1. Introduction
The YEELIGHT Plug-in Mini Night Light (Model YLYYD-0025) is a versatile device designed to provide soft, warm white illumination while also serving as a USB charging adapter. It features a light-sensing mode for automatic operation and a manual on/off mode, all within a compact, energy-efficient design.
Figure 1: Yeelight Plug-in Mini Night Light overview.
2. Safety Information
- Ensure the product is used with a power supply within the rated input range (220-240V~50/60Hz).
- Do not disassemble or modify the device.
- Keep away from water and high humidity environments.
- Do not cover the light sensor or the illuminating area during operation.
- This product is designed for indoor use only.
- Unplug the device from the power outlet before cleaning.
3. Product Overview
The night light features a simple, functional design. Refer to the diagram below for key components:
Figure 2: Product components.
- Illuminating Area: Emits warm white light.
- ON/OFF Button: For manual control of the light.
- Type-C Port: USB output for charging devices (5VDC, 3A).
- Power Plug: EU standard plug for 220-240V outlets.
4. Setup
To set up your YEELIGHT Plug-in Mini Night Light:
- Unpack the night light from its packaging.
- Plug the night light directly into a standard EU wall socket (220-240V).
- Ensure the light sensor is not obstructed for optimal performance in light-sensing mode.
Note: This product is suitable for 220V-240V voltage. Please verify your local voltage before use.
5. Operating Modes
The night light offers two primary operating modes:
Figure 3: Two Lighting Modes.
5.1. Light Sensing Mode
- Upon plugging in, the night light activates its light sensor mode after approximately 3 seconds.
- Auto-on at Dusk: The night light will illuminate automatically when the ambient light level is less than 2 lux (±1 lux).
- Auto-off at Dawn: The night light will automatically turn off when the ambient light level exceeds 13 lux (±3 lux).
- To ensure proper sensor function, it is recommended to use the night light without any interference blocking the sensor.
5.2. Always-On/Off Mode
- When the night light is on (either manually or via light sensing mode), a short tap on the ON/OFF button will turn the night light off.
- If the night light was turned off manually, the light sensing mode will be reactivated the next time the ambient lighting changes (e.g., it gets dark again).
5.3. USB Charging Function
- The integrated USB Type-C port provides 5VDC, 3A output for charging various devices.
- This feature allows you to charge your smartphone, tablet, or other USB-powered gadgets while the night light is plugged in.
- The charger offers a 15W universal output rate, ensuring fast and efficient charging.
Figure 4: USB Charging Capability.
6. Maintenance
- Cleaning: Disconnect the night light from the power outlet before cleaning. Use a soft, dry cloth to wipe the surface. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, unplug the device and store it in a cool, dry place.
- General Care: Avoid dropping the device or exposing it to strong impacts.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Night light does not turn on. | No power, faulty outlet, or light sensor is covered. | Check power outlet. Ensure the light sensor is clear. Tap the ON/OFF button. |
| Light sensing mode not working correctly. | Sensor obstructed or ambient light conditions are inconsistent. | Ensure the sensor is not covered. Avoid placing the light near fluctuating light sources. |
| USB charging not working. | Cable issue, device not compatible, or night light not receiving power. | Try a different USB cable. Ensure the night light is plugged in and functional. Check device compatibility. |
8. Specifications
Figure 5: Product Specifications.
| Parameter | Value |
|---|---|
| Model No. | YLYYD-0025 |
| Rated Input | 220-240V~50/60Hz 0.2A |
| USB Output | 5VDC, 3A (15W) |
| LED Output | 0.25W |
| Luminous Flux | 2 lm |
| Color Temperature | 2700K (Warm White) |
| Ingress Protection | IP20 |
| Sensor Type | Light Sensor |
| Dimensions | 61mm (Diameter) |
| Power Source | AC |
| Wireless Communication | Non-Remote Function |
| Battery Included | No |
9. User Tips
- For optimal light sensing, avoid placing the night light in areas with direct sunlight or strong artificial light during the day, or in completely dark corners where ambient light changes are minimal.
- The compact design allows it to be plugged into a dual outlet without blocking the second socket, maximizing outlet utility.
- The soft, 2700K warm white light is designed to be easy on the eyes, with no harmful bluelight, making it ideal for bedrooms and nurseries.
- The low power consumption (0.25W) means it uses very little electricity, approximately 1 kWh per year, contributing to energy savings.
10. Warranty and Support
For warranty information and customer support, please refer to the official Yeelight website or contact your retailer. Keep your purchase receipt as proof of purchase.
A user manual in PDF format is available for download: View User Manual (PDF)