Fccemc Spot Work Light

Contents

Motorcycle LED Spotlight Dual Color Hi/Low Beam Spot Fog Lamp User Manual

Brand: Fccemc | Model: Spot Work Light

1. Introduction

This manual provides essential information for the safe and effective installation and operation of your Fccemc Motorcycle LED Spotlight. This high-power LED work light bar is designed to deliver powerful illumination, ensuring clear vision and safety during night-time driving or off-road adventures. It features high-quality LED beads, an aluminum body for efficient heat dissipation, and offers versatile dual-color (white/yellow) lighting modes.

Fccemc Motorcycle LED Spotlight mounted on a motorcycle, with a close-up of the light bar in the foreground.
Figure 1: Fccemc Motorcycle LED Spotlight on a motorcycle.

2. Safety Information & Warnings

WARNING:

  • Install only on 12V DC vehicle electrical systems. Wrong voltage will cause burnout or fire.
  • Observe polarity (+/-) strictly. Reverse connection will damage the product.
  • Install with proper fuse protection to prevent overcurrent, short circuit, and fire risk.
  • Installation by a qualified electrician is recommended. Improper installation may cause vehicle failure or accident.
  • This product is not E-marked/not for road legal use; use on public roads at your own risk.
  • Keep out of reach of children.

3. Setup & Installation

This LED light strip is designed for 12V DC automotive use only. Before installation, please ensure the vehicle power supply is 12V. Disconnect the power during installation to avoid short circuits.

3.1 Wiring Installation

Follow the wiring diagram carefully:

  • Black wire: Connect to negative pole (-).
  • Red wire: Connect to positive pole (+) for white light.
  • Yellow wire: Connect to positive pole (+) for yellow light.
Wiring installation diagram showing black wire to negative, red wire to positive for white light, and yellow wire to positive for yellow light.
Figure 2: Wiring Installation Diagram.

3.2 Mounting the Light

  1. Clean and dry the installation surface thoroughly before sticking or mounting the light strip.
  2. Securely attach the light bar using the provided screws and mounting bracket.
  3. Ensure the light is positioned to provide optimal illumination without obstructing other vehicle components or driver visibility.

Professional installation is recommended for safety and stability.

4. Operating Instructions

The Fccemc LED Spotlight features dual-color functionality, allowing you to switch between white and yellow light modes. The specific method for switching between modes depends on how the light is wired to your vehicle's electrical system, typically via a dedicated switch or by cycling the power.

Video 1: Demonstration of the LED spotlight's dual-color modes (white, yellow, and combined).

The light can emit white light, yellow light, or a combination of both, providing versatility for different driving conditions such as fog or clear nights.

Three images showing the LED spotlight emitting white light, yellow light, and a combined white and yellow light.
Figure 3: Dual-color light output demonstration.

5. Maintenance

  • Regularly inspect the light bar for any signs of damage, loose connections, or corrosion.
  • Clean the lens with a soft, damp cloth to ensure maximum light output. Avoid abrasive cleaners that could scratch the lens.
  • Ensure the mounting hardware remains tight to prevent vibration and potential damage.
  • The aluminum lamp body is designed for good heat dissipation; ensure it is not obstructed to maintain optimal performance and prolong lifespan.

6. Troubleshooting

6.1 Light Not Turning On

  • Check all wiring connections for proper polarity and secure contact.
  • Verify that the vehicle's power supply is 12V DC.
  • Inspect the fuse for the circuit; replace if blown.
  • Ensure the switch (if installed) is functioning correctly.

6.2 Incorrect Light Color

  • Re-check the red and yellow wire connections to ensure they are connected to the correct positive terminals for the desired light color.
  • If using a switch to toggle colors, ensure the switch is wired correctly to alternate between the red and yellow wire inputs.

