1. Product Overview
The ULTIMEA Poseidon R3T is a 2.1 channel soundbar system designed to enhance your home audio experience. It features a soundbar and a wireless subwoofer, delivering 240W peak power with advanced audio technologies like BassMX™ and VoiceMX™. Control is made easy through the dedicated Ultimea App or the included remote control.

The ULTIMEA Poseidon R3T Soundbar and its wireless subwoofer, showcasing the companion app interface.
Product overview video demonstrating the soundbar's features and immersive audio experience.
2. Package Contents
Please check the package carefully to ensure all items are present and in good condition.
- Soundbar (UC003)
- Wireless Subwoofer
- Power Adapter (x1)
- Power Cable (x1)
- HDMI Cable (x1)
- Optical Cable (x1)
- Remote Control (x1)
- AAA Batteries (x2) - Note: Batteries are not included and must be purchased separately.
- Wall Mount Kit (x1)
- User Manual (this document)

Visual representation of the soundbar, subwoofer, and all accessories included in the package.
3. Product Components
Familiarize yourself with the main components of your soundbar system.
Soundbar
- Main Unit: Houses the 2.25-inch midrange drivers and control panel.
- Control Buttons: Power, Volume Up/Down, Input Selection.
- Rear Ports: USB, Optical, HDMI to TV (ARC), DC IN.
Wireless Subwoofer
- Subwoofer Unit: Contains the 5.25-inch high-performance woofer.
- Power Input: AC IN.
Remote Control
The remote control allows you to manage power, volume, input, sound modes, BassMX, Midrange, Treble, LED Dimmer, and Prompt Tone settings.

Internal view of the soundbar's 2.25-inch midrange drivers and the 5.25-inch subwoofer.

Rear connection ports of the soundbar: USB, Optical, HDMI to TV (ARC), and DC IN.
4. Setup Instructions
4.1 Connecting the Soundbar Sections
The soundbar consists of two parts. Align the seams of the two parts and rotate them to connect. Ensure the device is not powered on during this process.

Aligning and rotating the soundbar sections for connection.
4.2 Subwoofer Pairing
Normally, the soundbar and subwoofer are pre-paired. If they become disconnected, follow these steps:
- Ensure both the soundbar and subwoofer are powered on.
- On the soundbar, press and hold the 'SUB PAIR' button (usually found on the back or bottom of the soundbar, or via the remote) for 5 seconds until the subwoofer indicator light flashes.
- On the subwoofer, press the 'PAIR' button (usually on the back).
- The subwoofer indicator light will turn solid when successfully paired.

Subwoofer pairing process: press SUB PAIR on soundbar, then PAIR on subwoofer.
4.3 Placement Options
The Poseidon R3T offers flexible placement options to suit your space.
- Tabletop Mount: Place the soundbar on a desk or TV stand.
- Wall Mount: Mount the soundbar on the wall using the provided wall mount kit. The installation height must not exceed 2 meters.

Flexible setup: soundbar can be placed on a desk or mounted on the wall.
4.4 Connecting to Your TV
Choose the best connection method for your TV:
HDMI (ARC) Connection (Recommended)
Connect an HDMI cable from the HDMI (ARC) port on the soundbar to the HDMI (ARC/eARC) port on your TV. This allows for audio return channel functionality, meaning TV audio can be sent to the soundbar, and you can often control the soundbar's volume with your TV remote.

Connect to TV via HDMI (ARC) and select 'ARC' input.
Optical Connection
Connect an optical cable from the OPTICAL port on the soundbar to the DIGITAL AUDIO OUT (OPTICAL) port on your TV. Select the 'OPT' input on the soundbar or remote.

Connect to TV via Optical and select 'OPT' input.
Bluetooth Connection
For wireless audio streaming from your mobile device, use Bluetooth. Short press the Bluetooth button on the soundbar or remote to select the Bluetooth channel. The indicator will flash. On your device, search for 'Poseidon R3T' and pair. Hold the Bluetooth button for 3 seconds to disconnect.

