Introduction
Thank you for choosing the DATA FROG S80 Wireless Game Controller. This gamepad is designed to enhance your gaming experience across multiple platforms, including Nintendo Switch, Switch Lite, Switch OLED, iOS, Android, and PC. It features advanced functionalities such as customizable RGB lighting, programmable buttons, adjustable turbo and vibration, and a 6-axis gyro sensor for precise control. Please read this manual carefully to ensure proper setup and optimal use of your new controller.

Figure 1: DATA FROG S80 Wireless Game Controllers
Package Contents
Ensure all items are present in your package:
- 2 x DATA FROG S80 Wireless Game Controllers
- 2 x USB-C Charging Cables (support data import)
- 1 x Instruction Manual (this document)

Figure 2: Included items in the package
Setup and Connection
The DATA FROG S80 controller supports multiple connection methods depending on your gaming platform.
1. Connecting to Nintendo Switch / Switch Lite / Switch OLED
- On your Nintendo Switch console, navigate to the HOME Menu.
- Select "Controllers" then "Change Grip/Order".
- Long press the connection button located on the back of the DATA FROG S80 controller.
- The controller will enter pairing mode, and the console will detect it.
- Once detected, the controller will pair automatically.
The controller also supports a one-key awakening function. After initial pairing, simply press the HOME button on the controller to wake up your console.

Figure 3: Nintendo Switch Pairing and Awakening
2. Connecting to Android Devices
- Long press the A button and the Home button simultaneously on the controller to enter pairing mode.
- On your Android phone, go to Bluetooth settings.
- Select "Gamepad" from the list of available devices to connect.
3. Connecting to PC (Windows 7/8/10)
For PC, the controller primarily works via a wired connection.
- Connect the controller to your PC using the provided USB-C charging cable.
- The PC will automatically recognize the controller as an X-Input device.
- For wireless connection to PC, long press the B button and the Home button simultaneously on the controller.
- On your PC, go to Bluetooth settings and select "Xbox Wireless Controller" to connect.

Figure 4: Wired PC Connection
4. Connecting to R36S (PSP Emulator)
To connect the controller to an R36S console for PSP emulation, use an OTG adapter:
- Connect the controller to the R36S console via an OTG adapter and the USB-C cable.
- On the R36S console, press the right stick.
- Navigate to "Setting" → "Controls".
- Proceed to "Controls mapping" and set the button mappings in sequence according to your preference.
5. Connecting to iOS Devices (iOS 13.0 and above)
- Long press the X button and the Home button simultaneously on the controller to enter pairing mode.
- On your iOS device, go to Bluetooth settings.
- Select the controller from the list of available devices to connect.
Video 1: DATA FROG S80 Controller Connection Guide (Switch, Android, PC, R36S)
Operating Instructions
1. LED Lighting Modes
The controller features 9 colors of light, including 8 colors for the joysticks and 1 rainbow RGB LED light. You can adjust these via the LED light control button on the controller.
- Strobe Mode: The rainbow-color LEDs flash quickly, creating a dynamic effect.
- Breathing Mode: The 8 colors of LEDs cycle slowly, providing a smooth transition.
- Static Mode: The joysticks maintain a single color of your choice.
You can freely switch between these modes or turn off the lighting as desired.

Figure 5: RGB LED Lighting Modes
2. Programmable Buttons (M1/M2)
The controller includes two back buttons, M1 and M2, which can be programmed to replicate 1-16 basic button functions. This allows for optimized gameplay and reduces finger strain.
- Example Mapping: M1/M2 can be programmed to a sequence like A+B+Y+L+ZL+R+ZR+D-pad.
Refer to the controller's quick start guide for detailed programming instructions.

Figure 6: Programmable M1/M2 Buttons
3. Turbo Function
The controller supports both auto TURBO and manual TURBO modes. You can assign the TURBO function to A/B/X/Y/L/ZL/R/ZR keys.
- Adjustable Speeds: Choose from 5 shots/second, 12 shots/second, or 20 shots/second.
This feature allows for rapid, repeated button presses, giving you an edge in fast-paced games.

Figure 7: Turbo Function Settings
4. Vibration Function & 6-Axis Gyro Sensor
Experience immersive feedback with dual vibration motors and precise motion control.
- Vibration Levels: Four adjustable levels: None (0%), Weak (25%), Medium (50%), and Strong (100%). Adjust with a single click to suit your preference.
- 6-Axis Gyro Sensor: Detects controller inclination for precise motion sensing control, enhancing gameplay in compatible titles.

