1. Introduction
The HILDA Socket Tester (Model AB569) is a compact and easy-to-use electrical safety tool designed to quickly diagnose common wiring problems in electrical sockets. It provides real-time voltage readings and indicates the status of your socket's wiring, ensuring the safety and reliability of your electrical system. This device is suitable for home inspections, office use, and professional electrician work.

The HILDA Socket Tester, designed for easy plug-and-test operation without the need for an electrician.
2. Package Contents
- 1 x HILDA Socket Tester (Model AB569)
- 1 x English Instruction Manual
3. Safety Information
WARNING: Please read this instruction manual carefully before use to ensure safe and proper operation. Do not attempt to repair or modify the device yourself.
- Ensure the plug type of the tester matches your socket type (EU Plug).
- Do not use the device if it appears damaged.
- Keep out of reach of children.
- If the tester indicates a fault, consult a qualified electrician.
4. Setup
The HILDA Socket Tester is designed for immediate use. No assembly or batteries are required.
- Ensure the socket you intend to test is live and safe to approach.
- Carefully insert the HILDA Socket Tester into the electrical socket.
- The device will power on automatically and display the current voltage and wiring status via its LED indicators.
5. Operating Instructions
5.1. Reading Wiring Status Indicators
The tester features a series of LED indicators (N, PE, L) and a digital display to show the socket's wiring status. Refer to the table below for interpretation:

Visual comparison of correct wiring and phase zero inversion, highlighting key features like voltage measurement and polarity detection.
| Indicator State | Description | Action |
|---|---|---|
| CORRECT | The socket circuit is normal, safe, and reliable for power use. (N not lit, PN and L red lights on) | No action required. |
| OPEN GROUND | Missing ground wire. | Consult a qualified electrician. |
| OPEN NEUTRAL | Missing neutral line. | Consult a qualified electrician. |
| LIVE/NEU REV | Live and Neutral wires are reversed (Phase Zero Inversion). This can cause appliances to age rapidly and endanger personal safety. | Consult a qualified electrician immediately. |
| LIVE/GRD REV | Live and Ground wires are reversed (Phase-to-ground inversion). | Consult a qualified electrician immediately. |
| LIVE/GRD MISSING GRD | Live-Ground error and missing ground. | Consult a qualified electrician immediately. |
Detailed table of wiring states and their corresponding LED patterns.

Visual representation of various incorrect wiring conditions detected by the socket tester.
5.2. Leakage Protection Test
The HILDA Socket Tester includes a leakage protection test function to verify the integrity of your circuit's residual current device (RCD) or ground fault circuit interrupter (GFCI).
- With the tester plugged into the socket and displaying a "CORRECT" wiring status, press the "LEAKAGE TEST" button.
- If the circuit breaker (RCD/GFCI) trips, the leakage protection is functioning normally.
- If the circuit breaker does not trip, the leakage protection is faulty. In this case, contact professional personnel to repair the circuit.

Performing the leakage protection test by pressing the dedicated button on the socket tester.

Illustrates the outcome of a leakage test: normal tripping versus no tripping (faulty protection).
5.3. Voltage Measurement
The clear LCD display screen shows real-time voltage readings, allowing you to monitor the voltage of the tested socket.
6. Maintenance
- Keep the device clean and dry. Wipe with a soft, dry cloth if necessary.
- Do not use abrasive cleaners or solvents.
- Store in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
- Device does not power on: Ensure it is fully inserted into a live socket. If the socket is known to be live and the device still doesn't power on, the device may be faulty.
- Inconsistent readings: Ensure the tester is firmly seated in the socket. Test in another known good socket to verify device functionality.
- Leakage test does not trip: This indicates a fault in your circuit's leakage protection. Consult a qualified electrician immediately.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | HILDA |
| Model | AB569 |
| Plug Type | EU Plug |
| Input Voltage | <50VAC/75VDC |
| Operating Voltage | 250V |
| Frequency | 50Hz/60Hz |
| Leakage Trip Current | IΔn30mA |
| Display | LCD Digital Display, LED Indicators |
| Dimensions (L x W x H) | 14 cm x 11 cm x 7 cm (Approximate package dimensions) |
| Weight | 0.072 kg (Approximate package weight) |

The compact design of the HILDA Socket Tester makes it small and easy to carry.
9. User Tips
- Always ensure the plug type of your tester (EU Plug) matches the sockets you intend to test.
- For maximum safety, perform the leakage protection test periodically on your circuits.
- If any fault is detected, always consult a certified electrician for diagnosis and repair.
10. Warranty and Support
For warranty information or technical support, please refer to the seller's terms of service or contact the point of purchase. Keep your proof of purchase for any warranty claims.
