OBD2 Scanner DS150E / JDiag P100

Contents

V9.1 OBD2 Scanner Diagnostic Tool User Manual

Model: DS150E / JDiag P100

1. Introduction

The V9.1 Dual-board OBD2 Scanner Diagnostic Tool (DS150E / JDiag P100) is a quick and reliable diagnostic tool designed to serve as a link between your vehicle and a computer. It is compatible with a wide range of both old and new vehicles, offering comprehensive diagnostic capabilities for cars and trucks. This tool features a VCI (Vehicle Communication Interface) with Bluetooth connectivity and utilizes a dual-board design with 21 imported NEC relays for enhanced performance and stability.

2. Safety & Warnings

Please read all instructions carefully before using this product. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep out of reach of children: Ensure the device and its cord are kept away from children under 3 years old. Adult supervision is required for older children.
  • Intended Use: Do not use this product for purposes other than its intended diagnostic function.
  • Inspection: Always inspect the product for any damage before each use. Do not use if damaged.
  • Installation & Operation: Follow all installation and operation guidelines to prevent injury.
  • Environmental Conditions: Do not expose the device to water or moisture.

3. Package Contents

The standard package includes the following items:

  • Main diagnostic unit
  • Software DVD (version as chosen at purchase)
  • USB cable
  • LED OBD2 cable
  • Optional: 8-piece car cable set (if chosen)

Optional 8-Piece Car Cable Set:

This set provides specialized cables for various car brands, including:

  • Cable for P-SA 30PIN
  • Cable for P-SA 2P
  • Cable for Audi 2P+2P
  • Cable for BENZ 38P
  • Cable for BMW 20P
  • Cable for OPEL 10P
  • Cable for FIAT 3P
  • Power Cable
Image of the 8-piece car cable set
Figure 1: Optional 8-piece car cable set for various vehicle connections.

4. System Requirements

The diagnostic software is compatible with the following operating systems:

  • Windows XP
  • Windows 7 (32-bit and 64-bit)
  • Windows 8 (32-bit and 64-bit)
  • Windows 10 (32-bit is generally more stable; 64-bit compatibility depends on computer configuration)
  • Windows 11 (supported only with 2021.11 software version)
Logos of supported Windows operating systems
Figure 2: Supported Windows operating systems.

5. Software Installation & Activation

To use the diagnostic tool, you must first install and activate the software on your computer. The software DVD contains the necessary installation files and a keygen for activation.

  1. Insert the software DVD into your computer's DVD drive.
  2. Follow the on-screen instructions to install the diagnostic software.
  3. Locate and run the provided keygen application from the DVD or installation directory.
  4. Follow the keygen instructions to generate a hardware key and activate your software. This process allows you to activate the software yourself without external assistance.

Available software versions:

  • 2021.11 (with NEW Keygen): Supports cars up to model year 2021. Keygen included on CD for self-activation.
  • 2020.23 (with Keygen): Supports cars up to model year 2020. Keygen included on CD for self-activation.
  • 2017.R3 (with Keygen): Supports cars up to model year 2017. Keygen included on CD or via link for self-activation.
Screenshot of 2021.11 software with Keygen
Figure 3: Software version 2021.11 with Keygen for self-activation.
Screenshot of 2020.23 software with Keygen
Figure 4: Software version 2020.23 with Keygen for self-activation.
Screenshot of 2017.R3 software with Keygen
Figure 5: Software version 2017.R3 with Keygen for self-activation.

For a visual guide on software installation and activation, please refer to the following video:

Video 1: Step-by-step guide for software installation and activation.

6. Hardware Setup

  1. Connect the diagnostic tool to your computer using the provided USB cable.
  2. Locate the OBD-II diagnostic port in your vehicle (typically under the dashboard).
  3. Connect the appropriate diagnostic cable (LED OBD2 cable or an adapter cable from the 8-piece set) from the tool to your vehicle's diagnostic port.
  4. Ensure a secure connection.

7. Operating Instructions

Once the hardware is connected and the software is installed and activated, you can begin diagnosing your vehicle.

