FREDORCH Sex Machine A2 User Manual

1. Safety Information

1.1 General Safety Warnings

• Please read this user manual carefully before operating this unit to ensure proper and safe use. Keep it for reference.
• This product is intended for adult use only.
• Keep the circuit part away from water to avoid circuit faults.
• Avoid holding back the telescopic shaft thrusting for a long time, as this may shorten the motor's lifespan or damage it.
• It is not allowed to sit on the machine completely, as this may damage the machine stand, rendering the machine unusable.
• It is normal for the machine to heat up after long-term use. We suggest not using the machine continuously for more than 60 minutes.

1.2 Hygiene and Care

• Pay attention to hygiene; please wash all accessories before each use.
• Lubricant is necessary; it is recommended to use a condom for optimal experience.
• After use, turn off the adjusting knob, unplug the power cable, clean the machine and accessories, and store them in a cool and well-ventilated area.

2. Product Overview

2.1 Components

The FREDORCH Sex Machine A2 comes with several key components:

Image: FREDORCH Sex Machine A2 with labeled components including 3XLR Connector, Rotary Knob, Controller, Motor, Suction Cup, and Base Plate.

1. 3XLR Connector: For attaching dildo attachments.
2. Rotary Knob: Adjusts the angle of the thrusting position.
3. Suction Cup: For mounting the machine to smooth surfaces.
4. Motor: Powers the telescopic thrusting.
5. Base Plate: Provides stability for the machine.
6. Controller: Adjusts the speed of pumping and thrusting.

2.2 Dimensions

Image: Dimensions of the FREDORCH Sex Machine A2. Length: 14.5 inches, Width: 9.4 inches, Height: 5.1 inches (machine body) and 5.9 inches (total height).

3. Specifications

4. Assembly & Setup

Follow these steps to assemble and set up your FREDORCH Sex Machine A2:

Image: Visual guide for assembling the FREDORCH Sex Machine A2.

1. Press all suction cups on the base plate to mount the machine securely to a smooth, flat surface.
2. Install one of the included attachments onto the 3XLR connector (1).
3. Plug in the power adapter and turn on the knob switch on the controller.

5. Operation

5.1 Basic Operation

1. Once assembled and powered on, rotate the Rotary Knob (2) to adjust the angle of the thrusting position as desired.
2. Rotate the Controller (6) knob to adjust the speed of pumping and thrusting.
3. Enjoy your experience.

5.2 Adjustable Positions

The machine offers an adjustable angle from -45° to 85° to suit various preferences and positions.

Image: Examples of adjustable positions: Doggy Posture 45°, Missionary Posture 0°, Female Upper 85°, Behind Posture -45°.

5.3 Remote Control Pairing (for Wireless Remote Control option)

If you have the wireless remote control option, follow these steps to pair it:

Image: Wireless Remote Control and Controller unit.

1. Press and hold the speed control button on the control box for 2 seconds. The pairing indicator light will turn on.
2. While the indicator light is on, press any button on the remote control. The pairing is successful once the indicator light turns off. If it fails, repeat the process.
3. To clear all previous pairings, press and hold the governor button of the control box for approximately 10 seconds. The paired LED on the control box will flash for 2 seconds to confirm the clearing.

6. Attachments

The FREDORCH Sex Machine A2 is compatible with various 3XLR dildo attachments. Here are some examples and their dimensions:

Note: The specific attachments included may vary based on your purchase. Please refer to your package contents.

7. Maintenance & Care

7.1 Cleaning

• Always turn off the machine and unplug it before cleaning.
• Wash all attachments with mild soap and warm water. Rinse thoroughly and allow to air dry completely.
• Wipe the machine body with a damp cloth. Do not immerse the machine in water.
• Ensure all components are dry before storing.

7.2 Storage

• Store the machine and its accessories in a cool, dry, and well-ventilated area, away from direct sunlight and extreme temperatures.
• Keep out of reach of children.

8. Troubleshooting

• **Machine not turning on:** Check if the power adapter is securely plugged into both the machine and the power outlet. Ensure the knob switch is turned on.
• **Remote control not working:** If the wireless remote control fails to pair, repeat the pairing steps carefully. If issues persist, contact customer service.
• **Machine overheating:** It is normal for the machine to get warm during extended use. If it becomes excessively hot, discontinue use and allow it to cool down. Do not use continuously for more than 60 minutes.
• **Unstable mounting:** Ensure the suction cups are clean and applied to a smooth, flat, non-porous surface for optimal adhesion.

9. User Tips

• Experiment with different angles and speeds to find your preferred settings.
• Always use a water-based lubricant with silicone attachments to prevent material degradation.
• Consider using a condom over attachments for easier cleanup and enhanced hygiene.
• Regularly inspect attachments for any signs of wear or damage and replace them if necessary.

10. Support & Further Information

If you encounter any problems with your FREDORCH Sex Machine A2 or have questions not covered in this manual, please contact the seller for assistance. The seller aims to respond within 24 hours and provide a solution.

For a downloadable version of this manual, you may refer to the official PDF document: User manual (PDF).