HZTZ C801

Contents

Portable A4 Bluetooth Thermal Tattoo Stencil Printer

Model: C801 | Brand: HZTZ

1. Introduction

Thank you for choosing the HZTZ C801 Portable A4 Bluetooth Thermal Tattoo Stencil Printer. This innovative device offers inkless, cost-effective, and multi-functional printing, making it an ideal tool for tattoo artists and professionals needing on-site document printing.

Its compact design and universal compatibility ensure ease of use and portability for various applications.

Image showing the printer's inkless printing feature, highlighting cleanliness and cost-effectiveness.
Inkless Printing: Clean and Cost-Effective
Image showcasing the printer's compact size (29.5cm x 4.2cm x 5.5cm) and portability, easily fitting into a bag.
Small Body, Easy to Carry: Dimensions 29.5cm x 4.2cm x 5.5cm (11.61in x 1.65in x 2.17in)
Image highlighting the printer's multi-functionality, supporting both thermal paper and tattoo transfer paper.
Multi-Function Printing: Supports Thermal and Tattoo Paper

2. Safety Information and Precautions

Please read and understand the following safety guidelines before using the printer:

  • The product does not include a power adapter. If using an adapter for charging, ensure it is a certified 5V/2A power adapter that meets relevant standards.
  • This is a professional product; use only original accessories and consumables.
  • The printer contains a built-in lithium battery. Do not use it in environments with temperatures higher than 40°C. Keep away from fire and other heat sources. Avoid placing it in direct hot sunlight or a closed car.
  • Children should use and charge the device under adult supervision. After a full charge, promptly disconnect the charging cable to prevent overheating, short circuits, or fire hazards.
  • Do not expose the product to fire or water to avoid battery short circuits, fire, or burns.
  • Operating environment: 0°C - 40°C ambient temperature, relative humidity 30%-85%RH (non-condensing). Do not exceed the recommended temperature range.
  • If you suspect a problem with the battery, contact the after-sales service center for assistance.

3. Components Overview

Familiarize yourself with the main parts of your C801 printer:

  • Open Key: Press left and right open keys simultaneously to open the cover.
  • Power Key: Press and hold for 3 seconds to turn the printer on/off.
  • Upper Cover: Protects the print head and paper path.
  • Print Head: The thermal printing mechanism.
  • Lower Cover: The base of the printer.
  • USB Interface: For connecting to a computer via USB cable.
  • Paper Size Switch: Adjusts for 216mm (US Letter/Legal) or 210mm (A4) paper sizes.
Diagram showing the components of the C801 printer, including open keys, power key, upper cover, print head, lower cover, USB interface, and paper size switch.
C801 Printer Components and Controls

4. Specifications

FeatureSpecification
Product CodeC801
FCC ID246FW-C80
Dimension11.5 x 2.1 x 1.5 Inch
Weight1.17 lbs
Printing MethodDirect Thermal
Resolution203 dpi
Max Printing Speed20 mm/s
Input Power5V/2.0A
Man-Machine InterfaceKey, LED Indicator, Drive
Communication InterfaceUSB, BT2088T4.0 (Bluetooth)
Operating Temperature0°C - 40°C
Working Humidity30%-85% RH (No Condensation)
Storage Temperature-20°C - 60°C
Storage Humidity0 - 90% RH (No Condensation)
Battery Capacity1500mAh (Prints up to 200 sheets on full charge)
Image illustrating the printer's large capacity 1500mAh battery, USB-C fast charging, and ability to print up to 200 sheets on a full charge.
Large Capacity Battery for Extended Use

5. Setup

5.1. App and Driver Installation

To use your HZTZ C801 printer, you will need to install the appropriate application or drivers for your device.

Download HyPrint App (for Mobile Devices)

Scan the QR code provided in your manual or visit gzhztz.com to download the HyPrint app for iOS (Apple App Store) or Android (Google Play).

Screenshot of the HyPrint app, showing various templates for documents, photos, webpages, and tattoos, emphasizing auto-updates and free access.
HyPrint App Interface with Abundant Templates

Windows Thermal Printer Driver Installation

  1. Before installation, turn off any antivirus software on your computer.
  2. Visit help.trashlabel.com and search for keyword 'C80' to download the driver.
  3. Turn on the printer and connect it to your computer via the USB cable.
  4. Double-click the compressed file you downloaded to install the driver.
  5. NOTE: Select the correct corresponding printer driver option during installation.

MacOS Thermal Printer Driver Installation

  1. Before installation, turn off any antivirus software on your computer.
  2. Visit help.flashlabel.com and search for keyword 'C80' to download the driver.
  3. Turn on the printer and connect it to your computer via the USB cable.
  4. Double-click the compressed file you downloaded to install the driver.

