FEELWORLD FW568S

Contents

FEELWORLD FW568S 6 Inch On-camera Monitor User Manual

Model: FW568S

1. Safety Information

Thank you for purchasing the FEELWORLD FW568S 6-inch Full HD monitor. Please read this manual carefully before using the unit to ensure safe and optimal operation.

1.1. Important Cautions

  • Avoid heavy impact and dropping the product onto the ground.
  • Do not cover vents or holes on the enclosure. Ensure good ventilation by not placing the unit on soft surfaces like beds, sofas, or rugs to prevent overheating and extend service life.
  • The screen is made of glass. Do not drop the screen towards the ground. Keep away from injury if the screen is broken.
  • Keep the product away from heat sources (radiators, water heaters, stoves, etc.).
  • Avoid prolonged exposure to direct sunlight, as it can damage the LCD screen.
  • Do not attempt to disassemble or repair the unit yourself. There are no user-adjustable components inside.

1.2. LCD Screen Maintenance

To maintain the LCD screen and prevent scratches, discoloration, and other damages:

  • Refrain from using hard objects to hit the screen.
  • Do not force or aggressively wipe the screen.
  • Do not use chemical solutions or spray any detergent directly on the screen.
  • Do not write or stick anything directly on the screen.
  • Simply wipe with a clean, soft cloth, ensuring no water is left on the screen.

1.3. Plastic Cover Maintenance

To protect the plastic cover:

  • Do not use chemical solutions to clean the cover.
  • Keep away from volatile substances.
  • Do not clean the case aggressively.
  • Simply wipe with a clean, soft cloth, ensuring no water is left on the cover.

2. Product Overview

2.1. Key Features

  • 6-inch 1920x1080 Full HD IPS screen.
  • New UI interface for easier setup.
  • Scroll Wheel button operation for comprehensive control.
  • Supports 3D LUT Log to REC.709 and user 3D LUT upload (up to 32).
  • Includes Waveform, Vectorscope, RGB Histogram, Focus Assist, Monochrome, and other professional monitoring functions.
  • Multiple power supply modes: DC IN 12V, Type-C 5V, and NP-F battery slot.
  • Stereo Earphone output.
  • DC 8V power out to power DSLR or mirrorless cameras.

2.2. Package Contents

The package includes the following items:

FEELWORLD FW568S Packaging List

Image: Packaging list for FEELWORLD FW568S monitor.

  • 1 × Monitor
  • 1 × Micro HDMI Cable
  • 1 × Tilt Arm
  • 1 × Sunshade
  • 1 × Type-C to USB Cable
  • 1 × Manual (This document)

3. Product Description (Hardware)

3.1. Front Panel

The front panel features the 6-inch Full HD IPS display.

FEELWORLD FW568S Front View

Image: Front view of the FEELWORLD FW568S monitor.

3.2. Back Panel

The back panel includes the NP-F battery plate and mounting points for the external install and power kit.

FEELWORLD FW568S Back Panel and Ports

Image: Back panel showing F970 battery slot, Type-C, DC 12V input, and menu UI.

3.3. Button Functions

Button Function (OSD not displayed) Function (OSD displayed)
MODE Long press: Power ON/OFF
Short press: Signal mode switching
Long press: Power OFF
F1 Custom button F1 N/A
F2/EXIT Custom button F1 Return to previous OSD menu / Exit the menu
MENU (Scroll Wheel) Short press: Bring up main menu
Scroll: Adjust Volume/Backlight
Scroll: Select menu item/adjust value
Short press: Confirm selection
Long press: Return to previous OSD / Exit menu

3.4. Port Instructions

FEELWORLD FW568S Port Diagram

Image: Detailed diagram of all input and output ports on the monitor.

3.4.1. Bottom Ports

  • Type-C: Type-C power input (recommended for local power only, not for loop-out power). Also used for firmware updates and LUT file import.
  • 3.5mm Earphone Slot: Stereo earphone output.
  • DC OUT 8V: DC power output interface (polarity: center positive). Barrel output for powering cameras via a DC coupler (e.g., NP-FW50, LP-E6, DMW-BLF19).
  • DC IN 12V: DC power input interface (polarity: center positive). Supports 7~24V wide voltage.

3.4.2. Left Side Ports

  • HDMI IN: V1.4 HDMI signal input, up to 4K@30Hz.
  • HDMI OUT: V1.4 HDMI signal output, up to 4K@30Hz.
  • SDI OUT: SDI signal output.
  • SDI IN: SDI signal input.

