1. Product Overview
The Hikvision DS-2CD2387G3-LI2UY is an 8 Megapixel Smart Hybrid Light Fixed Turret Network Camera featuring ColorVu 3.0 and AcuSense technologies. Designed for both indoor and outdoor use, it provides high-resolution imaging, intelligent event detection, and robust performance in various environments.

Figure 1: Hikvision DS-2CD2387G3-LI2UY 8MP IP Camera
Key Features:
- 8MP Ultra HD Resolution: Provides 3840 × 2160 resolution for high-definition imaging.
- ColorVu 3.0 Technology: F1.0 super aperture and 1/1.8" CMOS sensor for 24/7 full-color imaging in low light.
- Smart Hybrid Light: Offers three lighting modes (IR, White, or Smart) with intelligent auto-switching and up to 40m illumination distance.
- AI AcuSense 3.0: Focuses on Person and Vehicle classification, reducing false alarms by 99% using deep learning algorithms.
- Corrosion Resistant+: NEMA 4X certified protection, salt-spray & mist resistant, suitable for coastal and industrial environments.
- Dual-Mic: Built-in dual microphones for high-fidelity audio recording with noise filtering.
- IP67 Rated: Water and dust resistant for reliable outdoor performance.
- PoE Support: Power and data transmission via a single Ethernet cable.
- 2.8mm Fixed Lens: Provides an approximate 108.8° wide viewing angle.

Figure 2: Advanced Technology Overview
2. Setup and Installation
2.1 Package Contents
Before installation, verify that all items are present in the package:

Figure 3: Package Contents (Camera, Box, Drill Template, User Manual, Hex Key, Screws, Wall Plugs)
- Hikvision DS-2CD2387G3-LI2UY Camera
- Quick Start Guide / User Manual
- Drill Template
- Mounting Screws and Wall Plugs
- Hex Key
2.2 Physical Installation
The camera is designed for flexible installation in residential and commercial projects. It can be wall-mounted or ceiling-mounted. Ensure the mounting surface is strong enough to support the camera's weight.

Figure 4: Interface & Structural Design
- Mounting Location: Select a suitable location, considering the desired viewing angle and environmental conditions. The camera is built for harsh environments, operating from -30 °C to 60 °C (-22 °F to 140 °F).
- Drilling Holes: Use the provided drill template to mark and drill holes for mounting screws. For routing cables through the ceiling, use Hole A. For side outlet, use Hole B. Use a Ø5.5mm drill bit for expansion screws.
- Secure the Camera: Attach the camera base securely to the mounting surface using the provided screws.
- Adjust Angle: Adjust the camera's pan (0° to 360°), tilt (0° to 75°), and rotation (0° to 360°) to achieve the desired field of view.
2.3 Connections
The camera supports Power over Ethernet (PoE) for simplified installation or can be powered by a 12V DC adapter (optional).
- RJ45 Ethernet Port (PoE Supported): Connect an Ethernet cable from your network switch or PoE injector to the camera's RJ45 port. This single cable provides both power and data.
- 12V DC Power Input: If not using PoE, connect a 12V DC power adapter to the camera's power input.
2.4 Initial Configuration
After physical installation and connection, the camera needs to be activated and configured.
- Search Tool: Use Hikvision's SADP (Search Active Devices Protocol) tool on your PC to discover the camera on your network.
- Default IP: The camera's default IP address is
192.168.1.64. - Activation: The camera is in an inactivated status by default. You will need to set a strong password for the
adminusername during the initial activation process. - Access: You can access the camera's web interface via a web browser (Chrome 80+, Firefox 80+, Edge 89+ recommended) by entering its IP address.
3. Operating the Camera
3.1 Video Modes and Smart Hybrid Light
The camera offers versatile video modes to suit different lighting conditions.

Figure 5: Daytime, Night Mode IR, and Night Mode Full Color Comparison
Video 1: Demonstration of Daytime, Nighttime IR, and Nighttime Full Color modes.
- Daytime Imaging: Provides clear, high-resolution color images during the day.
- Night Mode - IR: Switches to infrared (IR) mode for black and white imaging in complete darkness.
- Night Mode - Full Color (ColorVu 3.0): Utilizes advanced sensor and Smart Hybrid Light to ensure superior night performance with full-color imaging even in very low light conditions.
- Smart Hybrid Light: Can be configured to automatically switch between IR and white light based on detected events or ambient light, or to use a combination.
3.2 Smart Remote Access & Audio Monitoring
Monitor your premises in real-time from anywhere using the mobile application.

