IRALAN YH4

Contents

IRALAN YH4 White RGB Dimmable LED Ceiling Light User Manual

Model: YH4

Important Safety Instructions

WARNING: General Safety Instructions

  • Assemble the light on a hard and level surface to avoid damage.
  • To avoid electric shock, the power must be turned off during the whole assembly or future cleaning.
  • Please assemble this light at least by two people.

Package Contents

Please check that all components are present and undamaged before assembly.

  • 1 x Ceiling Light Fixture
  • 1 x Remote Control

Accessories:

Item Quantity
Nuts (for petals) 11 pcs
Short threaded tubes 2 pcs
Flat-headed screws 2 pcs
Nuts (for hanger) 2 pcs
Sharp point screws 11 pcs
Wrench 1 pcs

Assembly Instructions

Ensure power is OFF at the main circuit breaker before beginning installation.

  1. Open the Box and Take Out Components: Carefully open the packaging and remove all parts. Place them on a clean, flat surface.

    Components laid out from the box

    Image: All components removed from packaging and ready for assembly.

  2. Place Components on a Clean Table: Arrange all components on a clean and flat table for easy access during assembly.

    Components arranged on a table

    Image: Ceiling light components neatly arranged on a table.

  3. Assemble Petals: Assemble the short threaded end of each tube to the petals. Ensure a secure fit.

  4. Attach Petals to the Plate: Assemble the petals to the main plate, paying close attention to their designated positions and orientation.

  5. Fasten Petals: Securely fasten the petals to the plate using the provided nuts.

  6. Tighten Nuts: Use the provided wrench to tighten all nuts, ensuring the petals are firmly attached.

  7. Connect Wires: Connect the wires from each petal to the central collector unit. Ensure proper electrical connections.

  8. Prepare Hanger: Assemble the flat-headed screws to the hanger with nuts in place, but do not fully tighten them yet.

  9. Position Hanger: Place the hanger over the light's plate, ensuring the screws pass through the designated holes. Then, fasten the nuts to lock the screws' positions.

  10. Install Hanger to Ceiling: Install the hanger to the ceiling using the sharp point screws. Ensure it is securely mounted to a joist or appropriate ceiling support.

  11. Mount Light Fixture: Lift the assembled light fixture and install it onto the ceiling hanger. Guide the four flat-headed screws through the plate and fasten them with the remaining nuts as shown in the diagram.

Operation

Remote Pairing

  1. Insert batteries into the remote control.
  2. Turn on the light using the wall switch. Immediately press the "ON 1 OFF" button on the remote. The light will flash three times to indicate successful pairing.
Remote control and wall switch

Image: Remote control and wall switch for light operation.

App Pairing

  1. Scan the QR Code (usually found in the product packaging or a separate manual insert) to download and install the control app on your mobile phone.
  2. Turn on the light. Open the app, search for the light, and pair it following the on-screen instructions.
  3. Set a scene for the light within the app, such as for a living room or bedroom. Follow any additional tips in the app to complete the pairing process.
Mobile app control interface

Image: Mobile application interface for controlling the light.

Lighting Modes and Features

The light offers various modes and adjustable settings:

  • Color Cycle Modes: Experience dynamic color changes with Color Cycle Mode 1, Mode 2, and Mode 3.
  • Progress Fill Mode: Watch as colors gradually fill the light fixture.
  • Single Color Mode: Select and display a single static color.
  • Petal Working Mode: Adjust the brightness of the main petal lights.
  • Dual Light Operation: The light can operate with both the main white/warm/neutral light and the RGB backlight simultaneously.
  • Adjustable Brightness: Dim or brighten the light to your preference.
  • Color Temperature Adjustment: Switch between White light, Warm light, and Neutral light.

Video: Demonstration of various color cycle modes, single color modes, and brightness adjustments.

Features

  • Exquisite Workmanship: Crafted with high-quality acrylic plate, ensuring stable quality and resistance to deformation.
  • Stepless Dimming: Adjust brightness seamlessly to create the perfect ambiance.
  • Energy-Saving LED: Utilizes an LED light source that is clear, non-dazzling, and flicker-free, providing eye protection.
  • Backlight Effect: Features a backlight that enhances the atmosphere and adds elegance to your space.
  • Multiple Control Options: Supports control via wall switches, remote control, and a mobile phone app for ultimate convenience.
CRI 80+ and Eye Protection

Image: Illustrates high Color Rendering Index (CRI 80+) for vivid and natural light, along with eye protection and no flicker.

Integrated LED Chips Benefits

Image: Highlights benefits of integrated LED chips including longer lifetime, higher brightness, eye protection, no radiation, more secure operation, energy saving, and low light decay.

Specifications

Attribute Value
Brand Name IRALAN
Model Number YH4
Voltage 90 - 260 V
Power 95W
Luminous Flux 2000-82000
Light Source LED bulbs
Is Dimmable Yes (Stepless Dimming)
Is Smart Device Yes (App Control)
Installation Method Assembly, Surface mounted
Body Material Ironware + Acrylic
Lighting Area 5-10 square meters
Application Kitchen, Dining Room, Bed Room, Foyer, Study, Exhibition Hall, Corridor, Balcony
Switch Type Remote Control
Number of light sources > 20
Item Type Ceiling lights
Style Modern Style
Color WHITE
Finish None
Technics Forged
Use Daily Lighting
Certification CCC, CE
Origin Mainland China

Maintenance

  • Cleaning: Ensure the power is off before cleaning. Use a soft, dry cloth to wipe the fixture. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying. Avoid abrasive cleaners or solvents.
  • Bulb Replacement: This fixture uses integrated LED bulbs, which are not user-replaceable. If the LEDs fail, professional service may be required.
  • Regular Checks: Periodically check all connections and mounting hardware to ensure they remain secure.

Troubleshooting

Problem Possible Cause Solution
Light does not turn on No power; Loose wiring; Remote/App not paired. Check circuit breaker. Ensure all wires are securely connected. Re-pair remote or app.
Remote control not working Dead batteries; Not paired; Obstruction. Replace batteries. Re-pair the remote. Ensure no objects block the signal.
App control not working Not paired; Wi-Fi issue; App malfunction. Re-pair the light with the app. Check Wi-Fi connection. Restart the app or phone.
Light flickers or dims unexpectedly Unstable power supply; Loose connection; Faulty component. Check power supply stability. Verify all wiring connections. If problem persists, contact support.

User Tips

  • For optimal ambiance, experiment with the different color cycle modes and brightness levels to match your mood or activity.
  • Utilize the mobile app for convenient control and to set up custom scenes or schedules for your lighting.
  • Consider the 'Neutral light' setting for tasks requiring clear visibility, and 'Warm light' for a cozy atmosphere.

Warranty and Support

This IRALAN YH4 LED Ceiling Light comes with a 2-year warranty from the date of purchase.

For detailed item guides and documents, including further technical specifications or troubleshooting, please refer to the official user manual PDF. You can typically find this on the product's support page or by scanning the QR code provided with your purchase.

If you encounter any issues or have questions not covered in this manual, please do not hesitate to contact customer support. We serve with care and efficiency.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.