1. Product Introduction
The Electric Stacker is a material handling equipment designed for lifting, stacking, and transporting palletized goods in warehouses, factories, and distribution centers. It combines a hydraulic lifting system with a sturdy mast and forks, offering efficient and safe operation for loads up to 1500kg. Powered by a maintenance-free battery, it provides clean, quiet, and powerful performance for indoor use.
This versatile and efficient material handling solution is ideal for various environments, significantly reducing manual labor, improving operational efficiency, and ensuring workplace safety. With load capacities up to 1500kg and lifting heights up to 3000mm, it delivers quiet, zero-emission performance suitable for indoor use.
Video: Electric Stacker in operation, demonstrating loading and unloading from a truck.
2. Key Features
- Electric Lifting and Walking: Reduces operator fatigue and improves efficiency. The operator controls forward, reverse, lifting, and lowering with minimal effort, increasing productivity by up to 50% compared to manual alternatives.
- High-Strength Mast Design: Made of robust, thickened C-channel steel with a reinforced cross-section for stability and durability, even at full lifting height. The industrial-grade lifting chain includes an automatic lubrication system for smooth operation and long service life.
- Adjustable Fork Width: Forks can be manually adjusted from 330mm to 680mm to accommodate various pallet sizes, including European standard, American, and custom sizes.
- Built-in Smart Charger: Easy charging with any standard 220V outlet. The high-frequency charger automatically detects battery status and adjusts parameters to prevent overcharging. A full charge takes 6-8 hours, with LED indicators showing progress.
- Safety Protection Features:
- Emergency reverse button – Located on the tiller handle, instantly reverses the machine to prevent accidents.
- Automatic brake – Engages when the operator releases the tiller arm, applying the brake and cutting drive power.
- Low voltage cut-off – Prevents battery over-discharge, extending battery life.
- Overload protection – The hydraulic system automatically stops lifting if the load exceeds the rated capacity.
- Slow start and soft stop – Ensures smooth acceleration and deceleration, protecting the load from sudden movements.
- Polyurethane Wheels: Drive and load wheels are made of high-quality, non-marking, oil-resistant, and quiet polyurethane. They provide excellent traction on various floor surfaces (concrete, epoxy, tile) without leaving marks or causing damage.
- Ergonomic Tiller Arm: Height-adjustable with a comfortable grip and integrated, logically arranged controls for intuitive operation. Includes a built-in shock absorber to reduce vibration.
- Compact and Maneuverable: A tight turning radius of 1350mm allows easy navigation in narrow aisles, crowded storage areas, retail backrooms, and elevators.
- Low Maintenance: Features a brushless drive motor requiring no periodic maintenance. The sealed, pre-filled hydraulic system eliminates frequent oil top-ups. Lead-acid models require battery watering every 2-3 months, while lithium-ion options are maintenance-free.
- Optional Lithium Battery: Available for longer runtime and faster charging. Lithium batteries offer up to 2000 charge cycles (vs. 500 for lead-acid), charge in 2-3 hours, are 50% lighter, and include a built-in Battery Management System (BMS) for safety.
Image: Detailed view of the Electric Stacker highlighting key components and premium quality materials.
Image: Close-up of the thickened load guard for operator safety and the travel control lever.
Image: Thickened steel mast and protective net, illustrating its robust construction and versatility in various scenarios.
Image: Stand-on electric forklift highlighting adjustable forks, reinforced mast, and lift travel capabilities.
Image: Details of the non-slip foldable pedal and durable polyurethane wheel.
Image: Illustration of the stacker's small turning radius for maneuverability in tight areas.
Image: Dual lifting mechanism for versatile use on various surfaces.
Image: Close-up of the thickened chain and manganese steel forks, emphasizing durability and safety.
Image: Overview of premium quality features and benefits.
Image: Diverse applications of the electric stacker in different industrial and commercial settings.