3.5. Power Supply Options

  • NP-F Battery Plate: The rear cover is equipped with an F970 battery plate, compatible with Sony F970 series batteries (F970, F960, F950, F930, F770, F750, F730, F570, F550, F530). It is recommended to use standard original F970 batteries. When using battery power, the DC OUT 8V interface and external install/power kit can power other devices. Use a larger capacity battery for extended use. Remark: Remove the battery if the monitor is not used for a long time.
  • DC IN 12V: Via the DC 12V input port on the bottom. A DC power adapter (5.5mm outer, 2.1mm inner) supporting 7~24V is required (purchased separately). When using an external adapter, the DC OUT 8V and external install/power kit can power other devices. A 3A or higher power adapter is recommended when powering other equipment.
  • Type-C 5V: Via the Type-C input port on the bottom. Can be connected to a power bank for power supply. This port is not used for data transmission and is recommended for local power supply only.

3.6. Sony F970 External Install and Power Kit

This kit is designed to attach to the back of the monitor, allowing installation of external equipment like wireless transmitters, LED lights, or video converters, which can then be powered by the NP-F battery.

  • The kit has two cross grooves for adjusting the position of external devices (up/down, left/right) by loosening 2 screws. It can also be installed upside down.
  • To move the kit: Loosen 2 screws, then adjust its position.
  • To remove the kit: Loosen 2 screws, move the kit left, then align the round holes with the screws. (Ensure monitor is off and battery/power adapter is removed before disassembly).
  • To install the kit back: Screw the 2 screws back into the screw holes on the monitor's back. Install the 2P power cable to the cutout. Align the kit's round hole with the screw, push the kit to the screw at the center of the cross, then tighten the screws.

3.7. Mount Points

  • 1/4-20 Thread Points: Three 1/4-20 thread points (top, bottom, right side) allow easy connection to hot shoe mounts or tripods.
  • Tilt Arm Mounting: The included tilt arm secures the monitor to your camera via a shoe mount or 1/4-20 thread. It provides 180° tilt and features a cold shoe for accessories like microphones or LED lights.

3.8. Sunshade Installation

The sunshade helps reduce glare for better viewing in bright conditions.

  • Attach the Velcro (hook side) to the outside of the sunshade frame.
  • Open the sunshade and align the Velcro (loop side) on the inside of the sunshade with the Velcro (hook side) on the monitor's sunshade frame.
  • Complete the sunshade installation.

4. Operating Instructions

4.1. Basic Operation

  • Power On/Off: After connecting to power, the indicator will be Red. Press the MODE button to turn on the monitor; the indicator will turn Yellow. When inputting signals, the indicator will turn Green.
  • Volume/Backlight Adjustment: When the OSD menu is not displayed, scroll the MENU wheel to adjust volume or backlight. This can be configured in the "User Options" menu under "Left and Right Key Set".
  • Menu Navigation: Press the MENU scroll wheel button to enter the OSD main menu. Scroll the wheel to navigate through secondary menu functions. Press the MENU wheel to enter a secondary menu, scroll to select a function, and press MENU again to confirm. Scroll the wheel to adjust parameter values.
  • Exiting Menu: Long press the MENU wheel button or press F2/EXIT to exit the menu.

4.2. Menu Interface and Functions

The monitor features a new UI for intuitive control over various professional functions.

FEELWORLD FW568S All Scopes Mode

Image: Monitor display showing various scopes (waveform, vector, histogram) for accurate monitoring.

4.2.1. Assist Functions

  • All Waves (On/Off): Displays waveform, vector, histogram, and embedded audio simultaneously.
  • Waveform: Displays brightness levels (RGB, YUV, Y). Adjustable transparency.
  • Vector: Shows color saturation and hue.
  • Histogram: Displays RGB1, RGB2, or Y channel distribution.
  • Focus Assist: Highlights in-focus areas (Red, Green, Blue). Adjustable peaking level (1-10).
  • Embedded Audio: Audio level meters (green, yellow at -20dB, red at -9dB).
  • Over Exposure: Zebra pattern for overexposed areas. Adjustable exposure level (10-100).
  • Check Field: Displays Red, Green, Blue, or Mono channels.

4.2.2. Marker Functions

  • Nine Grid (On/Off): Displays a 3x3 grid. Color selectable.
  • Safe Frames (On/Off): Displays safe area guides (80%, 85%, 90%, 93%, 96%, 2.35:1). Color selectable.
  • Center Marker (On/Off): Displays a crosshair in the center. Color selectable.
  • Ratio Marker (On/Off): Displays aspect ratio markers (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1). Color selectable. Adjustable mark (0-5).

4.2.3. Image Functions

  • Scan Mode: Under Scan, Over Scan.
  • Aspect Ratio: Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen.
  • Anamorphic: 1.33X, 1.6X, 2.0X, 2.0X MAG, User (1.20X-2.00X).
  • Image Flip: H Flip, V Flip, H_V Flip.
  • Zoom Mode: 2X, 4X, 9X, 16X, User (100%-200%).
  • Image Freeze: On/Off.
  • P2P (Pixel to Pixel): On/Off.

