Introduction
The AZDOME OBD Hardwire Kit Type-C is designed to provide a reliable and convenient power solution for your dash cam and other compatible in-car devices. It enables essential features like 24-hour parking monitoring and low voltage protection, ensuring your vehicle is continuously protected without draining its battery. This kit offers a plug-and-play installation, making it easy to set up and use.
Key Features
- 24H Parking Monitoring: Enables your dashcam to automatically enter time-lapse recording mode after the car is turned off. It also allows the dashcam to save emergency video when a collision is detected, providing continuous surveillance.
- Intelligent Recognition of Auto Start-Stop: Intelligently recognizes the auto start-stop function, preventing accidental activation of parking monitoring during brief stops (e.g., at traffic lights) and avoiding unnecessary recordings and alerts.
- Efficient Power Output: Equipped with high-quality cables, it delivers a maximum output current of 2.5A. This ensures stable power for large-screen recorders, multiple cameras, GPS devices, and more, without performance degradation.
- Low Voltage Monitoring: Continuously monitors the vehicle's battery voltage. If the battery voltage drops below 11.8V ± 0.2V, the kit automatically stops drawing power to prevent excessive discharge and ensure the battery retains sufficient charge for starting the vehicle.
- Quick Installation: Features a universal interface for plug-and-play installation, requiring no additional settings. This allows for a fast and hassle-free setup.
- Multiple Security Protection: Engineered with comprehensive protection features including Safety Protection, Input Short-Circuit Protection, Output High Voltage Protection, Over-Current Protection, Short-Circuit Protection, and Over-Temperature Protection.
- Does Not Occupy Cigarette Lighter Port: Powers your device directly from the OBD port, leaving your cigarette lighter socket free for other uses.


Specifications
| Attribute | Value |
|---|---|
| Brand | AZDOME |
| Model Name | OBD01 |
| Item Type | Cables, Adapters & Sockets |
| Special Features | 24H Parking Monitor |
| Input Voltage | 12V-24V (Not applicable to heavy trucks) |
| Output Voltage | 5V |
| Maximum Output Current | 2.5A |
| Low Voltage Protection Voltage | 11.8V ± 0.2V |
| Cable Length | 11.48ft / 3.5m |
| Package Weight | 0.136 kg |
| Package Dimensions | 14 x 9 x 5 cm |

Package Contents
Your AZDOME OBD Hardwire Kit Type-C package should include:
- 1 x AZDOME OBD Hardwire Kit Type-C Cable
- 1 x Owner's Manual (PDF version available online)


Setup and Installation
Follow these steps to properly install your AZDOME OBD Hardwire Kit:
- Wiring: Carefully route the flat cable from your dash cam towards the vehicle's OBD port. Use a pry tool to tuck the cable neatly along the vehicle's trim and headliner to conceal it.
- Locate the OBD Interface: The OBD interface is typically located in the lower left corner of the steering wheel area. Refer to the diagram below for common locations. If unsure, consult your vehicle's user manual or a professional technician.
- Connect the OBD Cable: Plug the OBD connector of the hardwire kit into your vehicle's OBD port. Ensure a secure connection.
- Connect to Dash Cam: Plug the Type-C connector of the hardwire kit into your compatible dash cam.


Installation Video Guide
For a detailed visual walkthrough of the installation process, please watch the official video:
Operating Instructions
Once installed, the AZDOME OBD Hardwire Kit operates automatically to enhance your dash cam's functionality:
- 24H Parking Monitor: When your vehicle is turned off, the hardwire kit signals the dash cam to activate its parking monitoring mode. This typically involves time-lapse recording or event-triggered recording (e.g., collision detection). The parking monitoring function activates approximately 3 minutes after the vehicle is completely turned off.
- Low Voltage Protection: The kit continuously monitors your car battery's voltage. If the voltage drops to 11.8V (± 0.2V), it will automatically cut power to the dash cam to prevent the battery from being fully discharged, ensuring you can start your car.
- Intelligent Auto Start-Stop Recognition: The kit is designed to differentiate between the engine being fully off and temporary stops (like at a traffic light) in vehicles with auto start-stop systems. This prevents the parking monitor from activating unnecessarily during brief pauses.

User Tips
To ensure optimal performance and longevity of your dash cam and hardwire kit, consider the following tips:
- Memory Card: Always use an AZDOME memory card with U3 speed. Other cards may cause compatibility issues.
- Initial Setup: Format the memory card in your dash cam before its first use.
- Time Settings: Set the timezone, date, and time on your dash cam before regular operation.
- Avoid Disconnection During Recording: Do NOT plug or unplug the interior camera or SD card while the dash cam is recording.
- Consistent Power: Always connect with power when using the dash cam. If your dash cam has a Super Capacitor (instead of a battery), it only has a small internal battery (1mAh Lithium Metal Battery) for memory time, not for sustained operation.
Troubleshooting (FAQ)
- Q: Does my car have an OBD interface? What if it doesn't fit?
- A: All passenger cars are equipped with an OBD interface. It is typically located in the lower left corner of the steering wheel area. The OBD interface follows a global standardized protocol, so compatibility issues are rare. If you have trouble locating it, refer to your vehicle's user manual or consult a professional technician.
- Q: Will using this OBD cable drain my car battery?
- A: Absolutely not. The OBD cable has minimal power consumption in the static state, drawing only a few microamps of current, which is negligible for a car battery. Additionally, the built-in low voltage protection feature will automatically stop drawing power from the battery if its voltage drops below 11.8V ± 0.2V, ensuring sufficient voltage for starting your car.
- Q: How long does it take for the parking monitoring to activate after the vehicle is turned off using the OBD cable?
- A: It takes approximately 3 minutes. After the vehicle is completely turned off for 3 minutes, the OBD interface detects the ignition status as 'off' and sends a signal through the cable to activate the parking monitoring function of the connected dash cam.
Maintenance
To ensure the longevity and optimal performance of your AZDOME OBD Hardwire Kit, please follow these simple maintenance guidelines:
- Regular Checks: Periodically inspect the cable and connectors for any signs of wear, damage, or loose connections.
- Cleanliness: Keep the OBD port and connectors free from dust, dirt, and moisture. Use a dry, soft cloth for cleaning.
- Secure Installation: Ensure the cable remains securely tucked away and is not exposed to excessive tension or sharp edges that could cause damage.
- Avoid Extreme Conditions: While designed for automotive use, avoid exposing the kit to extreme temperatures or harsh chemicals.
Warranty and Support
AZDOME is committed to providing high-quality products and excellent customer service. Your AZDOME OBD Hardwire Kit comes with the following:
- Warranty Period: 12 months from the date of purchase.
- Regular Service: Free replacement within 1 month of purchase for manufacturing defects. Free maintenance within 12 months for non-user-induced issues.
- Extra Service: Pay-needed maintenance is offered for products with man-made damage.
- Lifetime Maintenance Guarantee: We offer a lifetime maintenance guarantee for our products.
Contact Information:
Website: www.azdome.hk
Email: info@dome.hk
Address: Office-F28/23 Tevver A Lechuanghul Building No.1211, Cuan Guang Road, Longhua District, Shenzhen, China
Certifications:
This product complies with relevant safety and environmental standards, including CE, FCC, and RoHS certifications.