FEELWORLD FRM701G

Contents

FEELWORLD FRM701G Dual 7" 3RU Rackmount Monitor User Manual

Model: FRM701G

Introduction

Thank you for purchasing the FEELWORLD FRM701G Dual 7-inch Rack-mount monitor. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read it carefully before use to ensure a great experience and to prevent any damage.

The FRM701G is a professional dual 7-inch 3RU rackmount monitor designed for broadcast quality monitoring. It features two independent 7-inch high-resolution 1920x1200 IPS panels, supporting 4K@60Hz input and loop out via 12G-SDI and HDMI 2.0. Its compact design makes it ideal for installation in equipment racks and monitor walls in broadcasting, post-production, on-set monitoring, flight case systems, and OB vans.

FEELWORLD FRM701G Dual 7 inch 3RU Rackmount Monitor with accessories

Figure 1: FEELWORLD FRM701G Dual 7" 3RU Rackmount Monitor and included accessories.

Safety Cautions

  • Avoid dropping the device, as this may cause damage.
  • The screen is made of glass; handle with care to prevent injury if broken.
  • Keep the product away from heat sources and direct prolonged sunlight exposure, which can damage the LCD screen.
  • Do not attempt to disassemble or repair the unit yourself. There are no user-adjustable components inside.
  • To protect the screen and housing:
    • Refrain from using hard objects to hit the screen.
    • Do not force or rub the screen or housing excessively.
    • Do not use chemical solutions for cleaning.
    • Do not spray detergent directly onto the screen or housing.
    • Do not write on the screen.
    • Do not stick anything on the screen or housing.
    • Wipe with a clean, soft cloth only, ensuring no water remains on the screen or housing.

Product Overview

Key Features

  • Dual 7-inch full HD 1920x1200 IPS displays.
  • 4RU rack mount design, suitable for news production, post-production, broadcasting trucks, special vehicles, and video surveillance.
  • Flexible and intuitive button operation with a new iconized menu interface.
  • Accurate full waveform analysis and monitoring (Waveform, Vector, Histogram, False Color, Monochrome, etc.).
  • Supports 3D LUT Log to REC.709 conversion and user 3D LUT upload (up to 32).
  • Front panel stereo earphone output.
  • Equipped with HDMI, SDI (optional), CVBS inputs and outputs.
  • Remote control of monitor menu and functions via Ethernet connection.
  • 12G-SDI single link technology compatible with 6G-SDI/3G-SDI/HD-SDI/SD-SDI, supporting 12Gbps transmission rate.
  • Compact 3RU rackmount design with a thickness of only 30.5mm.
  • 3-Color Tally Indicator (Green, Red, Yellow) for Preview, On Air, and Record status.
  • Supports up to 11 languages.

Front Panel Features

Front panel diagram of FEELWORLD FRM701G

Figure 2: Front Panel Layout

No. Icon/Label Description
1/Tally indicator
2⏻Standby power on/off key
3F2Custom function shortcut button
4F1/↶Custom function shortcut button; Menu return
5∧/∨+Previous item selection/parameters increasing; Volume increasing adjustment when menu without display
6∨-Next item selection/parameters decreasing; Volume decrease adjustment when menu without display
7MENUMain menu, enter/confirm
8MODEInput signal selection and confirm
9🎧Earphone jack port

Rear Panel Features

Rear panel diagram of FEELWORLD FRM701G with input/output ports

Figure 3: Rear Panel Layout with Input/Output Ports

No. Port Description
1DC 12VDC 12V Power Input
24-pin XLR4-pin XLR DC12V power input
33G/SDI IN/OUTIN (SDI serial data input) / OUT (SDI serial data output) (optional)
4CVBS IN/OUTIN (Composite video broadcast signal input) / OUT (Composite video broadcast signal output)
5AUDIO L/RL (Audio signal left stereo input) / R (Audio signal right stereo input)
6HDMI IN/OUTIN (High definition multimedia interface input) / OUT (High definition multimedia interface output)
7USBFirmware update, LUT file importing port
8LAN INEthernet LAN Connector
9TALLYTALLY indicator input port

Setup

Power Input

The monitor can be powered in two ways:

  1. Direct Plug-in DC Power Input: Use a DC5.5*2.1mm DC power plug. Ensure the power input polarity is correct as shown in Figure 4. Use a qualified power supply with an output of no less than 24W DC 9-24V.
  2. DC 12V power input and 4-pin XLR connector

