Introduction
This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Fenvi WR1200S AC1200 Wireless Router. This dual-band Gigabit Ethernet router functions as a signal extender, repeater, amplifier, and booster, providing high-speed Wi-Fi across both 2.4GHz and 5GHz frequencies. Please read this guide carefully to ensure optimal performance and safe use of your device.
Safety Information
- Ensure the router is placed in a well-ventilated area to prevent overheating.
- Use only the provided power adapter (DC12V/1A) to avoid damage to the device.
- Keep the device away from water, fire, and high temperatures.
- This device is intended for indoor use only.
- Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
Package Contents
Verify that your package contains the following items:
- WiFi router x 1
- Power adapter x 1
- Ethernet cable x 1
- Quick installation guide x 1 (PDF version available for download)
Product Overview
The Fenvi WR1200S AC1200 Wireless Router features four external 5dBi antennas for strong signal coverage, a Gigabit port for high-speed wired connections, and MU-MIMO technology for efficient multi-device communication. It supports both 2.4GHz and 5GHz bands for versatile connectivity.
Setup Instructions
For a visual guide, please refer to the Quick Installation Guide image below or the downloadable PDF manual.
Step 1: Connect Your Devices
- Power off your modem and remove its battery (if any).
- Connect the WAN port of the router to a LAN port of your modem or to an Ethernet jack using the provided Ethernet cable.
- Reinstall the modem's battery and power on your modem.
- Use the included power adapter to connect the router to a power source. The LED indicator lights should turn solid on.
- Connect your devices to the router:
- Wireless devices: Connect to the router's WiFi network using the default WiFi name (SSID) and password found on the bottom label of the router.
- Wired devices: Connect wired devices to ports LAN1, LAN2, or LAN3 of the router.
- WPS: Press the WPS button on the router, then enable WPS on another device within 2 minutes to establish a connection.
Step 2: Set Up the Router for Internet Access
- Start a web browser on a device connected to the router (either wirelessly or via Ethernet).
- In the address bar, enter
192.168.100.1and press Enter. - Follow the on-screen Configuration Wizard to customize your WiFi Name (SSID) and WiFi Password. Click 'Next'.
- Set your internet connection type. For PPPoE connections, enter the User Name and Password provided by your Internet Service Provider (ISP).
Step 3: Access the Internet
- Wireless devices: Connect your wireless devices to the router's WiFi network using the new WiFi name and password you set during setup. The 2.4 GHz WiFi name is the one you set, and the 5 GHz WiFi name will be the 2.4 GHz name plus a suffix '_5G'.
- Wired devices: Devices connected to the LAN ports of the router can access the internet directly.
Operating Instructions
Dual-Band Operation
The WR1200S router operates on two frequency bands: 2.4GHz and 5GHz. This allows for flexible connectivity and optimized performance.
- 2.4GHz Band (300 Mbps): Ideal for general web browsing, email, and chat. It offers wider coverage and better penetration through walls.
- 5GHz Band (867 Mbps): Provides faster speeds for demanding applications like 4K video streaming, online gaming, and large file transfers. It offers less interference but has a shorter range.
The 5GHz band utilizes 4T4R architecture, which provides more transmission channels compared to traditional 3T3R setups, resulting in a better internet experience.
Wider Coverage
With four high-gain antennas and Beamforming technology, the WR1200S provides wider Wi-Fi coverage, up to 120 m², ensuring a strong signal throughout your home.
Wireless Security and Privacy
The router includes several features to protect your network and privacy:
- WPA/WPA2-PSK Encryption: Secures your wireless network from unauthorized access.
- Customer Filter: Allows you to control access for specific devices.
- Black List: Block unwanted devices from connecting to your network.
- Wi-Fi Schedule: Set specific times for your Wi-Fi network to be active.
- Guest Network: Provide separate network access for guests without compromising your main network.
- Network Speed Limit: Manage bandwidth usage for connected devices.
