RUNTOIN DL-25001-5A

Contents

User Manual: RUNTOIN 24W LED Desk Lamp

Model: DL-25001-5A

Brand: RUNTOIN

1. Introduction

Thank you for choosing the RUNTOIN 24W LED Desk Lamp. This lamp is designed to provide optimal lighting for various tasks, featuring eye-caring technology, flexible positioning, and convenient control options. Please read this manual thoroughly before use to ensure proper installation and operation.

RUNTOIN 24W LED Desk Lamp illuminating a dual monitor setup.

Image: The RUNTOIN 24W LED Desk Lamp providing illumination for a dual monitor workstation.

2. Safety Warnings and Precautions

  • Remote Control Range: The infrared remote control transmitter needs to be aligned with the infrared receiving head position. The effective range is within a 3-meter radius from the receiving head.
  • Water Resistance: This product is not waterproof. Do not use it in humid environments to prevent damage.
  • Heat Sources: Do not install this product near heat sources such as air conditioner outlets, heating outlets, humidifiers, or areas with drastic temperature changes. The recommended working temperature is -10°C to 40°C.
  • Disassembly: Do not attempt to disassemble this product yourself to avoid damaging internal components.
  • Induction Area: Ensure the induction area on the surface of the product is not covered by other objects.
  • Cleaning: Use a clean and soft cloth to wipe the surface. Do not use corrosive solvents for cleaning.

3. Package Contents

Please check the package for the following items:

  • Lamp head × 1
  • Gooseneck × 1
  • Support rod × 1
  • Clamp base × 1
  • Adapter × 1
  • Remote control × 1
  • User Manual × 1

4. Specifications

FeatureSpecification
Model NumberDL-25001-5A
Input Voltage100-240V 50/60HZ
Output Voltage24V 1A
Input PowerMax 24W
Luminous Flux2000-82000 LM
Color Temperature2700K-6500K (10 levels)
Brightness AdjustmentStepless, 5%-100% (10 levels)
Remote Control Sensing Distance≤3 meters
MaterialAluminum + ABS + PC
Input PortDC5.5*2.1
Working Humidity0%~85% RH
Working Temperature-10°C~40°C
Linear Light Bar Length785mm / 30.9in
Lamp Body Diameter30mm / 1.81in
Max Height (from desk)71cm / 28in
Min Height (from desk)46cm / 18in
Clamp Base Working HeightMax 7.2cm / 2.8in, Min 1.3cm / 0.5in
Diagram illustrating the flexible gooseneck and rotating light strip, along with clamp base dimensions.

Image: Product dimensions and flexibility features, including gooseneck rotation, lamp head rotation, and clamp base working height.

5. Installation Instructions

Follow these steps to assemble and install your desk lamp:

  1. Fix the Clamp: Securely fix the clamp base onto your desktop. Ensure the desktop thickness is within the working height range of the clamp (Max 7.2cm/2.8in, Min 1.3cm/0.5in).
    Step 1: Fixing the clamp on the desktop.

    Image: Securely attaching the clamp base to the edge of a desk.

  2. Assemble Lamp Column: Align the lamp column with the base and insert it. Tighten and secure the hand screws to fix it in place.
    Step 2: Aligning the lamp column and inserting it into the base.

    Image: Inserting the main lamp column into the clamp base and securing it.

  3. Connect Support Rod: Insert the raised part of the gooseneck tube into the round hole of the support rod, ensuring proper alignment, and fix it.
    Step 3: Inserting the raised part of the tube into the support rod.

    Image: Connecting the flexible gooseneck section to the main support rod.

  4. Attach Lamp Head: Insert the raised part of the lamp head into the round hole of the gooseneck tube, ensuring proper alignment, and fix it.
    Step 4: Inserting the raised part of the lamp head into the tube.

    Image: Attaching the linear light bar (lamp head) to the flexible gooseneck.