Figure 6: Real-Time Video and Audio via Mobile App (Hik-Connect)
- Hik-Connect App: Download the Hik-Connect app for your smartphone (iOS/Android) to view live video, playback recordings, and receive alerts.
- iVMS-4200 (PC): For PC-based management and monitoring, use the Hikvision iVMS-4200 client software.
- Dual Built-in Microphones: The camera features dual microphones for clear, real-time audio recording and monitoring, with noise filtering for enhanced sound pickup.
3.3 AI Functions (AcuSense)
Leverage the camera's intelligent features for enhanced security.
- Motion Detection: Configure motion detection zones and sensitivity.
- Person and Vehicle Classification: The AcuSense technology can distinguish between humans, vehicles, and other moving objects, significantly reducing false alarms triggered by animals, rain, or leaves.
- Perimeter Protection: Set up line crossing, intrusion, region entrance, and region exiting detection with alarm triggering for specific target types (human and vehicle).
- Linkage Actions: Configure the camera to perform actions upon event detection, such as uploading to FTP/NAS/memory card, notifying surveillance center, triggering recording/capture, or sending email alerts.
4. Maintenance
- Cleaning: Regularly clean the camera lens with a soft, dry cloth. For stubborn dirt, use a cloth lightly dampened with water or a mild lens cleaning solution. Avoid abrasive cleaners.
- Firmware Upgrades: Keep your camera's firmware updated to ensure optimal performance, security, and access to new features. Firmware upgrades can typically be performed via the camera's web interface or through the iVMS-4200 client. The camera supports official firmware upgrades.
- Environmental Protection: While the camera is IP67 rated and corrosion-resistant, ensure its mounting remains secure and free from obstructions.
5. Troubleshooting
- No Power: Check the PoE connection or 12V DC power supply. Ensure the Ethernet cable is properly connected and the PoE switch/injector is active.
- No Video/Network Connection: Verify the Ethernet cable connection. Check network settings (IP address, gateway, DNS) using the SADP tool or web interface. Ensure there are no IP conflicts.
- Poor Image Quality: Clean the camera lens. Check for obstructions in the field of view. Adjust image settings (brightness, contrast, WDR, 3D DNR) via the web interface. Ensure sufficient lighting for optimal night vision.
- False Alarms: Adjust the sensitivity of motion detection or AI event detection. Refine detection zones. Ensure Person/Vehicle classification is enabled for relevant events.
- Forgot Password: If you forget the camera's password, you can use the password reset function, often involving a security code sent to a registered email or a reset file generated by Hikvision support.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | DS-2CD2387G3-LI2UY |
| Image Sensor | 1/1.8" Progressive Scan CMOS |
| Max. Resolution | 3840 × 2160 (8MP) |
| Min. Illumination | Color: 0.0005 Lux @ (F1.0, AGC ON), 0 Lux with light |
| Lens (mm) | 2.8mm Fixed Lens |
| Field of View (FOV) | Horizontal: 108.8°, Vertical: 56.4°, Diagonal: 134.3° |
| Illuminator Type | White Light, IR |
| Supplement Light Range | Up to 30 m |
| Connectivity | IP/Network Wired (RJ45 10 M/100 M self-adaptive Ethernet port) |
| Power Supply | PoE (IEEE 802.3af, Class 3, max. 11 W) or 12 VDC ± 25% (max. 8.5 W) |
| IP Rating | IP67 |
| Special Features | Waterproof / Weatherproof, Motion Detection, Color Night Vision |
| AI Functions | Motion Detection, Person and Vehicle Classification |
| Operating Conditions | -30 °C to 60 °C (-22 °F to 140 °F), Humidity 95% or less (non-condensing) |
| Shell Material | Metal |
| Dimensions | Ø138.3 mm × 115.4 mm (Ø5.4" × 4.5") |
| Weight | Approx. 750 g (1.7 lb.) |
| Certifications | CE, FCC, UL |
7. User Tips
- Recommended Apps: Use Hik-Connect for phone access and iVMS-4200 for PC management.
- Device Discovery: The SADP tool is essential for finding your camera on the network and initial setup.
- Default Credentials: Remember the default username is 'admin'. The camera requires you to set a strong password upon first activation.
- Network Setup: The default IP is 192.168.1.64. Ensure your network segment matches or adjust the camera's IP accordingly.
- Firmware: Always keep your camera's firmware updated for the best performance and security.
8. Warranty and Support
This Hikvision camera comes with a 3-Year Warranty and Lifetime Technical Support. For further assistance, you can contact Hikvision support:
- Website: www.hikvision.com
- Email Support: support@hikvision.com
A detailed user manual PDF is available for download from the manufacturer's website: Hikvision DS-2CD2387G3-LI2UY User Manual (PDF)