1. Product Overview
The SUITU Portable Electric Air Pump is a versatile, wireless air compressor designed for inflating car tires, motorcycle tires, bicycle tires, and various balls. Its compact design and digital display make it convenient for on-the-go use.
Figure 1: SUITU Portable Electric Air Pump
2. Package Contents
Please check the package for the following items:
- SUITU Electric Air Pump Unit
- Inflation Hose with Valve Connector
- USB-C Charging Cable
- Various Nozzle Adapters (for balls, bicycles, etc.)
Figure 2: Air Pump and Accessories
3. Setup and Charging
3.1 Initial Charging
Before first use, fully charge the air pump. Connect the USB-C charging cable to the pump's charging port and plug the other end into a suitable USB power adapter (not included). The battery indicator on the display will show charging status.
3.2 Attaching the Inflation Hose
Screw the inflation hose securely onto the air outlet port of the pump. Ensure it is hand-tight to prevent air leakage during operation.
4. Operating Instructions
4.1 Power On/Off
Long press the power button (
) for 3 seconds to turn the pump on or off.
4.2 Connecting to Item for Inflation
- Select the appropriate nozzle adapter if needed (e.g., for bicycle valves or balls).
- Connect the inflation hose's valve connector to the tire valve or item's inflation port. Ensure a secure connection.
Figure 3: Connecting to a Car Tire
4.3 Setting Inflation Mode and Pressure Units
Short press the Mode/Unit Switching Button (
) to cycle through inflation modes: Car, Motorcycle, Bicycle, and Ball. Long press this button to switch between air pressure units: PSI, BAR, KPA, and KG/CM².
4.4 Setting Target Pressure
Use the '+' and '-' buttons to adjust the desired target tire pressure. The set value will flash for 3 seconds to confirm the setting.
Figure 4: Digital Display and Controls
4.5 Starting and Stopping Inflation
Press the power button (
) to start inflating. The pump will automatically stop once the set target pressure is reached.
Figure 5: Inflation Process
4.6 Using the Built-in Light
The pump features a built-in LED light for illumination in low-light conditions. Press the light button (often integrated with the mode button or a separate button) to turn it on/off.
Figure 6: Built-in LED Light
5. Safety Information and Warnings
- Children are prohibited from using inflatable pumps. Keep out of reach of children.
- When charging, it is prohibited to use the air pump.
- It is prohibited to use air pumps near flammable and explosive liquids and gases, as well as in high-temperature environments.
- After using the inflation pump for 10 minutes each time, it needs to be stopped for 15 minutes to cool down before further use. This prevents overheating and prolongs product life.
- Do not leave the pump unattended while operating.
- Do not point the inflation nozzle at people or animals.
6. Maintenance
6.1 Cleaning
Wipe the exterior of the pump with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the pump is off and disconnected from any power source before cleaning.
6.2 Storage
Store the air pump in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the hose and accessories are neatly stored to prevent damage.
Figure 7: Compact Storage Options in a Vehicle
7. Troubleshooting
7.1 Pump Does Not Turn On
- Ensure the battery is charged. Connect to a charger and try again.
- Long press the power button for 3 seconds to ensure proper power-on sequence.
7.2 Pump Not Inflating
- Check if the inflation hose is securely connected to both the pump and the item being inflated.
- Ensure the correct inflation mode is selected.
- Verify that the target pressure is set above the current pressure.
7.3 Inaccurate Pressure Reading
- Ensure the hose is fully connected to the valve without leaks.
- Calibrate by comparing with a known accurate pressure gauge if possible.
8. Specifications
| Feature | Specification |
|---|---|
| Model | Wireless Car Tire Pump |
| Voltage | 7.4V |
| Dimensions (H x W) | 18 cm (7.09 in) x 9 cm (3.54 in) |
| Package Dimensions (L x W x H) | 19 cm x 10 cm x 7 cm |
| Package Weight | 0.52 kg |
| Pressure Units | PSI, BAR, KPA, KG/CM² |
8.1 Inflation Capacity (Approximate per full charge)
Figure 8: Inflation Capacity Overview
- Car Tires: Supplementing air from 2.0 to 2.5 bar, approximately 12 tires.
- Motorcycle Tires: Supplementing air from 2.0 to 2.3 bar, approximately 15 tires.
- Bicycle Tires: Supplementing air from 0psi to 120psi, approximately 7 tires.
- Balls: Supplementing air from 0psi to 8psi, approximately 80 balls.
9. User Tips
- Always fully charge the device before extended use to ensure optimal performance.
- Check your vehicle's recommended tire pressure (usually found on a sticker inside the driver's door jamb or in the owner's manual).
- For best accuracy, check tire pressure when tires are cold.
- Keep the nozzle adapters organized to easily find the correct one for your needs.
10. Warranty and Support
For any warranty claims, technical support, or inquiries, please contact the seller or retailer from whom you purchased this product. Please retain your proof of purchase for warranty purposes.
A PDF version of this manual may be available for download from the product page: View User Manual (PDF)