6.3 Flickering or Dim Light

  • Check for loose or corroded wiring connections.
  • Ensure the vehicle's electrical system is providing stable 12V power.
  • Verify that the light bar is receiving adequate current and there are no voltage drops.

7. Specifications

Feature Description
Product Name Car decorative light
Model Spot Work Light
Brand Name Fccemc
Origin Mainland China
Material Aluminum alloy + ABS + LED
Beam Pattern Spot Beam
Voltage Compatibility 12V DC (suitable for 12V systems)
Color Option White, Yellow (Dual Color)
Number of Lenses Available in 4, 5, or 6 lens configurations
Heat Dissipation Double heat dissipation design (aluminum alloy + heat dissipation slot)
High-concerned chemical None

7.1 Dimensions

The LED spotlight is available in different lengths depending on the number of lenses:

Diagram showing dimensions for 4-lens (12.7cm / 4.960inch), 5-lens (15.7cm / 6.181inch), and 6-lens (18.7cm / 7.362inch) versions. All versions have a height of 4cm / 1.574inch and a depth of approximately 3.5-3.8cm / 1.377-1.496inch.
Figure 4: Product Dimensions for different lens configurations.
  • 4-Lens Light: Approximately 12.7 cm (4.960 inches) in length.
  • 5-Lens Light: Approximately 15.7 cm (6.181 inches) in length.
  • 6-Lens Light: Approximately 18.7 cm (7.362 inches) in length.
  • All versions: Approximately 4 cm (1.574 inches) in height and 3.5-3.8 cm (1.377-1.496 inches) in depth.

8. User Tips

  • For optimal visibility in foggy conditions, utilize the yellow light mode.
  • Use the white light mode for general driving and maximum brightness.
  • Consider installing a separate switch for each color wire (red and yellow) to easily toggle between white, yellow, or combined light output.
  • Ensure the light bar is mounted securely to withstand vibrations from vehicle movement, especially for off-road use.

9. Frequently Asked Questions (FAQ)

Q: Can this light be used on vehicles other than motorcycles?

A: Yes, it is compatible with a wide range of 12V DC vehicles including Jeeps, trucks, tractors, SUVs, ATVs, 4x4s, engineering vehicles (excavators, road rollers), special vehicles (rescue vehicles, fire engines), trains, buses, and boats. It can also be used for indoor and outdoor lighting applications.

Images showing various applicable vehicle models including a sport motorcycle, a scooter, an auto-rickshaw, and a cafe racer style motorcycle.
Figure 5: Applicable Vehicle Models.

Q: Is this product waterproof?

A: The product is described as weatherproof, indicating it is designed to withstand various environmental conditions.

Q: What is the purpose of the aluminum lamp body?

A: The aluminum lamp body, combined with a heat dissipation slot design, ensures low heat and low energy consumption, providing a good heat dissipation effect to prolong the lifespan of the spotlights.

Close-up of the rear of the LED spotlight, showing the aluminum lamp body with heat dissipation fins and arrows indicating airflow.
Figure 6: Aluminum Lamp Body for Heat Dissipation.

10. Manufacturer & EU Representative Information

Manufacturer:

Guangzhou Zhengji Information Technology Co., Ltd
Address: Room 311, Building 2, Jiahe Creative Industry Park, Huangbian North Road, Baiyun District, Guangzhou City, Guangdong Province, China, 510440
Tel: 86-13535102100
E-mail: zj634216187@163.com

EU Authorized Representative:

Apex CE Specialists GmbH
Address: Grafenberger Allee 277, 40237 Dusseldorf, DE 3
E-mail: Info@apex-ce.com
Tel: +49 21312066043

11. Compliance Information

This product complies with EU RoHS and REACH environmental directives, meets LVD 2014/35/EU low-voltage electrical regulations and EMC 2014/30/EU electromagnetic compatibility regulations, and is suitable for use in the EU market.

For further details, you may refer to the official user manual PDF: View User Manual (PDF)

© 2024 Fccemc. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.