4.2.4. User Option Functions

  • LUT (Look Up Table): On/Off. Supports SLOG2, SLOG3, LOGC, VLOG.
  • LUT Import: Copy 3D LUT files to a USB flash drive, insert into Type-C to USB Connector, then press MENU to import.
  • LUT Table: Shows 4 built-in LUTs and up to 32 custom loaded LUTs.

4.2.5. System Functions

  • Display Adjustment: Backlight, Brightness, Contrast, Saturation, Tint (0-100).
  • Color Adjustment: Color Temp (5600K, 6500K, 9300K, User). User mode allows RGB adjustment (0-255).
  • Shortcut Key (F1, F2): Assign functions like All Waves, Waveform, Vector, Histogram, Focus Assist, Zoom, etc.
  • Left Right Key Set: Assign Volume or Backlight to the scroll wheel when OSD is not displayed.
  • Language: English, Simplified Chinese, Traditional Chinese, Spanish, Portuguese, French, Dutch, German, Japanese, Russian, Korean.
  • OSD Option: OSD Time (Off, 15s, 30s, 45s), OSD Transparency (Off, 25%, 50%, 75%).
  • Volume: 0-100.
  • Reset: Resets all settings to factory defaults.
  • Firmware Update: Copy upgrade file to USB drive, insert via Type-C to USB Connector, press MENU to confirm. Reboot after update.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your FEELWORLD FW568S monitor.

  • Cleaning the Screen: Use a clean, soft, lint-free cloth to gently wipe the screen. Do not use chemical cleaners, abrasive materials, or excessive force. Ensure the screen is dry after cleaning.
  • Cleaning the Casing: Wipe the plastic casing with a soft, damp cloth. Avoid harsh chemicals or solvents.
  • Storage: When not in use, store the monitor in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the NP-F battery.
  • Ventilation: Ensure the ventilation holes are clear of dust and debris to prevent overheating.

6. Troubleshooting

6.1. Only Black and White or Monochrome Picture

  • Check saturation, brightness, and contrast adjustments in the menu.
  • Check if "Check Field" function is enabled and set to black, white, or monochrome.

6.2. No Image After Power On

  • Check if the signal cable is connected properly and securely.
  • Ensure you are using the standard adapter to connect the monitor.
  • If powered by battery, check if the battery is fully charged.

6.3. Earphone No Sound

  • Check if the Volume control is turned up. Press the volume button and try to increase the volume.

If you encounter other problems, please contact FEELWORLD customer support or your retailer for assistance.

7. Specifications

Feature Specification
Panel Size6" IPS
Resolution1920x1080 pixels
Dot Pitch0.069 (H) × 0.069 (V) mm
Aspect Ratio16:9
Brightness450 cd/m²
Contrast1000:1
Viewing Angle80°/80° (L/R) 80°/80° (U/D)
BacklightLED
InputSDI, HDMI, DC IN 5V (Type-C)
OutputSDI, HDMI, DC OUT 8V, Barrel (5.5mm outer, 2.1mm inner)
Audio3.5mm Stereo Headphone
HDMI Support Format480i/480p/576i/576p, 720p (60/59.94/50/30/29/25/24/23.98), 1080i (60/59.94/50), 1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF), 4K UHD 3840×2160p (30/29.97/25/24/23.98 Hz), DCI 4K 4096×2160p (24Hz)
SDI Support Format720p (60/59.94/50/30/29/25/24/23.98), 1080i (60/59.94/50), 1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)
Input VoltageDC: 7~24V
Power Consumption≤9W
Battery PlateF970 Battery Plate
Install Way1/4-20 mount points (top, bottom, right)
Working Temperature-20°C ~ 50°C
Storage Temperature-30°C ~ 60°C
Unit Size151L × 92H × 31.4D (mm)
Unit Weight203g

Note: Specifications are subject to change without prior notice as product features and performance are continuously improved.

8. User Tips

  • Battery Management: Always carry spare NP-F batteries, especially for long shoots. Monitor battery levels closely using the on-screen indicators. Remove batteries when the monitor is not in use for extended periods to prevent discharge.
  • Cable Management: Use cable ties or clips to secure HDMI/SDI and power cables to prevent accidental disconnections or damage during movement.
  • Sunshade Use: Always attach the sunshade when shooting outdoors or in brightly lit environments to improve screen visibility and reduce glare.
  • LUTs for Consistency: Utilize the 3D LUT feature to apply consistent color grading previews on set, matching your post-production workflow.
  • Focus Assist: Make good use of the Focus Assist feature to ensure critical focus, especially when shooting with shallow depth of field.

9. Warranty and Support

FEELWORLD products are designed for reliability and performance. For any technical issues, warranty claims, or support inquiries, please contact your authorized FEELWORLD dealer or FEELWORLD customer service directly.

Please refer to the official FEELWORLD website or the full PDF user manual for detailed warranty terms and conditions. A digital copy of this manual can be found at: FEELWORLD FW568S User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.