    Figure 4: Power Input Options (DC 12V and 4-pin XLR)

  3. 4-pin XLR Interface Power Supply: The polarity of the 4-pin XLR power input is crucial. Refer to the table below for correct pin assignments. Incorrect polarity may damage the monitor.
Pin number Signal
1GND
2No connection
3No connection
4+12V

TALLY Indicator Connection

The TALLY indicator connects via a DB9 interface on the rear panel. The pin connections for each screen's TALLY color are as follows:

Tally indicator connection diagram

Figure 5: TALLY Indicator Connection

Indicator Color 1 Screen Pin Connection 2 Screen Pin Connection
Green1-53-8
Red6-54-8
Yellow9-57-8

Note: GND port 5 and 8 are shared.

Ethernet Connection and Remote Control

The monitor is equipped with an Ethernet interface for remote control via a PC. This allows users to control the monitor and send commands to specific monitors.

  1. Connect the LAN port on the back of the monitor to your network. The monitor will display the same IP address as the connected device.
  2. Ethernet connection diagram with monitor, router, and PC

    Figure 6: Ethernet Connection Setup

  3. Download the control software from the details page of D101PLUS or D101PLUS-H on www.feelworld.cn.
  4. After downloading, open the file and double-click "feelworld.exe".
  5. Log in to the software using the default username "admin" and password "123456".
  6. After logging in, click "Add monitor" and enter the IP address displayed on the monitor.
  7. Click "Connect" after entering the IP address. Select the controlled monitor (number 0 for the left monitor, number 1 for the right monitor).
  8. Check the "Connection Status". If connected, the IP address will be displayed (e.g., "connect: 192.168.2.235").
  9. You can now use the control bar to adjust parameters and functions.

Note: The control software is currently suitable for Windows operating systems.

Operation

Menu Function Introduction

The monitor features a comprehensive menu system accessible via the front panel buttons or remote control software. Below are the main functions:

Functional Assist

Function Description
All WavesTurns on waveform, vector, histogram, and embedded audio displays simultaneously.
WaveformDisplays overall brightness and evenness of lighting. Modes: RGB, YUV, Y. Waveform Trans: Off, 25%, 50%, 75%.
VectorShows image saturation and pixel distribution on the color spectrum.
HistogramDisplays brightness distribution. Modes: RGB1, RGB2, Y.
Focus AssistHighlights in-focus areas. Color options: Red, Green, Blue. Peaking Level: 1-10.
Embedded AudioAudio level meters with numerical indicators. Green for normal, yellow for >-20dB, red for >-9dB.
Over ExposureHighlights overexposed areas. Exposure Level: 10-100.
Check FieldEliminates color interference, aids in exposure, focus, contrast. Modes: Red, Green, Blue, Mono.
False ColorsExposure assist tool showing brightness values as different colors.
Time Code (SDI only)Displays LTC and VITC time codes for synchronization and frame identification.
Accurate waveform monitoring display

Figure 7: Accurate Waveform Monitoring

Waveform, Vectorscope, Histogram, YUV Parade, Y Parade examples

Figure 8: Waveform, Vectorscope, Histogram, YUV Parade, Y Parade examples

Mark Functions

Function Description
Nine GridDivides the screen into nine equal sections. Color options: Red, Green, Blue, Black, White, Gray.
Safe FramesDisplays safe area markers (80%, 85%, 90%, 93%, 96%, 2.35:1). Color options: Red, Green, Blue, Black, White, Gray.
Center MarkerDisplays a crosshair in the center of the screen. Color options: Red, Green, Blue, Black, White, Gray.
Ratio MarkerDisplays various aspect ratio markers (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1). Color options: Red, Green, Blue, Black, White, Gray. Modified Mark: 0-5.

Display Settings

Function Description
Scan ModeUnder Scan, Over Scan.
Aspect RatioAuto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen.
AnamorphicModes: 1.33X, 1.6X, 2.0X, 2.0X MAG, User (customizable 1.20X-2.00X).
Image FlipOn, Off. Modes: H Flip, V Flip, H_V Flip.
Zoom ModeModes: 2X, 4X, 9X, 16X, User.
Image FreezeOn, Off. Customizable (100%-200%).
P2POn, Off.