Video: A demonstration of the desk lamp's assembly process, flexible adjustments, and various lighting modes.

6. Operating Instructions

6.1. Touch Control

Image of the lamp's control panel with touch buttons.

Image: Close-up of the lamp's touch control panel.

  1. Power ON/OFF: Short press the power button (Power icon) to turn the light on or off.
  2. Color Temperature Adjustment: When the light is on, short press the color temperature button (Color temperature icon) to switch between 5 levels of color temperature. Long press to cycle through these 5 modes.
  3. Brightness Adjustment: When the light is on, it defaults to the highest brightness. Short press the brightness decrease button (Brightness decrease icon) to decrease brightness by one of 10 levels (100%-5%). If minimum brightness is reached, a short press will cycle back to maximum brightness. Long press to adjust brightness steplessly.

6.2. IR Remote Control

Diagram showing 10 brightness levels and 10 color temperatures.

Image: Visual representation of the 10 brightness levels and 10 color temperatures available.

  1. Power ON/OFF: Short press the power button (Power icon) to turn the light on or off.
  2. Color Temperature Adjustment:
    • Short press the color temperature increase button (Color temperature increase icon) to increase color temperature by one level (10 levels total, from 2700K to 6500K). Long press for stepless adjustment.
    • Short press the color temperature decrease button (Color temperature decrease icon) to decrease color temperature by one level. Long press for stepless adjustment.
  3. Brightness Adjustment:
    • Short press the brightness increase button (Brightness increase icon) to increase brightness by one level (10 levels total, 5%-100%). Long press for stepless adjustment.
    • Short press the brightness decrease button (Brightness decrease icon) to decrease brightness by one level. Long press for stepless adjustment.
  4. Night Mode: Short press the night mode button (Night mode icon) to activate night mode.
  5. Timer Mode: Short press the timer button (Timer icon) to activate a 60-minute timer, after which the light will turn off. Short press again to deactivate the timer.

Note: The infrared remote control transmitter must be aligned with the infrared receiver on the lamp for proper function.

6.3. Memory Function

In the event of uninterrupted power, the lamp will retain the last set color temperature and brightness settings when turned on again. This applies to both infrared remote control and physical button adjustments.

7. Maintenance

  • To clean the lamp, use a clean and soft cloth to wipe its surface.
  • Do not use corrosive solvents or harsh chemicals, as these may damage the lamp's finish or internal components.
  • Ensure the lamp is unplugged before cleaning.

8. Troubleshooting

Q: Why doesn't the lamp turn on after assembly?
A: Please ensure that all components are securely connected and check whether the power source is functioning properly.
Q: The lamp flickers during use. How can this be resolved?
A: Flickering may be caused by an unstable power connection or an incompatible power source. Ensure that the lamp is connected to a stable power outlet and that all connections are secure.
Q: The remote control is not working. What should I do?
A: First, check whether the remote control's battery is installed correctly and has sufficient power. Also, ensure that there are no obstacles between the remote and the lamp.
Q: The touch control on the lamp is slow to respond or not working. Any suggestions?
A: Ensure that the touch control area is clean and dry. If the issue persists, try unplugging the lamp, waiting a few minutes, and reconnecting it.

If the issue persists, contact customer support for further assistance.

9. User Tips

  • For optimal eye comfort, experiment with different color temperatures and brightness levels to find what works best for your environment and task.
  • Utilize the flexible gooseneck and rotating lamp head to direct light precisely where needed, minimizing glare on screens and maximizing illumination on your workspace.
  • The memory function is convenient; ensure the lamp remains powered to retain your preferred settings.
  • While no specific user tips were found from reviews or Q&A, general best practices for desk lamps include positioning the light to avoid shadows and adjusting it to reduce eye strain during prolonged use.

10. Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact our after-sales service team via email:

A PDF version of this user manual is available for download. Please refer to the product page for the direct link to the PDF document.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.