Road Top NTG5.0 Wireless CarPlay Decoder Box

Contents

Road Top Wireless CarPlay Decoder Box User Manual

Model: NTG5.0 Wireless CarPlay Decoder Box

1. Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your Road Top Wireless CarPlay Decoder Box. This device integrates Wireless CarPlay, Android Auto, AirPlay, and Autolink functionalities into your Mercedes Benz vehicle's original NTG5.0/5.1/5.2 system.

Key Features:

  • Wireless/Wired CarPlay
  • Wireless/Wired Android Auto
  • AirPlay Mirror Link
  • Autolink
  • Support for aftermarket rear view cameras and front view cameras
  • USB media playback (music, video)
  • EQ adjustable for audio quality
  • Utilizes original car wire plug-and-play for non-destructive installation
  • Supports original car knob and steering wheel controls
  • Siri and Google Assistant voice control

2. Compatibility

This Wireless CarPlay Decoder Box is compatible with Mercedes Benz vehicles equipped with the NTG5.0/5.1/5.2 system, manufactured between 2015 and 2018. Please verify your car's model, system, and screen size before installation.

2.1 Compatible Models and Years

Model System Year
C-Class (W205) NTG5.0/5.1/5.2 2015-2018
GLC-Class NTG5.0/5.1/5.2 2015-2018
GLA-Class (X156) NTG5.0/5.1/5.2 2015-2018
CLA-Class (C117) NTG5.0/5.1/5.2 2015-2018
A-Class (W176) NTG5.0/5.1/5.2 2016-2018
B-Class (W246) NTG5.0/5.1/5.2 2016-2018
S-Class (W222) NTG5.0/5.1/5.2 2015-2018
V-Class (W447) NTG5.0/5.1/5.2 2015-2018

Note: The operation method may differ slightly due to different car models. Please consult customer service if you are unsure about your specific model.

Compatible Model List for Mercedes Benz C-Class and GLC
Figure 2.1: Compatible Model List for Mercedes Benz C-Class and GLC.
Diagram showing compatible and incompatible Mercedes Benz radio units based on NTG version and screen type
Figure 2.2: Visual guide to identify compatible NTG 5.0 radio units (flat button, small card slot) versus incompatible NTG 4.5, 4.7, and 4.0 units.

3. Package Contents

Please check the package for the following items:

  • CarPlay Decoder Box
  • Power Cable Harness
  • LVDS Cable
  • USB-AV Cable
  • Wi-Fi Antenna
  • USB Adapter or Bluetooth Transmitter (Note: Random package)
Image showing all accessories included: Power cable, LVDS cable, USB-AV cable, Wi-Fi antenna, USB adapter or Bluetooth transmitter, and the CarPlay decoder box.
Figure 3.1: Product Accessories List.
Image showing the NTG 5.0 System Accessories: Power cable, LVDS cable, USB-AV cable, Wi-Fi antenna, USB adapter or Bluetooth transmitter.
Figure 3.2: NTG 5.0 System Accessories.

4. Setup and Installation

Installation involves removing parts of your car's dashboard and connecting the decoder box to the existing wiring. It is recommended to seek professional installation if you are not comfortable with car electronics.

4.1 Dashboard Removal

Dashboard removal procedures vary by car model. For detailed visual guidance, please scan the QR codes provided in the original user manual (Page 8) or search for specific YouTube videos for your Mercedes Benz model (C-Class W205 & GLC, S-Class W222, E-Class, A-Class CLA GLA, B-Class).

General Steps:

  1. Carefully identify and remove trim pieces around the head unit.
  2. Unscrew and detach the original head unit from the dashboard.
  3. Disconnect the necessary cables from the back of the head unit.

4.2 Toggle Switch (DIP) Setup

The toggle switches on the CarPlay decoder box must be set correctly according to your car model and screen size to ensure proper functionality and avoid display issues like black screens or half-screens.

Image showing the CarPlay decoder box with its toggle switches labeled 1-8.
Figure 4.1: Location of the toggle (DIP) switches on the decoder box.

Important: After changing the toggle switch settings, you must reconnect the CAN cable and restart the car engine for the changes to take effect.

4.2.1 Toggle Switch Settings by Car Model and Screen Size

Refer to the following tables for the correct DIP switch configurations. 'ON' indicates the switch is in the down position.