Maintenance
- Cleaning: Gently wipe the router with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Firmware Updates: Periodically check the manufacturer's website for firmware updates to ensure optimal performance and security.
- Placement: Ensure the router is placed centrally in your home, away from obstructions and other electronic devices that may cause interference.
User Tips
- If you experience issues accessing the router's web management page, try rebooting the router, clearing your browser cache, or using a different web browser.
- For internet connectivity problems, power cycle your modem and router. If the issue persists, connect a computer directly to your modem to verify the internet connection, then check the router's WAN settings.
- If you forget your WiFi password, you can find the default password on the router's bottom label. Alternatively, connect a computer via Ethernet and access the web management page to reset it.
- Ensure your devices support 5GHz Wi-Fi if you intend to connect to the 5GHz network, as older devices may only support 2.4GHz.
Troubleshooting (FAQ)
- Q1: What should I do if I cannot access the web management page?
-
- Reboot your router and try again.
- If your computer is set to a static IP address, change its settings to obtain an IP address automatically.
- Verify that
http://192.168.100.1is correctly entered in the web browser, and press Enter. - Use another web browser and try again.
- Disable and enable the network adapter being used.
- Q2: What should I do if I cannot access the internet?
-
- Power off your modem for about 5 minutes, then power it on and check the internet. If your modem has more than one Ethernet port, keep other ports unconnected.
- Check if the internet is working normally by connecting a computer directly to the modem via an Ethernet cable. If it is not, contact your internet service provider.
- Log in to the web management page, and go to the Network Map page to check whether the internet IP address is valid or not. If it's valid, go to Network > Ethernet, modify DNS Type, select Manual, and use the following DNS addresses: set the primary DNS to 8.8.8.8, and set the secondary DNS to 8.8.4.4. If it is not, check the hardware connection or contact your internet service provider.
- Q3: How do I restore the router to its factory default settings?
-
- With the router powered on, use a pin to press and hold the RESET button on the back until the Power LED blinks.
- Log in to the web management page of the router, go to Management > Restart & Reset > Reset, and click Restore factory Settings. The router will restore and reboot automatically.
- Q4: What should I do if I forget my wireless network password?
-
- If you have not changed the default wireless password, it can be found on the label at the bottom of the router.
- Connect a computer directly to the router using an Ethernet cable. Log in to the router's web management page at
http://192.168.100.1, and go to Wireless > WiFi > WiFi Settings to retrieve or reset your wireless password.
- Q5: Why cannot my phone find the 5GHz signal?
-
Only devices supporting 5GHz signal can find and connect to the 5GHz wireless network. Ensure your phone or device is 5GHz compatible.
Specifications
| Feature | Description |
|---|---|
| Model Name | AC1200 WiFi Router (WR1200S) |
| Brand Name | fenvi |
| Frequency Band Class | Dual-Band (2.4GHz & 5GHz) |
| Wireless Transmission Rate | 1200Mbps (2.4G: 300Mbps, 5G: 867Mbps) |
| Wireless Communication Standard | 802.11ac/a/b/g/n |
| Wired Transfer Rate | 10/100/1000Mbps (Gigabit Ethernet) |
| WAN Ports | 1 x 10/100/1000Mbps RJ45 |
| LAN Ports | 3 x 10/100/1000Mbps RJ45 |
| Antenna | 4 x 5dBi External Antennas |
| Functions | Wireless Router Mode, Universal Repeater Mode, Firewall |
| Wireless Security | WPA-PSK, WPA2-PSK encryption |
| With Modem Function | No |
| Supports WPS | No (WPS button available for connection) |
| Supports WDS | No |
| Number of USB Interfaces | None |
| Power Adapter | DC12V/1A |
| Certification | CE |
| Application | Home |
| Coverage | Up to 120 m² (with Beamforming) |
| Heat Dissipation | Good (multiple cooling holes) |
Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. A detailed user manual in PDF format is available for download from the product page or by contacting customer support.
PDF Manual Reference: View User Manual (PDF)