1. Product Description
The Tuya Zigbee Smart Soil Moisture Sensor is designed to monitor the soil moisture, ambient temperature, and humidity for your plants. This device helps you maintain optimal growing conditions for various plants, whether in potted plants, vegetable greenhouses, farmlands, or gardens. It integrates with the Tuya Smart Life app and requires a Zigbee gateway for full functionality, allowing for remote monitoring and smart automation.
Description: This image displays two soil moisture sensors inserted into soil next to a plant. A hand holds a smartphone showing the 'Moisture Detector' app interface with readings for air temperature (29.3°C), humidity value (66%), and soil moisture (73%). Logos for Tuya, Zigbee, Google Home, and Amazon Alexa are visible, indicating compatibility.
Product Components
Description: A diagram of the soil moisture sensor with labels pointing to its key components: Battery Cover, Reset Key, Indicator light, Air temperature and humidity sensor, and Soil moisture sensor.
- Battery Cover: Protects the battery compartment.
- Reset Key: Used for pairing and resetting the device.
- Indicator Light: Provides status feedback (e.g., pairing mode).
- Air Temperature and Humidity Sensor: Measures ambient conditions.
- Soil Moisture Sensor: The probe inserted into the soil to detect moisture levels.
2. Setup
2.1 Package Contents
Please check the package for the following items:
- 1 x Tuya Zigbee Soil Moisture Sensor
- 1 x User Manual
2.2 Powering On (Battery Installation)
- Open the battery cover on the top of the sensor.
- Insert two LR03 (AAA) batteries into the compartment. Ensure correct polarity (+/-).
- Close the battery cover securely.
2.3 Installation Instructions
Description: A four-panel image illustrating the 'Before Using' steps: 1. Wiping the sensor clean with a cloth. 2. Correct insertion into soil (not too shallow, not in a pot without soil). 3. Checking for water absence on the sensor. 4. Waiting for 30 seconds to 1 minute after insertion for initial detection.
- Before inserting the sensor into the soil, ensure the surface of the soil moisture sensor probe is clean.
- Insert the sensor into the soil for no less than 2/3 of its length. Ensure that the sensing surface of the moisture sensor is in firm contact with the soil for accurate readings.
- If the soil is too dry, it is recommended to water the plant first and then insert the sensor.
2.4 Network Configuration (Pairing with Zigbee Gateway)
Note: This device must be connected to a Zigbee gateway to be used.
Description: A circular diagram showing the Zigbee Soil Moisture Sensor (Zigbee Device) connecting to a Zigbee Gateway, which then connects to a WiFi Router. The system allows for APP Remote Control and Voice Control (via Google Home). Arrows indicate data flow and control.
- Ensure your Zigbee gateway is powered on and connected to your home network.
- Open the Tuya Smart Life app on your smartphone and ensure your Zigbee gateway is added.
- Press and hold the