For C-Class W205, GLC & V-Class W447
Screen Size DIP Switch 1 DIP Switch 2 DIP Switch 3 DIP Switch 4 DIP Switch 5 DIP Switch 6 DIP Switch 7 DIP Switch 8
7 inch (800*480) OFF OFF OFF OFF OFF OFF ON OFF
8.4 inch (960*540) OFF OFF OFF OFF OFF OFF OFF ON
For S-Class W222
Screen Size DIP Switch 1 DIP Switch 2 DIP Switch 3 DIP Switch 4 DIP Switch 5 DIP Switch 6 DIP Switch 7 DIP Switch 8
12.3 inch OFF OFF OFF OFF OFF ON OFF OFF
For A-Class, B-Class, CLA, GLA, E-Class, G-Class, GLE & GLS (7-inch screen)

There are two dial setups for these models. If Dial Setup 1 does not work, try Dial Setup 2.

Dial Setup 1:

DIP Switch 1 DIP Switch 2 DIP Switch 3 DIP Switch 4 DIP Switch 5 DIP Switch 6 DIP Switch 7 DIP Switch 8
OFF OFF OFF OFF OFF ON OFF OFF

Dial Setup 2:

DIP Switch 1 DIP Switch 2 DIP Switch 3 DIP Switch 4 DIP Switch 5 DIP Switch 6 DIP Switch 7 DIP Switch 8
OFF OFF OFF OFF OFF OFF ON ON

4.3 Cable Connection

Follow the diagram and instructions carefully to connect all cables.

Diagram showing the overall cable connection chart for the CarPlay decoder box, connecting to the car's screen, head unit, and various accessories.
Figure 4.2: Overall Cable Connection Chart.

4.3.1 Power Cable Connection

  1. Unplug the original OEM power cable from the head unit.
  2. Connect the new power cable harness to the original OEM power cable.
  3. Plug the new power cable into the head unit.
  4. If your car has a fiber optic cable, move it from the original OEM power cable to the new power cable harness.
Diagram showing the power cable connection and the transfer of the fiber optic cable.
Figure 4.3: Power Cable and Fiber Optic Cable Connection.

4.3.2 LVDS Cable Connection

Connecting LVDS cables incorrectly will result in a black screen.

  1. Connect the new LVDS cable 1 to the "DISP" (LVDS) port of the OEM head unit.
  2. Connect the new LVDS cable 2 to the original LVDS cable.

The "DISP" port (also known as the LVDS port) is typically blue and located behind the head unit.

Diagram showing LVDS cable connections to OEM head unit and screen, highlighting the blue DISP port.
Figure 4.4: LVDS Cable Connection Diagram.

4.3.3 WiFi Antenna and USB-AV Cable Connection

Connect the WiFi antenna and USB-AV cable to their respective ports on the decoder box.

Note: To avoid losing the WiFi signal, ensure the antenna is not placed close to metal objects.

Image showing the WiFi antenna and USB-AV cable connected to the decoder box.
Figure 4.5: WiFi Antenna and USB-AV Cable Connection.

4.3.4 Bluetooth Transmitter Cable Connection

Connect the Bluetooth transmitter cable to the decoder box. After connection, the green light on the transmitter should be on, and the blue light should flash.

Image showing the Bluetooth transmitter connected to the decoder box, with indicator lights.
Figure 4.6: Bluetooth Transmitter Cable Connection.

4.4 CarPlay Box Placement

The CarPlay interface decoder box should be installed in an appropriate space near or on the OEM head unit, or within the glove box, ensuring it does not interfere with other car components.

5. Operation

5.1 System Switching

After all cables are connected, you can switch between the original Mercedes system and the CarPlay/Android Auto interfaces by long-pressing the "*" button on the car's center console handwriting mouse.

Image highlighting the 'star' button on the Mercedes Benz center console knob for system switching.
Figure 5.1: System Switch Button Location.
Screenshot of the CarPlay main menu showing icons for CarPlay, Android Auto, AirPlay, Autolink, USB, YouTube, Camera, and Music.
Figure 5.2: CarPlay Decoder Main Interface.

5.2 CarPlay/Android Auto Functions

The decoder box enables various smart functions:

  • Navigation & Maps: Supports mainstream navigation apps like Waze, Google Maps, Apple Maps, NAVER Map, T Map.
  • Mobile Music Play: Download music apps and link to the homescreen menu for popular music, rock, jazz, hip-hop.
  • Hands-Free Phone Call: Make and receive calls, return missed calls, and listen to voicemail.
  • Video Playback: Supports YouTube and other video sources.
Collage of screenshots demonstrating various system features: Dual System Interchange, HD Function support, YouTube video playback, Siri voice control, Mobile Music Play, and Precise Online Navigation.
Figure 5.3: Overview of System Features.
Image showing navigation and map features with voice command examples like 'Navigate to XX Station' and 'Go to a nearby gas station'.
Figure 5.4: Navigation & Maps Interface.
Image showing mobile music playback interface with voice command examples like 'Play popular music' and 'Play rock music'.
Figure 5.5: Mobile Music Play Interface.
Image showing a hands-free phone call interface on the car screen.
Figure 5.6: Hands Free Phone Call Interface.

