Introduction
This manual provides detailed instructions for setting up, operating, and troubleshooting your FENVI AC1200 Dual Band Gigabit WiFi Router. This high-performance router offers 1200Mbps wireless speed across 2.4GHz and 5GHz bands, supporting advanced features like MU-MIMO, Beamforming, IPv6, and multiple operating modes for a robust home network experience.
Safety Information
- Ensure the router is placed in a well-ventilated area to prevent overheating.
- Use only the provided power adapter.
- Keep the device away from water, fire, and high temperatures.
- Do not attempt to open or repair the device yourself.
- Avoid placing the router near strong electromagnetic interference sources.
Package Contents
Verify that your package contains the following items:
- WiFi router x 1
- Power adapter x 1
- Ethernet cable x 1
- Quick installation guide x 1
Setup Guide
Step 1: Connect Your Devices
- Power off your modem, and remove its battery (if any).
- Connect the WAN port of the router to a LAN port of your modem or to an Ethernet jack.
- Reinstall your modem's battery, and power on your modem.
- Use the included power adapter to connect the router to a power source. The LED indicator lights solid on.
- Connect your devices to the router:
- Wireless devices: Connect wireless devices to the WiFi network of the router using the default WiFi name specified on the bottom label of the router.
- Wired devices: Connect wired devices to port LAN1, 2, 3 of the router.
- WPS: Press the WPS button on the router, and enable the WPS function of another device within 2 minutes to establish a WPS connection.
Step 2: Initial Configuration via Web Interface
- Start a web browser on a device connected to the router. Enter
192.168.100.1in the address bar, and press Enter. - Customize your WiFi Name (SSID) and WiFi Password, then click Next.
- Set your internet connection type. PPPoE is commonly used; enter the User Name and Password provided by your Internet Service Provider (ISP).
Step 3: Access the Internet
- Wireless devices: Connect your wireless devices to the WiFi network of the router using the WiFi name and password you set during initial configuration. The 5 GHz WiFi name will typically have a "_5G" suffix.
- Wired devices: Your wired devices connected to the router's LAN ports can access the internet directly.
Operating Modes
The AC1200 router supports multiple operating modes to suit various network needs:
- Router/AP Mode: Ideal for transforming your wired network into a wireless network. In this mode, the router connects to your modem and broadcasts a Wi-Fi signal.
- Repeater Mode: Perfect for extending the range of your existing WiFi signal. The router bridges the WiFi signal from your main router to cover dead zones.
Specifications
| Feature | Description |
|---|---|
| Model Name | AC1200 WiFi Router (WR1200S) |
| Frequency Band Class | Dual-Band (2.4GHz & 5GHz) |
| Wireless Communication Standard | 802.11ac (Wi-Fi 5) |
| Wireless Transmission Rate | 1200Mbps (300Mbps for 2.4G, 867Mbps for 5G) |
| Wired Transfer Rate | 10/100/1000Mbps (Gigabit) |
| WAN Ports | 1 x 10/100/1000Mbps RJ45 Ethernet WAN port |
| LAN Ports | 3 x 10/100/1000Mbps RJ45 Ethernet LAN ports |
| Antennas | 4 x 5dBi external antennas |
| Function | Firewall, MU-MIMO, Beamforming, IPv6, Standalone PA+LNA |
| With Modem Function | No |
| Supports WDS | No |
| Certification | CE |
| Power Adapter | DC12V/1A |
| Wireless Encryption | WPA-PSK, WPA2-PSK |
| Dimensions (L x W x H) | 189.6mm x 110mm x 182mm (including antennas) |
Maintenance
- Cleaning: Use a soft, dry cloth to clean the router. Do not use liquid or aerosol cleaners.
- Firmware Updates: Periodically check the manufacturer's website for firmware updates to ensure optimal performance and security.
- Placement: Ensure the router is placed in an open area, away from walls and other electronic devices that might cause interference.
- Heat Dissipation: Do not block the ventilation holes on the router to ensure proper airflow and prevent overheating.
Troubleshooting
- Q1: What should I do if I cannot access the web management page?
-
- Reboot your router and try again.
- If the computer is set to a static IP address, change its settings to obtain an IP address automatically.
- Verify that
http://192.168.100.1is correctly entered in the web browser, and press Enter. - Use another web browser and try again.
- Disable and enable the network adapter being used.
- Q2: What should I do if I cannot access the internet?
-
- Power off your modem for about 5 minutes, then power it on and check the internet. If your modem has more than one Ethernet port, keep other ports unconnected.
- Check if the internet is working normally by connecting a computer directly to the modem via an Ethernet cable. If it is not, contact your internet service provider.
- Log in to the web management page, and go to the Network Map page to check whether the internet IP address is valid or not. If it's valid, go to Network > Ethernet, modify DNS Type, select Manual, and use the following DNS addresses: primary DNS to 8.8.8.8, and secondary DNS to 8.8.4.4. If it is not, check the hardware connection or contact your internet service Provider.
- Q3: How do I restore the router to its factory default settings?
-
- With the router powered on, use a pin to press and hold the RESET button on the back until the Power LED blinks.
- Log in to the web management page of the router, go to Management > Restart & Reset > Reset, and click Restore factory Settings. The router will restore and reboot automatically.
- Q4: What should I do if I forget my wireless network password?
-
- If you have not changed the default wireless password, it can be found on the label at the bottom of the router.
- Connect a computer directly to the router using an Ethernet cable. Log in to the router's web management page at
http://192.168.1.110, and go to Wireless > WiFi > WiFi Settings to retrieve or reset your wireless password.
- Q5: Why cannot my phone find the 5GHz signal?
-
Only devices supporting 5GHz signal can find and connect to the 5GHz wireless network.
User Tips
- For optimal performance, ensure your devices support 5GHz Wi-Fi to take advantage of the faster 867Mbps band.
- Regularly check for firmware updates to ensure security and performance improvements.
- If experiencing slow speeds, try repositioning the router to a central location, away from obstructions and other electronic devices.
- The router's default WiFi name and password are on the bottom label. It is recommended to change these during initial setup for security.
- Utilize the Gigabit LAN ports for devices requiring stable and high-speed wired connections, such as gaming consoles or desktop PCs.
Warranty and Support
For detailed warranty information and technical support, please refer to the official FENVI website or the comprehensive user manual PDF available at this link. This PDF contains additional diagrams and in-depth instructions.
For further assistance, contact your retailer or the manufacturer's customer service.