Bluetooth 6.0 for fast, stable, and low-latency wireless audio.
USB Connection
Insert a USB drive into the USB port on the soundbar to play audio files. The soundbar will automatically switch to USB input.
5. Operating Instructions
5.1 Basic Operation
- Power On/Off: Press the power button on the soundbar or remote.
- Volume Control: Use the Volume Up (+) and Volume Down (-) buttons on the soundbar or remote.
- Input Selection: Press the 'Source' button on the remote or the input button on the soundbar to cycle through HDMI (ARC), Optical, Bluetooth, and USB inputs.
5.2 Sound Modes (EQ Presets)
The soundbar offers 6 refined preset sound modes to optimize your listening experience for different content types. Select these modes using the remote control.
- Movie: Enhanced for cinematic sound.
- Music: Optimized for music playback.
- Voice: Boosts dialogue clarity.
- Sport: Ideal for sports broadcasts.
- Game: Immersive sound for gaming.
- Night: Reduces dynamic range for late-night listening.

Six preset sound modes for various content types.
5.3 App Control
Download the Ultimea App from your device's app store to unlock advanced control and customization options.
- 10-Band Equalizer Settings: Fine-tune bass, midrange, and treble frequencies to your preference.
- 121 Preset EQ Matrices: Choose from a wide range of pre-configured sound styles.
- OTA Updates: Receive firmware updates for continuous performance improvements and new features.

Smart App Control interface for managing sound modes, volume, and updates.

10-Band Equalizer Settings within the Ultimea App for personalized sound.

121 Preset EQ Matrices available through the Ultimea App for diverse audio styles.
6. Specifications
| Feature | Specification |
|---|---|
| Model | UC003 |
| Sound System | 2.1 Channel |
| Peak Power | 240W |
| Soundbar Drivers | 2 x 2.25-inch Midrange Drivers |
| Subwoofer Driver | 1 x 5.25-inch High-Performance Woofer |
| Frequency Response | 50Hz-18kHz (-6dB) |
| Connectivity | HDMI (ARC), Optical, USB, Bluetooth 6.0 |
| Power Supply (Soundbar) | DC 18V 2A |
| Power Supply (Subwoofer) | 100-240V~50/60Hz AC |
| Standby Power | <0.5W (deactivated wireless connections) |
| Networked Standby | <2.0W |
| USB Output | 5V 500mA |
| Operating Temperature | -10°C to 45°C (14°F to 113°F) |
| Operating Altitude | 2000 meters above sea level |
| Wall Mount Screws | 4 x 35 mm / 0.2" x 7.4 |
| Bracket Screws Diameter | 3 mm / 0.01" |
| Remote Control Battery Type | 2 x AAA (NOT INCLUDED) |
| Soundbar Dimensions (W x H x D) | 600 x 70 x 90 mm / 23.6" x 2.8" x 3.5" |
| Subwoofer Dimensions (W x H x D) | 300 x 200 x 150 mm / 11.8" x 7.9" x 5.9" |
| Packaging Dimensions (W x H x D) | 335 x 437 x 197 mm / 13.2" x 17.2" x 7.8" |
| Packaging Weight | 5.8 kg / 12.8 lbs |