5.3 Sound Setup

There are two primary methods for sound transmission to your car's audio system:

5.3.1 Bluetooth Transmission (via external transmitter)

  1. If your phone is already connected to your car's Bluetooth, disconnect it.
  2. In the CarPlay decoder box menu, go to "Setup" > "Audio output channel" and select "Transmitter BT".
  3. Pair the Bluetooth transmitter (e.g., "DC_AUDIO_BT-****") to your OEM Mercedes Bluetooth.
  4. Keep the original OEM Mercedes system on the Bluetooth audio page.
  5. Long-press the "*" button on the car console mouse to enter the CarPlay/Android Auto interface.

5.3.2 Phone Bluetooth Output (direct to car)

Note: This mode only supports CarPlay and Android Auto audio, as well as Bluetooth calls. USB/SD card music/video sound output and mirrored sound output are not supported.

  1. Disconnect the external Bluetooth transmitter (if connected).
  2. In the CarPlay decoder box menu, go to "Setup" > "Audio output channel" and select "Use Car's BT Channel".
  3. Pair your phone's Bluetooth directly to the OEM Mercedes Bluetooth.
  4. Keep the original OEM Mercedes system on the Bluetooth audio page.
  5. Long-press the "*" button on the car console mouse to enter the CarPlay/Android Auto interface.

5.4 Camera Functions

The decoder box supports original OEM reverse cameras, aftermarket reverse cameras, and front view cameras.

Diagram illustrating the camera function with parking radar and front view display when shifting gears.
Figure 5.7: Camera Functionality with Parking Radar and Front View.

5.4.1 Original OEM Camera Setup

Access the "Reverse" settings from the decoder main menu.

  • For Automatic Transmission: Set "Reverse Camera" to "Original". Ensure "Reverse line detect", "Reverse display track", and "Reverse display radar" are all set to "off".
  • For Manual Transmission: Set "Reverse Camera" to "Original". Set "Reverse line detect" to "on", and the others to "off". You will need to connect the "Back/Reverse detect" wire to your car's reverse lamp positive (+12V). This wire is not included in the package and needs to be sourced separately.

5.4.2 Aftermarket Reverse Camera Setup

Access the "Reverse" settings from the decoder main menu.

  • For Automatic Transmission: Set "Reverse Camera" to "Aftermarket". Ensure "Reverse line detect", "Reverse display track", and "Reverse display radar" are all set to "off".
  • For Manual Transmission: Set "Reverse Camera" to "Aftermarket". Set "Reverse line detect" to "on", and the others to "off". You will need to connect the "Back/Reverse detect" wire to your car's reverse lamp positive (+12V).

5.4.3 Front View Camera Setup

In the "Reverse" settings interface, adjust the "Front View Time" between 1 to 15 seconds. If no front view camera is installed, set this to 0 seconds.

Wiring diagram for front view camera connection.
Figure 5.8: Front View Camera Wiring Diagram.

5.5 Voice Control (Siri & Google Assistant)

You can activate Siri (for CarPlay) or Google Assistant (for Android Auto) using two methods:

  1. Use the Voice Control button on your steering wheel.
  2. Long-press the confirm button on the knob controller.
Image illustrating Siri and Google Voice Control activation methods using the steering wheel button and the center console knob.
Figure 5.9: Siri & Google Voice Control Activation.

5.6 Steering Wheel Control Buttons

The CarPlay interface decoder box supports the following original steering wheel control buttons:

  • Voice Control button
  • Telephone button
  • Volume "+" and "-" buttons

Other steering wheel buttons are not supported by the decoder box.

6. Maintenance

To ensure the longevity and optimal performance of your CarPlay Decoder Box, follow these general maintenance guidelines:

  • Keep the unit dry and clean. Avoid exposure to liquids or excessive moisture.
  • Do not expose the unit to extreme temperatures (very hot or very cold).
  • Avoid strong impacts or dropping the unit.
  • Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Ensure all cable connections remain secure. Periodically check for any loose connections.

