1. Introduction
The HOMEFISH 180° Rotatable PIR Infrared Motion Sensor Switch is an advanced, energy-saving lighting control device designed for automatic human body detection. It integrates high-sensitivity detection technology with an intelligent circuit and SMT components to provide convenient, safe, and practical lighting solutions. This sensor can automatically identify day and night conditions and offers a wide detection range, making it suitable for various indoor and outdoor applications.
2. Product Features
- Easy Installation: Designed for straightforward setup.
- Automatic Operation: Provides automatic, convenient, safe, and practical lighting control.
- Power & Detection Indication: Features indicators for power status and motion detection.
- Day/Night Identification: Automatically adjusts operation based on ambient light levels.
- Wide Detection Range: Offers a broad service field, covering up, down, left, and right.
- Energy-Saving: Utilizes a high-sensitivity detector, integrated circuit, and SMT technology for efficient operation.
- Human Motion Infrared Detection: Activates the controlled load instantly upon detecting human motion.
- Adjustable Sensitivity & Detection Head: Fine-tune motion capture with the SENS knob. The sensor head swivels 90° vertically and horizontally for optimal coverage.
- Waterproof Design: Full-body waterproof construction suitable for both indoor and outdoor use, withstanding rain and moisture.
- Customizable Lighting Duration: Adjustable light-on time from 5 seconds to 6 minutes.
3. Specifications
| Attribute | Value |
|---|---|
| Color Options | Grey, Black, White |
| Material | ABS Plastic |
| Switch Type | Proximity Switch |
| Working Rotation | 180 Degrees |
| Voltage | AC85V~265V, DC 12V |
| EU LVD Voltage | Below 50Vac or 75Vdc |
| IP Rating | IP44 (Indoor application) |
| LUX Setting | 2-2000lux (adjustable) |
| Induction Lighting Time | 5s~6min (adjustable) |
| Detection Distance | Approx. 12 meters |
| Recommended Installation Height | 1.5 - 2.5 meters |
| Max Output (Incandescent Lamp) | 1000W |
| Max Output (Fluorescent Lamp) | 100W |
| Max Output (Exhaust Fan, Motor, Electric Bell) | 100W |
| Warranty | 1 Year |
| Origin | Mainland China |
4. Installation
4.1 General Installation Guidelines
- Ensure power is OFF before installation to prevent electric shock.
- Install the sensor at a height of 1.5 to 2.5 meters for optimal detection.
- Avoid installing near heat sources (e.g., air conditioners, heaters) or in direct sunlight, as this can affect performance.
- The sensor head can be rotated 180 degrees to adjust the detection area.
4.2 Wiring Connection
The sensor typically has three wires for connection:
- Blue wire: Negative line (-) or Neutral line (N)
- Brown wire: Live wire (+) or Line (L)
- Red wire: Ground wire
Important Voltage Note:
- For 220V motion sensors, directly provide 220V AC voltage to the sensor. No external driver is needed.
- For 12V DC motion sensors, an external 220V AC to 12V DC driver (power supply/adapter) is required to convert the input voltage.
5. Operation
The motion sensor switch features adjustable settings to customize its behavior:
5.1 Adjusting Detection Angle
The sensor head can be manually rotated 180 degrees (90° vertically and horizontally) to precisely cover your desired detection area. This allows for fine-tuning of motion capture.
5.2 LUX Setting (Ambient Light Sensitivity)
Use the 'LUX' knob to set the ambient light threshold at which the sensor will operate. This ranges from 2 to 2000 lux. For example:
- Turn towards the 'sun' symbol for day and night operation (high lux).
- Turn towards the 'moon' symbol for night-only operation (low lux).
5.3 SENS Setting (Motion Sensitivity)
The 'SENS' knob controls the sensitivity of the motion detection. Adjust this to prevent false triggers or to ensure detection over a wider area.
5.4 TIME Setting (Lighting Duration)
The 'TIME' knob allows you to set how long the connected light or device remains ON after motion is detected and no further motion is sensed. This duration is adjustable from approximately 5 seconds to 6 minutes.
6. Troubleshooting
- Sensor is less sensitive: The sensor is generally more sensitive to movement across its detection field rather than directly towards it. If detection is poor, try adjusting the sensor's angle or location so that movement occurs across its field.
- Light does not turn on: If a person stops moving under the motion sensor, it may cease to detect their presence, and the light will turn off after the set time. Ensure continuous movement within the detection zone for continuous illumination.
- Poor detection in hot weather: In very hot summer conditions, if the ambient temperature is close to human body temperature, the sensor's ability to detect infrared heat signatures may be reduced, leading to less effective detection.
- No power/light: Check all wiring connections (Blue: Negative/Neutral, Brown: Live, Red: Ground). Ensure the correct voltage is supplied (AC85V~265V or 12V DC with appropriate driver).
7. Maintenance
- Cleaning: Regularly wipe the sensor lens with a soft, dry cloth to remove dust or debris that might obstruct its field of view. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check the wiring and mounting for any signs of wear, damage, or loosening.
- Environmental Factors: While the sensor is waterproof (IP44), extreme weather conditions or prolonged exposure to harsh elements may affect its lifespan. Consider sheltered installation for outdoor use where possible.
8. User Tips
- Optimal Placement: For best results, install the sensor in a location where expected movement will cross its detection path, rather than directly approaching it.
- Testing: After installation, test the LUX, SENS, and TIME settings during both day and night to ensure it meets your specific needs and avoids unnecessary activations.
- Energy Saving: Utilize the LUX setting to ensure lights only activate when ambient light is low, maximizing energy efficiency.
9. Warranty & Support
This HOMEFISH PIR Infrared Motion Sensor Switch comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For technical support or warranty claims, please contact your retailer or the manufacturer directly.
A detailed user manual in PDF format is available for download. You can access it via this link: HOMEFISH Motion Sensor User Manual (PDF).