3. Technical Specifications
| Parameter | Specification |
|---|---|
| Model | CD-D10AD(ES) |
| Type | Powered Pallet Truck |
| Load Capacity | 1000kg / 1500kg |
| Lifting Height | 1600mm / 2500mm / 3000mm |
| Fork Length | 1070mm - 1150mm |
| Fork Width (adjustable) | 330mm - 680mm |
| Fork Specifications (L*W*H) | 1220*125*50 |
| Battery Type | Lead Acid Battery, Lead-Acid (12V/80Ah - 120Ah) or Lithium (Optional) |
| Turning Radius | 1350mm - 2240 mm |
| Overall Weight | 350kg - 500kg |
| Drive Type | 4WD |
| Side Shifter | Hydraulic Side Shifter |
| Forklift Tyre | Pneumatic Tire |
| Load Centre Distance | 600 mm |
| Mast Type | Single-Stage Mast |
| Operating Mode | Standing Operation |
| Power Type | DC Power |
| Certification | CE/ISO9001 |
| Condition | New |
| Origin | Mainland China |
4. Safety Instructions
Read the manual before operation. Only trained operators should use the stacker.
- Do not exceed the rated load capacity. Overloading may cause tipping or structural failure.
- Ensure the load is centered and stable on the forks before lifting.
- Keep feet and hands away from the mast and moving parts.
- Do not operate on sloping or uneven ground.
- When not in use, lower the forks fully and engage the parking brake.
5. Initial Setup
Upon receiving your Electric Stacker, perform the following initial setup steps:
- Unpacking: Carefully remove the stacker from its packaging. Inspect for any visible damage during transit.
- Component Check: Verify all components listed in the packing list are present.
- Initial Charge: Connect the built-in charger to a standard 220V outlet. Allow the battery to fully charge before first use (typically 6-8 hours). The LED indicators on the charger will show charging status.
- Fluid Levels: For lead-acid battery models, check the electrolyte levels and top up with distilled water if necessary. The hydraulic system is pre-filled and sealed.
- Pre-Operation Inspection: Before starting, ensure all bolts are tightened, hydraulic hoses are intact, and wheels move freely.
6. Operating Instructions
Before operation, always check battery charge, inspect forks and mast for damage, and ensure wheels move freely.
- Starting the Stacker: Insert the key and turn it to the 'ON' position.
- Adjusting Fork Width: If necessary, manually adjust the fork width to match the pallet size (330mm - 680mm).
- Lifting: Insert forks fully under the pallet. Press the lift button on the tiller arm. Release the button to stop at the desired height.
- Lowering: Press the lower button on the tiller arm to gently lower the load. The lowering speed is controlled automatically.
- Moving: Use the tiller arm to steer. The drive motor provides smooth acceleration and braking. Ensure the path is clear of obstacles.
- Parking: Lower the forks to the lowest position. Turn off the key and remove it. Apply the parking brake.
7. Maintenance
Regular maintenance ensures the longevity and safe operation of your stacker.
- Daily: Clean the stacker. Check for loose bolts or damaged hydraulic hoses.
- Weekly: Inspect wheels and casters for wear. Lubricate all moving joints with oil.
- Monthly: Check battery terminals for corrosion. Top up distilled water (lead-acid batteries only).
- Every 6 months: Change hydraulic oil. Have a professional inspect the mast and lifting chain.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Won't lift | Low battery / Low hydraulic oil | Charge battery / Add hydraulic oil |
| Won't move | Brake engaged / Dead battery | Release brake / Charge battery |
| Unusual noise | Loose parts / Low lubrication | Tighten bolts / Lubricate moving parts |
| Forks drop slowly | Worn seal in cylinder | Replace seal (professional service recommended) |
9. User Tips
No specific user tips were available from reviews or Q&A content for this product at this time.
10. Warranty
The stacker comes with a 12-month warranty covering manufacturing defects in the frame, mast, hydraulic system, and motor. Batteries, wheels, and wear parts are not covered. Damage caused by improper use, overloading, or unauthorized modification voids the warranty.
11. Support
For further assistance, inquiries, or technical support, please contact our sales manager, Amelia, using the details below:
- Email: 3142765351@qq.com
- Whatsapp/WeChat/Mobile: +86 13503818227
- Address: Floor 5th, Block B/C, Jingsha Plaza, No. 8, South Jingguang Road, Zhengzhou, Henan, China
Image: Contact information for sales and support.