glare while reading.
  • Experiment with different light colors (white, yellow, neutral) to find what best suits your activity or mood. Warmer tones are often preferred for relaxation, while cooler tones can be better for tasks.
  • The magnetic attachment allows for easy repositioning; consider moving the lamp to different areas of your home as needed for task lighting or ambiance.

Warranty and Support

For any warranty claims, technical support, or inquiries regarding your GGBEE Magnetic LED Wall Lamp, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2023 GGBEE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.