GGBEE LED Corn Light Bulb Series (E27-72LED-5730)

Contents

GGBEE E27 E14 LED Corn Light Bulb User Manual

Model: LED Corn Light Bulb Series (E27-72LED-5730)

1. Product Introduction

This manual provides essential information for the safe and efficient use of your GGBEE E27 and E14 LED Corn Light Bulbs. These universal light bulbs are compatible with standard E27 and E14 screw sockets, offering easy installation and strong versatility for various indoor lighting scenarios, including homes and offices.

Two GGBEE LED corn light bulbs, one E27 and one E14, illustrating high brightness, energy-saving features, uniform light, express setup, and long life.
Figure 1: GGBEE LED Corn Light Bulbs (E27 and E14 types)

2. Specifications

The GGBEE LED Corn Light Bulbs are designed with advanced technology for optimal performance and energy efficiency. Key specifications are detailed below:

Parameter Value
Name LED Corn Bulb
Base Type E27 / E14
LED Quantity 72 / 96 LEDs
LED Type 5730 SMD (Epistar chip)
Voltage AC 220-240V
Beam Angle 360°
Color Temperature Warm White: 2800-3200K, Cold White: 6000-6500K
Luminous Flux 980-1200LM
Material Transparent PC Housing
Lifespan Over 50,000 hours
Power Tolerance 3%
Shape Annular
Recommended Area 5-8㎡
Product parameters table for LED Corn Bulbs, detailing base type, LED quantity, LED type, voltage, beam angle, color, material, and long life.
Figure 2: Detailed Product Parameters
Diagram showing the dimensions of E27 and E14 LED corn bulbs with 72 and 96 LEDs, including width and height measurements.
Figure 3: Product Size Dimensions for E27 and E14 Bulbs

3. Setup and Installation

These LED corn bulbs feature a standard screw mouth for easy installation into compatible fixtures.

Image showing the E14 and E27 standard screw mouth lamp holders for the LED corn bulbs, emphasizing ease of installation and strong conductivity.
Figure 4: Standard E14 and E27 Screw Mouth

Installation Steps:

  1. Disconnect Power: Before beginning installation, ensure the power supply to the light fixture is disconnected. Turn off the corresponding light switch and exercise caution to avoid electric shock.
  2. Insert Bulb: Align the base of the LED corn bulb with the E27 or E14 socket. Gently rotate and tighten the bulb into the socket. Do not apply excessive force.
  3. Verify Operation: Once the bulb is securely installed, turn on the power supply and confirm that the light bulb illuminates normally.

4. Operating Instructions

Your GGBEE LED Corn Light Bulb is designed for simple operation. Once installed, it functions like any standard light bulb.

Key Features:

  • High Brightness & Energy Saving: Utilizes Epistar 5730SMD chips for enhanced brightness and efficiency.
  • Uniform Light: Provides a multi-angle luminous effect with high brightness and uniform light distribution, minimizing dark areas.
  • High Color Rendering: Designed to render colors accurately, closer to natural light, enhancing the realism of objects.
  • Color Temperature Options: Available in Warm White (2800-3200K) for a cozy atmosphere and Cold White (6000-6500K) for bright illumination.
Close-up of an LED corn bulb highlighting the Epistar 5730SMD chip, which provides 20% more brightness.
Figure 5: Epistar 5730SMD Chip for Enhanced Brightness
Comparison images showing the high color rendering capability of the LED corn bulb, making objects appear more realistic.
Figure 6: High Color Rendering for Natural Light
Bedroom scene demonstrating the difference between warm white light (2800-3200K) and bright white light (6000-6500K) from the LED corn bulbs.
Figure 7: Warm White vs. Cold White Light Options

5. Maintenance and Care

To ensure the longevity and optimal performance of your LED corn bulb, follow these maintenance guidelines:

  • Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Replacement: If the bulb is damaged or aging, replace it promptly. Always disconnect power before attempting to replace the bulb.
  • Heat Dissipation: LED bulbs generate heat. Ensure they are used in spaces with adequate ventilation and heat dissipation. Avoid using them in narrow or enclosed fixtures that can trap heat, as this will significantly shorten their lifespan.
Image illustrating the importance of proper heat dissipation for LED bulbs, warning against use in small, poorly ventilated spaces.
Figure 8: Importance of Heat Dissipation

6. Troubleshooting

If you encounter issues with your LED corn bulb, refer to the following common troubleshooting steps:

  • Bulb Not Lighting Up or Poor Contact:
    1. First, ensure the power supply is connected and the light switch is on.
    2. Check the contact between the bulb and the lamp holder. Unscrew the bulb, inspect the contacts for any debris or damage, and then re-screw it firmly into the socket.
  • Flickering or Dim Light:
    • Ensure the bulb is not used under overload conditions.
    • Verify that the voltage in your region (AC 220-240V) matches the bulb's requirements. These bulbs are not compatible with 110V systems.
  • Short Lifespan:
    • Ensure the bulb is not used in a narrow or poorly ventilated space, which can lead to overheating and reduced lifespan.

If the issue persists after following these steps, please contact customer support for further assistance.

7. Safety Precautions

WARNING: Failure to follow these safety precautions may result in electric shock, fire, or personal injury.

  • Power Disconnection: Always disconnect the power supply before installing, replacing, or performing any maintenance on the light bulb. Live operation is strictly prohibited.
  • High Temperature: After the light bulb has been on, its surface temperature will be high. Do not touch it directly to avoid burns. Allow sufficient time for the bulb to cool down before handling.
  • Voltage Compatibility: This product is designed for AC 220-240V voltage systems only. It is NOT suitable for use in countries or regions with 110V voltage (e.g., United States, Canada, Mexico, Japan). Using the bulb with an incompatible voltage may cause damage to the bulb or fixture and poses a safety risk.
  • Overload Protection: Do not use the bulb under overload conditions. Ensure the fixture's wattage rating is compatible with the bulb.
  • Environment: Use the bulb in a room temperature environment, away from excessive humidity, high temperatures, and flammable materials.
  • Disassembly: For safety and warranty reasons, non-professionals should not attempt to disassemble the light bulb.
  • Heat Dissipation: LED bulbs should not be used in small spaces with poor heat dissipation, as this will significantly shorten their service life and could pose a fire hazard.

8. Warranty and Support

GGBEE products are manufactured to high-quality standards. For any issues not resolved by the troubleshooting guide, please contact our customer service for assistance. Please have your purchase details ready when contacting support.

PDF User Manual: A detailed user manual in PDF format is available for download. You can access it via this link: GGBEE LED Corn Light Bulb User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.