1. Product Overview
The IKSLED LED Dimmable Touch Sensor Switch Controller is designed for controlling DC5V, 12V, and 24V LED strip lights in various applications such as closets, corridors, and other smart home lighting setups. This compact, flush-mount switch offers touch-sensitive on/off functionality and stepless dimming.

Figure 1: LED Dimmable Touch Sensor Switch Controller
2. Safety Information
- Please strictly follow all instructions and safety tips provided in this manual.
- Ensure the working voltage of the switch matches your LED light and power adapter.
- Do not use this induction switch with control motors, solenoid valves, solar lights, constant current lamps, or other incompatible equipment.
- Incorrect wiring can damage the device or connected components.
3. Installation and Setup
3.1. Pre-installation
- Determine the desired mounting location for the touch switch.
- Prepare an opening with a diameter of 10mm, 13mm, or 16mm, depending on the switch variant.

Figure 2: Switch Dimensions and Hole Sizes
3.2. Wiring Diagram
Refer to the diagram below for correct wiring connections. Incorrect polarity or connections can damage the switch or LED lights.

Figure 3: Wiring Diagram and Connection Points
- Red wire: Connect to LED+ / Power+ (Positive input from power supply and positive output to LED).
- Black wire: Connect to Power- (Negative input from power supply).
- Yellow wire: Connect to LED- (Negative output to LED).
3.3. Installation Steps
- Connect the LED light to the switch according to the wiring diagram.
- Securely fix the induction switch into the prepared hole.
- Finally, connect the power adapter to the switch's power input.
- Turn on the power supply.
4. Operating Instructions
- Turn On/Off: Short touch the sensor button to toggle the LED light on or off.
- Dimming: Long press the sensor button to continuously dim the LED light. Release to set the desired brightness. The dimming is stepless.
- Indicator: This switch does not have an indicator light.
5. Maintenance
The LED Dimmable Touch Sensor Switch Controller is designed for maintenance-free operation. Keep the switch clean and dry. Do not use abrasive cleaners or solvents.
6. Troubleshooting
If the LED light remains on or off and the switch cannot be controlled after connection, consider the following:
Possible Reasons:
- Mismatch of Working Voltage: The voltage of the power adapter, switch, and LED light must all match.
- Reversed Polarity: Input/output and positive/negative poles may be connected in reverse.
- Incorrect Usage Steps/Unfixed Switch: The induction switch must be fixed after power on. If it's not fixed and moves during use, it may constantly check the environment, leading to erratic behavior.
Resolutions:
- Verify Voltage: Confirm that your power adapter is a constant voltage DC3.7V, 5V, 12V, or 24V adapter, and that your LED light operates at the same DC voltage.
- Check Polarity: Inspect the wiring to ensure that the input/output and positive/negative poles are connected correctly as per the wiring diagram (Figure 3). Correct any reversed connections.
- Secure Switch: Turn off the power supply. Securely fix the induction switch in its intended position. Then, turn the power back on.
7. Specifications
| Parameter | Value |
| Brand Name | IKSLED |
| Working Voltage | DC 3V, 3.7V, 5V, 12V, 24V |
| Maximum Load | 3V>5W, 3.7V>7W, 5V>12W, 12V>36W, 24V>48W |
| Max Current | 2.5A |
| Switch Type | Touch On/Off Switch |
| Dimming Method | Long touch stepless dimming |
| Material | Plastic |
| Is Smart Device | Yes |
| Required Hole Size | 10mm, 13mm, or 16mm |
| EU LVD Voltage | Low voltage: Below 50Vac or 75Vdc |
| High-concerned chemical | None |
| Origin | Mainland China |
8. User Tips
No specific user tips were available from customer reviews or Q&A. To ensure optimal performance and longevity of your touch sensor switch, always:
- Double-check all wiring connections before applying power.
- Ensure the switch is firmly mounted to prevent accidental movement during operation.
- Use a stable, constant voltage power supply that matches the switch and LED light requirements.
9. Warranty and Support
This IKSLED product comes with a one-year warranty from the date of purchase. The warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.
For technical support or warranty inquiries, please contact your retailer or the manufacturer directly.