Introduction
This multifunctional detector is designed to safeguard your privacy by identifying various surveillance devices such as hidden cameras, wiretaps, and GPS locators. It combines active infrared scanning with passive wireless scanning to detect both wired and wireless threats across a frequency range of 1MHz to 6.5GHz. This manual provides detailed instructions for proper setup, operation, and maintenance of your device.
Important Safety Information
Please read this manual thoroughly before use. Do not use this product for any illegal purposes. Always observe local laws and regulations regarding privacy and surveillance. Misuse of this device may result in legal consequences.
Package Contents
- Anti Spy Hidden Camera Detector (Model XSJ-T01)
- USB Type-C Charging Cable
- User Manual

Product Overview
Familiarize yourself with the components of your detector:

- Antennae: For signal reception.
- Lens Identification Lenses (Scan Window): Used for infrared camera detection.
- LED Infrared Light: Emits infrared light for camera lens detection.
- Signal Indicator: LED bar displaying signal strength.
- Camera IR Detection Key (Infrared Detection Key): Activates infrared scanning mode.
- Signal Detection Function Keys (MODE Key): Toggles between 2.4G and Full-Band detection modes.
- Switch Key/Sensitivity Adjustment (On/Off Button): Powers the device on/off and adjusts sensitivity.
- Charging Port (Type-C/5V): For connecting the charging cable.
- Red/Blue Indicator: Indicates the active detection mode.
Setup
Charging the Device
Before first use, fully charge the detector. Connect the provided USB Type-C cable to the charging port (TYPE-C/5V) on the device and plug the other end into a suitable USB power source (e.g., computer USB port, USB wall adapter). The Charging Indicator will illuminate during charging and turn off when fully charged.
Operating Instructions
Power On/Off
- Power On: Long press the ON/OFF button for approximately 3 seconds until you hear a 'drop' sound. The signal lamps will light up sequentially and then turn off, indicating the device is in standby mode.
- Power Off: Press and hold the ON/OFF button for about 3 seconds until you hear a 'drop' sound. The device will then shut down.
2.4G Signal Detection Mode
- Tap the MODE key. The red light will illuminate, indicating entry into 2.4G band detection mode. The device will begin scanning for 2.4G signal sources (e.g., Wi-Fi cameras).
- Sensitivity Adjustment: Press the ON/OFF button cyclically to adjust the detection sensitivity.
- More white lights illuminated on the signal indicator indicate higher sensitivity and a wider search range.
- Fewer white lights indicate lower sensitivity, narrowing the detection range for easier pinpointing of a transmitter.
- Signal Indication: The top red light on the signal indicator signifies the strongest signal detected. A 'drip drip drip' sound will be emitted when a strong signal is detected. The stronger the signal, the more white lights will illuminate.
Full-Band Detection Mode
- Press the MODE key again. The blue light will illuminate, indicating entry into full-band detection mode (1MHz-6.5GHz range). This mode detects a broader range of wireless signals, including various bugs and trackers.
- Sensitivity Adjustment: Similar to 2.4G mode, use the ON/OFF button to adjust sensitivity. More white lights mean higher sensitivity and a wider search range. Fewer white lights mean lower sensitivity and a narrower detection range.
- Signal Indication: The top red light signifies the strongest signal, accompanied by a 'drip drip drip' sound when detected.
Camera Detection Mode (Infrared Scanning)
- Activation: Tap the Camera IR Detection Key (Infrared Detection Key) to enter infrared scanning mode. For optimal results, it is recommended to dim or turn off room lights. The four infrared LEDs on the device will illuminate.
- Scanning: Bring your eyes close to the Lens Identification Lenses (Scan Window) and point the device forward. Move the instrument up, down, left, and right to scan the surrounding environment through the special filter. If a hidden camera lens is present, you will observe a very strong, bright, flashing spot reflecting the infrared light.
- Blinking Frequency Adjustment: Tap the ON/OFF button to cycle through 6 different blinking frequencies for the infrared light. Each press increases the blinking speed, allowing you to adjust for optimal visibility based on the environment and the type of lens.
Alarm On/Off
- Turn Off Alarm: Press and hold the MODE key for 5 seconds. You will hear a confirmation sound indicating the alarm is off.
- Restore Alarm: Long press the MODE key for 5 seconds again to re-enable the alarm sound.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the device's surface or internal components.
- Storage: Store the device in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Keep it out of reach of children.
Troubleshooting
- Device not powering on: Ensure the device is fully charged. If the issue persists after charging, contact customer support.
- No signal detection: Verify that the device is in the correct detection mode (2.4G or Full-Band) for the type of signal you are trying to detect. Adjust sensitivity settings gradually to cover the area.
- Infrared scan not working: Ensure the Camera IR Detection Key has been pressed. Check for any physical obstructions on the infrared LEDs or the scan window.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | em |
| Model Number | XSJ-T01 |
| Origin | Mainland China |
| Detection Frequency Range | 1MHz - 6.5GHz (Full-Band) |
| Sensitivity | 6 levels adjustable |
| Charging Port | Type-C/5V |
User Tips
- For best results during camera detection, perform the scan in a dimly lit or dark room to enhance the visibility of reflections.
- Adjust sensitivity gradually, starting from a lower setting and increasing as needed, to pinpoint the exact location of a signal source more effectively.
- Regularly charge your device to ensure it's ready for use when needed, especially before traveling or entering new environments.
Warranty and Support
For warranty information or technical support, please refer to your purchase documentation or contact the seller directly through the platform where the product was purchased.
Important Legal Note
Please strictly observe the relevant laws of the country where you are using this product. Do not use this product for any illegal purpose. Otherwise, you will be responsible for the consequences.