1. Introduction and Features
Thank you for choosing the SHOVIA H4 Bi LED Projector Headlight Bulbs. This product is designed to provide superior illumination for your car or motorcycle, offering enhanced brightness, a precise beam pattern, and easy installation. Please read this manual carefully before installation and use to ensure optimal performance and safety.
Key Features:
- Size: H4
- Installation: 3-minute quick installation, plug and play, non-destructive upgrade.
- CANBUS: Built-in CANBUS technology to eliminate error messages.
- Cooling System: Hydraulic industrial fan with 12,000 RPM for efficient heat dissipation.
- LED Chips: Top automotive-grade CSP LED chips, providing up to 8 times brighter light than halogen lamps.
- Wattage: 800W (per pair, please verify actual per bulb if needed).
- Luminous Flux: 1,000,000LM, offering super brightness (+800% brighter than halogen) with a perfect beam pattern, no dark spots or foggy light.
- Voltage: DC 12V-24V (compatible with both 12V and 24V vehicles).
- Color Temperature: 6000K for a comfortable visual effect.
- Safety: Sharp cut-off line to prevent glare for oncoming traffic, enhancing driving safety.
- Operating Temperature: -45°C to 150°C.
- Lifespan: Over 50,000 hours for the LED source.
- Material: Housing made of aviation-grade 6063 aluminum alloy.
- Waterproof Rating: IP68, ensuring reliable operation in various weather conditions.
- Application: Suitable for car headlights and fog lights.
2. Safety Information
- Always ensure the vehicle's engine is off and the battery is disconnected before beginning installation.
- Wear appropriate safety gear, such as gloves and eye protection, during installation.
- Avoid touching the LED chips directly, as oils from your skin can reduce their lifespan.
- Ensure all connections are secure to prevent electrical shorts.
- If you are unsure about any part of the installation process, consult a qualified automotive technician.
3. Package Contents
- 2 x SHOVIA H4 Bi LED Projector Headlight Bulbs
4. Setup and Installation
The SHOVIA H4 Bi LED bulbs are designed for plug-and-play installation, making the upgrade process straightforward. Refer to the diagrams and video below for visual guidance.
Compatibility Check:
Before installation, ensure your vehicle's headlight housing is suitable. Some original car models without a lens, with a hood that obstructs access, or with an existing lens that requires disassembly may not be directly compatible or may require additional modifications.

Figure 1: Headlight housing compatibility guide. Ensure sufficient space and proper housing type.
Installation Steps:
The installation process is non-destructive and designed to be quick and easy.

Figure 2: Detailed installation steps from the instruction manual.
- Step 1: Open the Dust Cover. Locate and open the dust cover of your vehicle's headlight assembly.
- Step 2: Unplug Power and Remove Halogen Bulb. Disconnect the power cord from the existing halogen bulb and carefully remove the halogen bulb from its socket.
- Step 3: Replace the Light. Insert the new SHOVIA H4 Bi LED bulb into the headlight socket.
- Step 4: Fasten the Metal Spring. Secure the LED bulb in place by fastening the metal spring or retaining clip, ensuring it is firmly seated.
- Step 5: Fine-tuning (Optional). The screws on the accessory kits can be tightened for high beam and low beam fine-tuning. This allows for precise adjustment of the beam pattern.
- Step 6: Adjust Light Pattern (Optional). The overall light pattern can be adjusted left and right by tightening the screws in the accessory kit.

Figure 3: Visual comparison of halogen vs. LED and simplified installation steps.
Video 1: Product demonstration, waterproof test, and installation overview.
5. Operating Instructions
The SHOVIA H4 Bi LED bulbs feature integrated high and low beam functions, controlled by your vehicle's standard headlight switch.

Figure 4: Illustration of low beam and high beam light patterns.
- Low Beam: Provides a focused, wide beam with a sharp cut-off line to illuminate the road ahead without blinding oncoming drivers. This is achieved by the 3570 LED SMD chips.
- High Beam: Activates additional illumination for maximum visibility, extending the light throw for driving at higher speeds or in very dark conditions. This is achieved by the 1860 LED SMD chips working in conjunction with the low beam.

Figure 5: Example of low beam and high beam illumination on a road.
6. Maintenance
- Cleaning: Periodically clean the headlight lenses of your vehicle to ensure maximum light output. Use a soft cloth and appropriate automotive cleaning solutions.
- Inspection: Occasionally check the connections to the LED bulbs to ensure they remain secure.
- No User-Serviceable Parts: The LED bulbs themselves do not contain user-serviceable parts. Do not attempt to disassemble the bulbs.
7. Troubleshooting
- Bulb Not Lighting Up:
- Check the electrical connection to the bulb. Ensure it is fully seated and secure.
- Verify that the vehicle's headlight fuse is not blown.
- Ensure the vehicle's battery has sufficient charge.
- Flickering or Intermittent Light:
- Check for loose connections at the bulb or vehicle wiring harness.
- While the product has CANBUS, some sensitive vehicles might still require an additional decoder.
- Error Message on Dashboard:
- Although designed with CANBUS, if an error persists, an external CANBUS decoder might be necessary for your specific vehicle model.
- Poor Light Output or Beam Pattern:
- Ensure the bulb is correctly oriented and fully seated in the headlight housing.
- Check if the headlight lens is clean and free from obstructions.
- Adjust the beam pattern using the fine-tuning screws as described in the installation section.
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | SHOVIA |
| Item Type | Other (H4 Bi LED Projector Lenses Headlight) |
| Sockets | H4 Bi LED Projector Lenses Headlight |
| Wattage | 800W |
| Color Temperature | 6000K |
| Voltage | 12 V (Compatible with 12V-24V DC) |
| CANBUS | CANBUS No Error |
| Application | Car and Motorcycle, Headlamp and Fog lights |
| Certification | CE |
| Origin | Mainland China |
| Warranty | 1 Year |
9. User Tips
- Users have reported excellent brightness and value for the price.
- One user measured power consumption at approximately 40W for low beam and 50W for high beam at 12.55V, indicating strong performance.
- Ensure proper alignment after installation to maximize the effectiveness of the beam pattern and avoid dazzling other drivers.
10. Warranty and Support
This SHOVIA H4 Bi LED Projector Headlight Bulb comes with a 1-Year Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For any support inquiries, technical assistance, or warranty claims, please contact your retailer or the manufacturer directly through their official channels.