Dimensions of the soundbar and wireless subwoofer.
7. Maintenance
To ensure the longevity and optimal performance of your ULTIMEA Poseidon R3T Soundbar, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the surfaces of the soundbar and subwoofer. Do not use liquid cleaners, abrasive cleaning agents, or solvents, as these can damage the finish or internal components.
- Ventilation: Ensure that the ventilation openings are not blocked by any objects (e.g., newspapers, curtains). Proper airflow is essential to prevent overheating.
- Placement: Avoid placing the soundbar or subwoofer near heat sources such as radiators, stoves, or amplifiers. Keep them away from direct sunlight and damp environments.
- Cable Management: Protect power cords from being pinched, stepped on, or bent. Regularly check cables for any signs of wear or damage.
- Storage: If the device will be unused for an extended period, unplug it from the power outlet and store it in a cool, dry place.
8. Troubleshooting
If you encounter any issues with your soundbar, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; Power outlet not working | Ensure power cables are securely connected to both the soundbar/subwoofer and a working power outlet. |
| No sound | Incorrect input selected; Volume too low; Cables not connected properly | Select the correct input source (HDMI, Optical, Bluetooth, USB). Increase the volume. Check all audio cables for secure connections. |
| Subwoofer not pairing | Subwoofer disconnected | Follow the subwoofer pairing instructions in Section 4.2. |
| Bluetooth not connecting | Soundbar not in pairing mode; Device too far | Ensure the soundbar is in Bluetooth pairing mode (indicator flashing). Keep your device within 10m/33ft of the soundbar. Disconnect and reconnect Bluetooth. |
| Remote control not working | Batteries low/incorrectly inserted; Obstruction between remote and soundbar | Replace batteries (2x AAA, not included). Ensure there is no obstruction between the remote and the soundbar's sensor. |
| Sound distortion | Volume too high; Poor audio source quality | Reduce volume. Try a different audio source or input. |
9. User Tips
- For the best audio experience, use the HDMI (ARC) connection if your TV supports it, as it often provides better sound quality and allows for TV remote control integration.
- Experiment with the different EQ presets (Movie, Music, Voice, etc.) to find the optimal sound profile for your content.
- Utilize the Ultimea App for advanced customization, especially the 10-band equalizer, to tailor the sound precisely to your preferences and room acoustics.
- Ensure the wireless subwoofer is placed in a location where its bass can be felt and heard effectively, without being obstructed.
- Keep the soundbar's firmware updated via the Ultimea App's OTA update feature to benefit from the latest improvements and features.
10. Important Safety Instructions
Please read and retain this manual. Follow all warnings and operate according to the instructions.
- Do not use the device near water sources, in damp environments, or in the rain. Avoid splashing liquids or placing objects containing liquids (such as vases) on the device.
- Clean only with a dry cloth. Do not use liquid cleaners.
- Do not block ventilation openings or install the device in an enclosed space. Ensure proper ventilation and install according to the manufacturer's instructions.
- Do not install the device near heat sources such as radiators, stoves, or amplifiers. Do not cover the ventilation openings with items such as newspapers or curtains.
- Use only attachments, stands, or accessories specified by the manufacturer. When using a device with wheels, move with care to avoid tipping.
- Protect the power cord from being pinched, stepped on, or bent, especially at plugs, outlets, and the point where it exits the device.
- Do not alter the polarized or grounding-type plug. If the plug does not fit into the outlet, consult an electrician to replace the outlet.
- Unplug the device during lightning storms or when unused for long periods. To fully disconnect power, unplug the device from the wall outlet and ensure the plug is accessible.
- Do not place any open flame sources (such as lit candles) on or near the device.
- Do not attempt to open the device. High voltage inside may be fatal. There are no user-serviceable parts inside. All servicing must be performed by qualified personnel.
- The installation height of the device must not exceed 2 meters.
CA WARNING: Can expose you to BPA, a carcinogen, and BPA, a reproductive toxicant. See www.P65Warnings.ca.gov.
11. Regulatory Compliance
Proper Disposal Instructions
This mark shown on the product or its packaging indicates that this product should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Wireless Frequency Range and Output Power
Frequency: 2.402GHz-2.48GHz
The Max. transmit power (Applies only to the EU): 10 dBm
FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISED Warnings
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
CE Warnings
- Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
- WARNING: The adapter plug is used as disconnect device, the disconnect device shall remain readily operable.
- Frequency: 2.402GHz-2.48GHz
- The Max. transmit power: 10 dBm
12. Warranty and Support
For warranty information and technical support, please contact ULTIMEA customer service:
- US Support: +1 888-598-8875 (Mon-Fri 9am-5pm PST)
- EU Support: +49 89-628-25828 (Mon-Fri 9am-5pm CET)
- Email: support@ultimea.com
- Website: support.ultimea.com
You can also download the Ultimea App for additional support and product information.

Scan to download the Ultimea App.