1. Introduction
Thank you for choosing the GGBEE Rechargeable Motion Sensor LED Night Light. This versatile 2-in-1 device functions as both a wall-mounted night light with motion sensing capabilities and a portable magnetic spotlight. It features adjustable color temperature, stepless dimming, and a long-lasting rechargeable battery, making it ideal for various indoor spaces such as bedrooms, corridors, stairs, and bathrooms.
Image: Product overview highlighting key features like flashlight mode, night light mode, human sensory switch, and magnetic adsorption.
2. Safety Information
- Do not disassemble, repair, or modify the product.
- Keep the device away from water and high humidity environments.
- Avoid exposing the device to direct sunlight or extreme temperatures.
- Use only the specified charging voltage (DC5V) to prevent damage.
- Keep out of reach of children.
- Do not look directly into the LED light source for extended periods.
3. Package Contents
Please check the package for the following items:
- 1 x GGBEE Rechargeable Motion Sensor LED Night Light Unit
- 1 x Magnetic Base
- 1 x Double-sided Adhesive Tape
- 1 x Type-C USB Charging Cable (not explicitly listed but inferred from Type-C port)
4. Specifications
| Feature | Specification |
|---|---|
| Product Name | Human body induction spotlight |
| Light Source | LED bulbs |
| Lamp Power | 0.6-2.5W (variable) / 1.1W (nominal) |
| Input Voltage | USB DC5V |
| Nominal Voltage | 5V |
| Power Source | Rechargeable 3.7V 1200mAh lithium battery |
| Body Material | ABS |
| Product Size | 45 x 45 x 136 mm |
| Luminous Flux | 60-249 LM |
| Motion Sensing Angle | 120 degrees |
| Motion Sensing Distance | 3-4 meters (10 feet) |
| Certifications | CE, ROHS |
| Use | Emergency, Night Light |
Image: Motion sensor capabilities with 120° sensing angle and 10ft (3-4m) sensing distance.
5. Setup and Installation
The GGBEE Night Light features an installation-free design with a strong magnetic base, allowing for easy placement and removal.
5.1 Wall Mounting
- Attach one side of the provided double-sided adhesive tape to the back of the magnetic base.
- Clean the desired installation surface thoroughly with a clean cloth to ensure proper adhesion.
- Attach the magnetic base to the cleaned surface.
- Place the night light unit onto the magnetic base. The light can be rotated to adjust the angle.
Image: Step-by-step diagram for wall mounting using the magnetic base and adhesive tape.
Image: The magnetic base allows for angular rotation and easy, drill-free installation.
6. Operating Modes and Controls
The night light features a main toggle switch and a back key switch for various functions.
6.1 Main Toggle Switch (ON-OFF-AUTO)
Image: Main toggle switch and Type-C charging port.
- ON: Steady ON mode. The light remains continuously on.
- OFF: The light is turned off.
- AUTO (Induction Mode): In this mode, the light will enter standby when the environment is bright. When the environment is dark, the induction light will automatically turn on and will turn off automatically 25 seconds after motion is no longer detected.
6.2 Back Key Switch (Color Temperature & Dimming)
Image: Controls for color temperature and stepless dimming.
- Short Press: Cycles through 3 color temperatures: 3000K (Warm Light), 4000K (Cool White), 6000K (White Light).
- Long Press: Activates stepless dimming, allowing you to adjust brightness from 1LM to 100LM.
6.3 Spotlight / Night Light Switch
Image: Switch for selecting spotlight, night light, or both.
- I: Spot light only.
- II: Spot light + Night lights (both on).
- III: Night light only.
7. Charging the Device
The night light has a built-in polymer lithium battery. To charge:
- Connect the provided Type-C USB charging cable to the charging port on the device.
- Connect the other end of the cable to a DC5V USB power adapter (not included).
- The indicator light will glow red during charging and turn green when fully charged.
Image: Charging and estimated usage times for different modes.
Estimated Usage Times:
- Full Charge Time: Approximately 1 hour
- Night Light Mode: Up to 7 hours
- Flashlight Mode: Up to 2.5 hours
- Night Light + Flashlight Mode: Up to 2 hours
8. Maintenance
- Clean the device regularly with a soft, dry cloth.
- Do not use abrasive cleaners or solvents.
- Ensure the charging port is free from dust and debris.
- Store the device in a cool, dry place when not in use for extended periods.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on in AUTO mode. | Environment is too bright, or battery is low. | Ensure the environment is dark enough. Charge the device fully. |
| Motion sensor is not detecting movement. | Obstruction in sensor's path, or device placed too high/low. | Clear any obstructions. Adjust placement to ensure sensor has a clear view of the detection area. |
| Light does not charge. | Faulty cable or power adapter. | Try a different Type-C cable and USB power adapter. |
| Brightness or color temperature cannot be adjusted. | Incorrect button press or device malfunction. | Ensure you are using short press for color and long press for dimming on the back key switch. If issue persists, contact support. |
10. User Tips
- For optimal motion sensing, place the light at a height where the sensor can easily detect movement in the desired area, typically between 1.5 to 2 meters from the floor.
- Experiment with the 3 color temperatures (Warm, Cool White, White) to find the most comfortable lighting for different times of day or specific moods.
- Utilize the stepless dimming feature to conserve battery life or to provide a very subtle night light for sleeping.
- The magnetic base allows for easy removal, making it convenient to use the light as a portable flashlight when needed.
11. Warranty and Support
For detailed warranty information and customer support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download and further reference:
If you encounter any issues not covered in this manual, please contact the seller or manufacturer's customer service for assistance.