Figure 8: Vibration Modes and 6-Axis Gyro Sensor
5. Screenshot and Video Sharing
The controller includes a dedicated Share button, allowing you to instantly capture and share screenshots and video clips of your gameplay moments.
Maintenance
1. Charging the Controller
The controller is equipped with a 900mAh battery for extended gameplay.
- Battery Capacity: 900mAh
- Charge Time: Approximately 3 hours for a full charge.
- Play Time: Up to 15 hours on a full charge.
Use the provided USB-C charging cable to connect the controller to a power source (e.g., console, PC, USB wall adapter). The LED indicators on the controller will show charging status.

Figure 9: Battery Life and Charging
2. Cleaning and Storage
- Cleaning: Use a soft, dry cloth to clean the controller. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
Troubleshooting
1. Controller Not Connecting/Pairing
- Ensure the controller is sufficiently charged.
- Verify you are using the correct button combination for pairing with your specific device (e.g., NS: back connection button; Android: A + Home; iOS: X + Home; PC Bluetooth: B + Home).
- Make sure Bluetooth is enabled on your device.
- Try restarting both the controller and your gaming device.
- If connecting to PC wirelessly, ensure your PC's Bluetooth adapter is functioning correctly and try connecting via wired USB-C first.
2. Buttons/Joysticks Not Responding
- Check if the controller is properly connected to your device.
- Ensure the game you are playing supports controller input.
- For R36S, double-check the button mappings in the emulator settings.
- Try resetting the controller (refer to the quick start guide for reset instructions, usually a small pinhole button).
3. Vibration Not Working
- Verify that the vibration function is enabled in your game settings and on the controller (if applicable).
- Check the vibration intensity settings on the controller.
4. LED Lights Not Functioning
- Ensure the controller is powered on.
- Cycle through the LED modes using the dedicated LED light control button.
- Check if the battery is low, which might affect lighting performance.
Specifications
| Feature | Description |
|---|---|
| Brand Name | DATA FROG |
| Model | S80 |
| Type | Gamepads |
| Compatible Brand/Model | Nintendo |
| Compatible Nintendo Model | Nintendo Switch, Nintendo Switch OLED, Nintendo Switch Lite |
| Compatible Platforms | Nintendo Switch, Switch Lite, Switch OLED, iOS (13.0+), Android, PC (Windows 7/8/10) |
| Connection Type | Wireless (Bluetooth), Wired (USB-C for PC) |
| Battery Included | Yes |
| Battery Capacity | 900mAh |
| Charge Time | Approx. 3 hours |
| Play Time | Approx. 15 hours |
| Trigger Button Type | Non-Linear |
| Vibration | Dual motors, 4 adjustable levels (0%, 25%, 50%, 100%) |
| Motion Control | 6-Axis Gyro Sensor |
| LED Lighting | 9-Color RGB LEDs (Strobe, Breathing, Static modes) |
| Programmable Buttons | M1/M2 back buttons (1-16 basic button functions) |
| Turbo Function | Auto/Manual, 3 speeds (5/12/20 shots/s) |
| Ergonomics | Textured non-slip grips |
| Package Dimensions | Length: 26 cm, Width: 19 cm, Height: 12 cm |
| Package Weight | 0.65 kg |
| Origin | Mainland China |
Gyro Manual Calibration
If you experience issues with the gyro sensor's accuracy, you may need to perform a manual calibration:
- Place the controller on a flat, stable surface.
- Refer to the quick start guide (PDF) for the specific button combination to initiate gyro calibration. This typically involves holding certain buttons while the controller is off, then powering it on.
- Follow any on-screen prompts or LED indicator patterns to complete the calibration process.
User Tips
- Ergonomic Design: The controller's redesigned grips with unique texture are non-slip and comfortable, helping to prevent hand fatigue during long gaming sessions.
- Multi-Platform Versatility: Take advantage of the controller's wide compatibility to enjoy your favorite games on Switch, mobile devices, and PC.
- Customizable Experience: Experiment with the 9-color RGB LED lighting modes, adjustable vibration levels, and programmable M1/M2 buttons to personalize your gameplay.
- Wired PC Connection: For optimal performance and minimal latency on PC, consider using the wired USB-C connection, as wireless functionality for PC may vary or require specific drivers/settings.

Figure 10: Ergonomic Design for Comfortable Grip
Warranty and Support
For warranty information, technical support, or any inquiries regarding your DATA FROG S80 Wireless Game Controller, please refer to the seller's official website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
A user manual in PDF format is also available for download from the seller's product page for more detailed instructions.