5.2. Paper Loading

The C801 printer supports A4, US Letter, and US Legal paper sizes. Adjust the paper size switch on the printer to match your paper type (216 for US Letter/Legal, 210 for A4).

Loading Thermal Paper (Roll or Fan-Fold)

  1. Open the printer cover.
  2. Take out the thermal paper and ensure the printing side is face down.
  3. Insert the paper from the back of the printer until the printer automatically feeds it.
  4. Close the printer cover.
Image demonstrating the printer's compatibility with different paper types, including roll paper and fan-fold paper in 8.5'x11' and A4 sizes.
Supports Roll and Fan-Fold Paper (8.5"x11" & A4 Size)

Loading Tattoo Transfer Paper

  1. Remove the protective sheet before drawing.
  2. Tear off the yellow backing paper.
  3. Make sure the white printing paper is face down and the transfer paper is face up.
  4. Insert the paper from the back of the printer until it automatically feeds.
Diagram illustrating the correct way to load tattoo transfer paper into the printer, showing the protective sheet, carbon paper, and yellow backing paper.
Tattoo Transfer Paper Installation Guide

6. Operating Instructions

6.1. Power On/Off

Press and hold the Power Key for 3 seconds to turn the printer on or off.

6.2. Status Indicator Lights

StatusDescriptionTroubleshoot
GreenNormal operation-
Flashing Red and GreenPrinter head is overheatedPrinter will automatically resume once the print head has cooled down.
RedCharging, Top cover open, No paperWhen fully charged, the light turns green. Close the top cover correctly.
Flashing RedLow electric quantityCharge the printer.
BlueBluetooth pairing successfully, Bluetooth connected successfully-
Flashing BlueBluetooth is initializing or disconnectedClose the app first. Restart the printer and wait for the blue light to stop flashing. Then reconnect the app.

6.3. Printing from Mobile App (HyPrint)

Once the HyPrint app is installed and your printer is connected via Bluetooth, you can select images, documents, or tattoo templates to print. The app allows you to adjust print density (Low, Mid, High), print mode (Photo, Tattoo), paper type (Continuous, Black Mark), paper size, and margin size.

Video demonstrating iOS connection, app usage, and printing a tattoo stencil.

6.4. Printing Tattoo Stencils Step-by-Step

  1. Prepare your tattoo transfer paper as instructed in Section 5.2.
  2. Load the prepared tattoo transfer paper into the printer.
  3. Use the HyPrint app to select your tattoo design. Adjust print settings as needed (e.g., print density, print mode to 'Tattoo').
  4. Initiate printing from the app. The printer will transfer the design onto the stencil paper.
  5. Once printed, cut the transfer stencil to a suitable size.
  6. Apply transfer paste to the skin where the tattoo will be placed.
  7. Carefully place the stencil onto the prepared skin.
  8. Remove the transfer paper and allow the design to dry on the skin.
Step-by-step visual guide on how to use the thermal tattoo printer, from preparing the stencil paper to applying the transfer paste on the skin.
How to Use Tattoo Thermal Printers

7. Maintenance

7.1. Cleaning the Print Head

To ensure optimal print quality and prolong the life of your printer, regularly clean the print head:

  1. Shut down the printer and open the printer cover. Remove any paper inside.
  2. Dip a cotton cloth or cotton swab into medical alcohol.
  3. Gently wipe the print head from the center outwards.
  4. After cleaning, do not use the printer immediately. Wait 1-2 minutes for the alcohol to completely evaporate.

8. Troubleshooting

Refer to the 'Status Indicator Lights' table in Section 6.2 for common issues and their solutions. If the problem persists, try the following:

  • Printer not responding: Ensure the printer is charged and powered on. Check the USB or Bluetooth connection.
  • Poor print quality: Clean the print head as described in Section 7.1. Ensure you are using high-quality thermal or tattoo transfer paper. Adjust print density settings in the app.
  • Paper jam: Turn off the printer, open the cover, and carefully remove any jammed paper. Ensure paper is loaded correctly and not wrinkled.
  • App connectivity issues: Close the HyPrint app, restart the printer, and ensure Bluetooth is enabled on your device. Reconnect through the app.

9. User Tips

  • Always perform a test print on a scrap piece of paper when using new paper types or adjusting settings to ensure desired results.
  • For tattoo stencils, ensure the transfer paste is applied evenly and thinly for a clear and crisp transfer.
  • Keep the printer in a clean, dust-free environment to prevent debris from affecting the print head.
  • Charge the printer fully before extended use, especially when working remotely, to avoid interruptions.

10. Warranty and Support

For any issues with your HZTZ C801 printer, especially concerning the battery or other hardware malfunctions, please contact the after-sales service center for assistance. Keep your purchase receipt for warranty claims.

11. FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body. Use only the supplied antenna.

Operating Frequency Band: 2402-2480MHz
Maximum Radio-Frequency Power: 0-0.88dBm

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.