coolo Zigbee Button Scene Switch

Contents

User Manual

coolo Zigbee Smart Push Button Wireless Scene Switch

Model: Zigbee Button Scene Switch

1. Introduction

The coolo Zigbee Smart Push Button is a versatile wireless scene switch designed to trigger smart home automations without the need for complex rewiring. This compact device allows you to control various smart devices and activate predefined scenarios with simple presses. It integrates seamlessly with the Ewelink app and is compatible with other Zigbee platforms like Home Assistant and Zigbee2MQTT.

Zigbee Button Switch - Trigger smart scenes wirelessly, no rewiring needed. Shows single and double press actions, works with Ewelink APP and 2MQTT, requires Zigbee Gateway.
The coolo Zigbee Smart Push Button, highlighting its wireless scene triggering capabilities and compatibility.

2. Important Notes

  • A Zigbee Gateway is Required: This device operates on the Zigbee protocol and requires a compatible Zigbee gateway (hub) to function. The gateway is NOT included in the package.
  • Ewelink App Support ONLY: This button is designed to work with the Ewelink app.
  • NOT Compatible with Smart Life/Tuya App: This device does NOT support the Smart Life or Tuya applications.

3. Package Contents

Please check the package for the following items:

  • 1 x Zigbee Smart Push Button (sensor)
  • 1 x User Manual

4. Specifications

Product parameters table showing power supply (CR2032 3V DC), communication (Zigbee 3.0), control distance (25m open area), dimensions (50mmx50mm), operating temperature (-10°C~45°C), working humidity (<90%RH), and battery life (1 year).
Detailed product parameters for the Zigbee Smart Push Button.
Technical Data
Feature Description
Brand Name coolo
Model Number Zigbee Button Scene Switch (ZG-1012L/ZG-1012E)
Communication Method Zigbee 3.0*
Power Supply Battery CR2032 3V DC (battery included)
Control Distance 25m (open area)
Dimensions 50mm x 50mm
Operating Temperature -10°C ~ 45°C
Working Humidity <90%RH
Battery Life 1 year (General use)
Certifications CE, FCC, RoHS
EU LVD Voltage Compliance Below 50Vac or 75Vdc
Supported Platforms Ewelink app, ZHA (Zigbee Home Automation), Zigbee2MQTT
Unsupported Platforms Smart Life/Tuya app

5. Setup

5.1 Prerequisites

  • A compatible Zigbee Gateway (e.g., Ewelink Zigbee hub for Ewelink app, or a Zigbee coordinator for Home Assistant/Zigbee2MQTT).
  • The Ewelink app installed on your smartphone (if using Ewelink).

Follow these steps to pair your Zigbee Smart Push Button with the Ewelink app:

  1. Ensure your Ewelink Zigbee hub is powered on and added to your Ewelink app.
  2. Open the Ewelink app and navigate to your Zigbee hub.
  3. Initiate the device pairing mode within the Ewelink app for your Zigbee hub.
  4. On the Zigbee Smart Push Button, long press the button for approximately 6 seconds until the indicator light begins flashing rapidly. This indicates it's in pairing mode.
  5. The app should detect and add the button under your Zigbee hub. Once successfully added, the indicator light will stop flashing.
Video demonstrating the pairing process of the Zigbee Smart Push Button with the Ewelink app and Zigbee hub.
Diagram illustrating the need for a Zigbee Gateway to connect the button to a WiFi router and the Ewelink APP for control. Explicitly states 'Not support smart life/tuya app'.
The Zigbee Smart Push Button requires a Zigbee Gateway to connect to your smart home network.

5.3 Physical Installation

The coolo Zigbee Smart Push Button features adhesive installation, allowing for flexible placement without any wiring. Simply choose a desired location, peel off the adhesive backing, and firmly press the button onto the surface.

Image highlighting the small size and adhesive installation of the button, showing it being held lightly.
The compact design and adhesive backing allow for easy, no-wiring installation.

6. Operation

The Zigbee Smart Push Button supports multiple press actions, each configurable to trigger different smart scenes or control devices.

6.1 Button Actions

  • Single Press: Typically used for simple on/off toggles or activating a specific scene.
  • Double Press: Can be configured for a different action, such as an 'away mode' or a different lighting scene.
  • Long Press (>3s): Ideal for more significant actions like turning off multiple devices or activating a security mode.
Ewelink app screenshot showing action selection for single click, double click, and long press, demonstrating scenario mode setup.
Configure different actions for single, double, and long presses within your smart home app.

6.2 Scenario Examples

  • Single Press: Power ON/OFF a Zigbee bulb.
  • Double Press: Activate 'away mode' to turn off all lights, air conditioners, fans, and other electronic devices before leaving.
  • Long Press: Dim lights, change color temperature, or activate a 'movie night' scene.
Example of single press to power ON a Zigbee bulb under remote mode using the Ewelink app.
Single press to control a Zigbee bulb.
Example of double click for 'away mode' to turn off lights, AC, fans, and other electronic devices.
Double click to activate 'away mode' and turn off multiple devices.
Diagram showing a smart home setup with various devices (Smart Plug, Smart Switch, Smart Knob, Traditional Bulb, Fan, Smart Curtain, AC) controlled from anywhere.
Integrate the button into your smart home ecosystem to control various appliances.

7. Maintenance

7.1 Battery Replacement

The device is powered by a CR2032 3V DC battery, which typically lasts for about 1 year under general use. When the battery is low, the device may become unresponsive or lose connection. To replace the battery:

  1. Gently twist or pry open the back cover of the button.
  2. Remove the old CR2032 battery.
  3. Insert a new CR2032 battery with the positive (+) side facing up.
  4. Close the back cover securely.

7.2 Cleaning

To clean the device, wipe it with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the device.

8. Troubleshooting

  • Device not pairing or losing connection:
    • Ensure your Zigbee gateway is powered on and within range (control distance is 25m in open area).
    • Check the battery level and replace the CR2032 battery if necessary.
    • Try re-pairing the device by long-pressing the button for 6 seconds until the indicator flashes rapidly, then re-add it through your app/platform.
  • Button presses not triggering actions in Home Assistant/Zigbee2MQTT:
    • Verify that the device is correctly recognized by your Zigbee integration (e.g., ZHA, Zigbee2MQTT).
    • Ensure that automations or rules are correctly configured for single, double, and long press events. Some integrations might require specific drivers or configurations to expose all three actions.
    • If initial connection with Zigbee2MQTT fails or it's identified as incompatible, try removing and re-adding the device.
  • Device not working with Smart Life/Tuya app:
    • This device is explicitly stated to NOT support Smart Life/Tuya apps. Please use the Ewelink app or other compatible Zigbee platforms like Home Assistant or Zigbee2MQTT.
  • Button triggers on its own:
    • This could indicate interference or a faulty unit. Try moving the button closer to the Zigbee gateway or away from other wireless devices. If the issue persists, contact support.

9. User Tips

  • For Home Assistant users, this button integrates easily with ZHA and Zigbee2MQTT, providing single click, double click, and long press events for custom automations.
  • When integrating with Samsung SmartThings, you may need to find and install the appropriate Edge driver for the switch to be recognized correctly and register all button events.
  • Consider purchasing multiple buttons for different rooms or scenarios, as they are cost-effective and highly functional for scene switching.

10. Warranty & Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller or refer to the product listing for specific support information.

11. Additional Resources

A PDF user manual for a related Zigbee 3.0 USB Dongle is available, which may provide general information about Zigbee devices and firmware. Please note that this PDF is for a different product (a USB dongle/coordinator) and not specifically for this button, but can be accessed here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.