User Settings

Function Description
LUTWhen LUT Switch is on, use Lut (SLOG2, SLOG3, LOGC, VLOG). Supports importing up to 32 custom 3D LUT files from a USB flash drive (USB-C to USB-A adapter required).
Display AdjustmentAdjust Backlight (0-100), Brightness (0-100), Contrast (0-100), Saturation (0-100), Tint (0-100).
Color AdjustmentColor Temp.: 5600K, 6500K, 9300K, User. Adjust Red, Green, Blue (0-255) under User mode.
USB-C to USB-A adapter for LUT import

Figure 9: USB-C to USB-A adapter for LUT import

System Settings

Function Description
LanguageSelect from English, Simplified Chinese, Spanish, Portuguese, French, Dutch, German, Japanese, Traditional Chinese, Korean, Russian.
OSD OptionOSD Time: Off, 15Sec, 30Sec, 45Sec. OSD Trans: Off, 25%, 50%, 75%. No Signal: Red, Green, Blue, Black, White, Gray.
VolumeOn, Off. Adjustment range: 0-100.
ResetScroll the wheel to select Reset and press Confirm to restore system to original settings.
Monitor menu showing language options

Figure 10: Language Selection Menu

Firmware Update

To update the firmware:

  1. Copy the upgrade file to a USB flash drive.
  2. Insert the USB flash drive into the monitor using a USB adapter cable (USB-female to mini-USB).
  3. Press the "MENU" wheel button and select "Confirm" to start the update.

The monitor will automatically restart after the upgrade is complete.

Specifications

Supported Signal Formats

Signal Type Supported Formats
VideoPAL/NTSC auto recognize, 480i/576i/480p/576p
HDMI720p (60/59.94/50/30/29.97/25/24/23.98), 1080i (60/59.94/50), 1080p (60/59.94/50/30/29.97/25/24/23.98), 3840×2160p (60/50/30/29.97/25/24/23.98), 4096×2160p (60/50/30/29.97/25/24/23.98)
SDI720p (60/59.94/50/30/29/25/24/23.98), 1080i (60/59.94/50), 1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)

General Parameters

Parameter Value
Panel Size10.1" IPS LCD×2
Resolution1920 × 1200 pixels
Dot Pitch0.1128(H)×0.1128(V)mm
Aspect Ratio16:10
Brightness500 cd/m²
Contrast1500:1
Viewing Angle80°/80°(L/R) 80°/80°(U/D)
BacklightLED
Input VoltageDC 9~24V
Power Consumption≤ 24 W
Special FunctionTALLY indicator
Working Temperature-10°C~60°C
Storage Temperature-30°C~70°C
Unit Size482×177×25 mm
Unit Weight≈2048g
Dimensions of the FRM701G monitor

Figure 11: Monitor Dimensions

Troubleshooting

If you encounter any problems while using the unit, please refer to the following table for inspection and solutions. If the issue persists, please contact our technical support.

No Image Display

Problem Solution
Video cable off or connected incorrectlyCheck the quality of the cable, ensure correct input interface.
Monitor not powered onCheck power connection, press power button to confirm.
Supply voltage instabilityEnsure power adapter plug is securely connected to the socket.
Self-contained power supply, polarity connected inverselyReference "Power Input Way" section and reconnect with correct polarity.
Without video signal inputCheck the signal source and output interface connection.

Image/Color Display Abnormal

Problem Solution
Video cable poor contactChange the video cable, try again.
Video signal interfered by external environmentMove to another environment to try again.
Video input signal amplitude too lowCheck signal source video output, or change signal source and try.
Menu color saturation adjustment closingEnter menu to check color, or reset to factory settings.
Check Field set in mono or black & whiteReset Check Field, return to color display.
Image deformationReset the image ratio.

Earphone Without Sound

Problem Solution
Audio cable off or connection properlyConfirm connected with the corresponding input port.
Volume adjustment was closedReset the volume control and adjust to a proper position.
HDMI cable poor connectionCheck the quality of cable, or change cable and try.
No sound after switch video signalCheck whether there is an AUDIO signal input in AV Mode.

Warranty and Support

For any issues not covered in this troubleshooting guide, or for further technical assistance, please contact FEELWORLD customer support or your authorized dealer. Please note that specifications and features are subject to change without prior notice.

A user manual in PDF format is available for download from the official FEELWORLD website: User Manual (PDF).

© 2023 FEELWORLD. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.