UXCELL 2E1955985

Contents

UXCELL Windshield Washer Nozzle Instruction Manual

Model: 2E1955985

1. Product Overview

This manual provides instructions for the installation, operation, and maintenance of the UXCELL Front Windshield Washer Nozzles, designed as a replacement part for specific vehicle models.

Description

The replacement windshield washer check valve is made of durable plastic and built to meet original factory specifications. It is a non-OEM accessory designed to maintain proper washer fluid flow for your vehicle's wiper system.

Function

The nozzle controls one-way fluid flow in the windshield washer system, preventing backflow. This ensures a consistent, reliable spray from the washer nozzles, keeping your windshield clean for clear driving visibility.

Application

This product fits most standard vehicle windshield washer systems, serving as a replacement for worn, damaged, or clogged original check valves to restore optimal washer system performance.

Two black windshield washer nozzles with a white van in the background and a close-up of a spray pattern on a windshield.
Image 1.1: UXCELL Windshield Washer Nozzles and their application.

2. Safety Information

  • This product is intended for automotive windshield washer system use only. Do not use it for other applications.
  • Confirm the correct flow direction during installation to prevent system malfunction.
  • Disconnect power to the vehicle's electrical system before installation to prevent injury.
  • This is a non-OEM accessory and should not be used in safety-critical systems beyond its intended purpose.
  • Regularly inspect the nozzles for leaks or damage. Replace immediately if any faults are found.
  • This product complies with EU General Product Safety Regulation (GPSR) 2023/988, ensuring safety for intended use in automotive accessory applications.

3. Specifications

Feature Detail
Condition Brand New
Replacement Part Number 2E1955985
Placement on Vehicle Front
Material Plastic
Color Black
Size (L*W*H) 17x6x20mm / 0.67"x0.24"x0.79"
Nozzle Hole Outer Diameter 4mm / 0.16"
Nozzle Hole Inner Diameter 2.5mm / 0.1"
Package Includes 2 x Windshield Washer Nozzles

Fitment

  • For Mercedes-Benz Sprinter 3500 (2016-2018)
  • For Volkswagen Crafter (2017-2018)
  • For Mercedes-Benz Sprinter (2016-2018)
  • For Mercedes-Benz Sprinter 2500 (2016-2018)
Detailed diagram showing the dimensions of the windshield washer nozzle, including length, and inner and outer diameters of the nozzle hole.
Image 3.1: Windshield Washer Nozzle Dimensions.

4. Installation (Setup)

Follow these steps to install the windshield washer nozzles:

  1. Locate the existing check valve: Identify the current check valve in the washer fluid line of your vehicle.
  2. Disconnect the old valve: Carefully disconnect the old valve from the hose.
  3. Align the new valve: Align the new nozzle with the correct fluid flow direction. Ensure it is oriented properly for effective spray.
  4. Secure the valve: Firmly press and snap the new valve into the hose to secure it in place.
  5. Test the system: After installation, test the washer system to confirm proper operation and spray pattern.

Important: Remember to disconnect power before installation and confirm correct flow direction to avoid system malfunction.

5. Operation

Once correctly installed, the windshield washer nozzles operate automatically as part of your vehicle's existing wiper system. When the windshield washer function is activated, the nozzles will spray washer fluid onto the windshield, ensuring clear visibility.

6. Maintenance

  • Regular Inspection: Periodically inspect the nozzles for any signs of leaks, cracks, or damage.
  • Clear Blockages: Ensure the nozzle holes are free from debris, dirt, or wax buildup that could obstruct the spray. If clogged, gently clear with a thin pin or compressed air.
  • Prompt Replacement: If a nozzle is found to be faulty, damaged, or leaking, replace it immediately to maintain effective windshield cleaning.

7. Troubleshooting

Common Issues and Solutions:

  • No Spray or Weak Spray:
    • Check if the washer fluid reservoir is empty.
    • Inspect the nozzles for blockages (debris, ice).
    • Verify that the washer pump is functioning.
    • Ensure hoses are securely connected and not kinked or leaking.
  • Inconsistent Spray Pattern:
    • Check for partial blockages in the nozzle holes.
    • Ensure the nozzle is correctly aligned and seated.
  • Leaking Nozzles:
    • Inspect the connection points for proper sealing.
    • If the nozzle itself is cracked or damaged, it requires replacement.

8. User Tips

  • Winter Care: In cold climates, use winter-formula washer fluid to prevent freezing and ensure consistent spray.
  • Fluid Quality: Use high-quality windshield washer fluid to prevent mineral buildup and clogs in the nozzles and lines.
  • Regular Checks: Make it a habit to check your washer fluid level and the condition of your nozzles during routine vehicle maintenance.

9. Warranty and Support

As a non-OEM accessory, specific warranty details may vary. Please refer to the seller's terms and conditions for information regarding returns, refunds, or replacements.

For further assistance or detailed information, you may consult the official user manual (PDF) provided by the seller, which can be accessed here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.