7. Troubleshooting

If you encounter issues with your CarPlay Decoder Box, refer to the following common problems and solutions:

7.1 No Sound During CarPlay Function

Solution: You need to move the original fiber optic cable from the OEM power cable to the CarPlay source power cable. Refer to Section 4.3.1 (Power Cable Connection) and Figure 4.3 for detailed instructions.

7.2 Black Screen, Flash Screen, or Half-Screen

Cause: Incorrect toggle switch (DIP) setup.

Solution: Power off the engine, unplug the CAN power cable, adjust the toggle switches according to your car model and screen size (refer to Section 4.2), reconnect the CAN power cable, and then power on the engine. If Dial Setup 1 doesn't work for your model, try Dial Setup 2.

7.3 Poor WiFi Signal

Cause: The WiFi antenna may be placed too close to metal objects.

Solution: Ensure the WiFi antenna is positioned away from any metal components in the dashboard to optimize signal reception.

7.4 CarPlay/Android Auto Not Activating

Solution: Ensure you are long-pressing the "*" button on the car's center console handwriting mouse to switch to the CarPlay interface. Also, verify all cable connections are secure.

7.5 General Malfunction

Solution: Try restarting your car engine. If the problem persists, double-check all cable connections and toggle switch settings. If issues continue, contact customer support with details of your car model, year, screen size, and the software version of the CarPlay decoder box (found in Setup > System Version).

8. Specifications

Feature Specification
Operating System Linux
Voltage 12 V
Item Weight 1 kg
Material Plastic and metal
Compatible Display Sizes 7", 8.4", 12.3" (depending on car model)
Digital Media Format Support CD, DVD-R/RW, VIDEO CD, Mp3, MP4, WMA, JPEG
OSD Language Chinese (Simplified), Chinese (Traditional), German, Russian, French, Korean, Japanese, Italian, English
Special Features Support 3G/4G Network, Can-Bus, WiFi, Steering Wheel Control, Mobile Phone, MP3 players
Dimensions (Decoder Box) 148mm (L) x 94mm (W) x 23mm (H)
Diagram showing the interfaces and dimensions of the CarPlay decoder box.
Figure 8.1: Decoder Box Interfaces & Dimensions.

9. User Tips

  • Always power off your car's engine completely before making any changes to the toggle switch settings or cable connections to prevent damage.
  • If you experience any display issues (black screen, flashing, or half-screen), the first step is to re-check your toggle switch settings against the manual's compatibility tables.
  • For optimal sound quality, ensure your chosen audio output method (Bluetooth Transmitter or Phone Bluetooth Output) is correctly configured in the decoder box settings and paired with your car's OEM Bluetooth.
  • When using voice commands (Siri/Google Assistant), speak clearly and directly towards the car's microphone for best recognition.
  • If you have a manual transmission and are installing an aftermarket reverse camera, remember that the "Back/Reverse detect" wire needs to be connected to the car's reverse lamp positive (+12V) and is not included with the kit.

10. Frequently Asked Questions (FAQ)

Q: Why is there no sound during CarPlay function?

A: You need to move the original fiber optic cable from the OEM power cable to the CarPlay source power cable. Please refer to Section 4.3.1 for detailed instructions.

Q: Which steering wheel control buttons work with the decoder box?

A: The CarPlay interface decoder box supports the Voice Control button, the Telephone button, and the Volume "+" and "-" buttons. Other buttons are not supported.

Q: How do I activate Siri or Google Assistant?

A: You can activate Siri (for CarPlay) or Google Assistant (for Android Auto) by either using the Voice Control button on your steering wheel or by long-pressing the confirm button on the knob controller.

Q: What should I do if I see a black screen, flash screen, or half-screen?

A: These issues typically indicate an incorrect toggle switch (DIP) setup. Please refer to Section 4.2 for the correct settings for your car model and screen size. Remember to restart your car engine after making any changes.

11. Warranty and Support

The Road Top Wireless CarPlay Decoder Box comes with a 1-Year Warranty.

For technical support, troubleshooting assistance, or any questions regarding your product, please contact us via your purchase platform. When contacting support, please provide the following information to help us assist you more efficiently:

  • Your order ID
  • Your car model
  • The year of your car
  • The screen size of your car's display
  • Your toggle switch setup (DIP switch positions)
  • Pictures of your LVDS cable connections
  • The software version of your CarPlay decoder box (found in the CarPlay decoder menu: Setup > System Version)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.