General Functions:

  • Read and erase fault codes
  • Read live data
  • Perform basic settings
  • Execute scan functions
  • Full compliance with eOBD/OBDII standards

Specific Diagnostic Capabilities:

  • Manufacturer-specific serial diagnostics
  • Diagnosis of various systems: Engine, Ignition, ABS, SRS, Immobilizer, Instrument, Comfort system, Gearbox, etc.
  • Service reset functions

Key Features:

  • FLIGHT RECORDER: Records vehicle parameters in real-time while driving. Allows highlighting specific errors with a button press for later investigation. Equipped with built-in memory (memory card not included).
  • VOLTAGE CHECK: Automatically checks and adjusts to vehicle battery voltage (12V or 24V). Provides audio and visual warnings if voltage is too high or too low.
  • CHASSIS NUMBER VIN: Smart function in CARS software to automatically read the VIN, ensuring correct model and year selection. Also automatically selects engine code for common vehicles.
  • ISS (Intelligent System Scan): Scans all vehicle systems and displays stored fault codes, providing a quick overview of the vehicle's status. Allows selection of specific control systems for further analysis.
  • ISI (Intelligent System Identification): Automatically identifies and selects the correct controller type mounted in the vehicle, ensuring accurate diagnostic sessions.
  • OBD-FUNCTIONS: Utilizes unique multiplexer technology for compatibility with all vehicle types, regardless of voltage levels and communication standards. Adapter cables are available for non-standard 16-pin connectors.
  • UNIVERSAL: Provides detailed instructions and help texts within the software for most OBD functions, adjustments, and programmings, simplifying complex tasks.
Screenshot showing system type selection in diagnostic software
Figure 6: Selecting system type for diagnosis.
Screenshot showing language selection in diagnostic software
Figure 7: Language selection options in the diagnostic software.

Supported Vehicles:

The tool supports a wide range of car and truck models. A detailed list can be found in the software interface.

  • Supported Car Models (47 brands): Alfa Romeo, Audi, BMW, Cadillac, Chevrolet, Chrysler, Citroen, Dacia, Daewoo, Dodge, Ferrari, Fiat, Ford, Honda, Hyundai, Isuzu, Iveco, Jaguar, Jeep, Kia, Lamborghini, Lancia, Land Rover, Lexus, Lotus, Mahindra/Renault, Maserati, Mazda, Mercedes, MG, Mini, Mitsubishi, Nissan, Opel/Vauxhall, Peugeot, Porsche, Renault, Rolls-Royce, Rover, Saab, Samsung, Seat, Skoda, Smart, Ssang Yong, Subaru, Suzuki, Toyota, VW.
  • Supported Truck Models (37 brands): Allison, Chevrolet, Citroen, Dacia, D-AF, Fiat, Ford, Hyundai, Isuzu, Iveco, Iveco Trucks, Kia, Man, Man bus chassis, Mazda, Mercedes, Mitsubishi, Nissan, Opel/Vauxhall, Peugeot, Renault, Renault Trucks, Scania, Scania Bus Chassis, Seat, Skoda, Toyota, Trailers, Volkswagen, Volvo Bus Chassis, Volvo Trucks.

8. Maintenance

  • Always turn off the device and disconnect it from the vehicle and computer when not in use.
  • Store the device and all accessories in a dry place, away from direct sunlight and extreme temperatures.
  • Keep the device clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Ensure all cables are stored neatly to prevent damage.

9. Troubleshooting

  • Software not launching/activating: Ensure all software components are correctly installed and activated using the provided keygen. Check system compatibility with your operating system.
  • Connection issues: Verify that the diagnostic tool is securely connected to both the computer (via USB or Bluetooth) and the vehicle's OBD-II port. Ensure the vehicle's ignition is on.
  • No communication with vehicle: Check if the correct diagnostic cable is being used for your specific vehicle model. Ensure the vehicle's battery voltage is within the normal operating range (12-24V).
  • Lost software CD: If your software CD is lost, please contact the manufacturer or seller for assistance in obtaining a replacement or a digital download link.

10. Specifications

Feature Detail
Communication Interface OBD-II, Bluetooth, USB
Software Update No (Activation via Keygen)
Wireless Support Bluetooth
Batteries Included No
Item Weight 0.65 kg
Item Dimensions (L x W x H) 23cm x 15cm x 6cm
Voltage 12-24V
Certifications CE
Origin Mainland China

11. User Tips

  • Always back up your software installation files and activation keys to a safe location.
  • For optimal performance, ensure your computer meets the recommended system requirements, especially for 64-bit Windows 10/11.
  • If you encounter any issues with software activation or lost installation media, contact the manufacturer or seller for support.

12. Manufacturer & EU Representative Information

Manufacturer:

Shenzhen Global Feichi Technology Co., Ltd.
C1009, Gangshen International Center, Xinniu Community, Minzhi Street,
Longhua District, Shenzhen City, China, Guangdong Province
Email: szhqfc3@163.com
Phone: 86-18037149576

EU Authorized Representative:

BORCES JEREZ
79 Rue de Patay, 75013, Paris, France
Email: services@yqyic.fr
Phone: 33-0748578459

A detailed user manual in PDF format is available for reference. Please consult it for additional information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.