1. Safety Information
WARNING: Laser Radiation. Avoid direct eye exposure.
Read the Safety Instructions and Manual thoroughly before using this product. All users must fully understand and adhere to these instructions.
- While the product is in operation, be careful not to expose your eyes to the emitting laser beam (green light source). Exposure to a laser beam for an extended time may be hazardous to your eyes.
- Do not stare directly into the beam or view directly with optical instruments or set up the laser at eye level.
- Do not disassemble the laser tool. There are no user serviceable parts inside.
- Do not modify the laser in any way. Modifying the tool may result in hazardous Laser Radiation Exposure.
- Do not operate the laser around children or allow children to operate the laser.
- An exposure to the beam of a Class 2 laser is considered safe for a maximum of 0.25 seconds. Eyelid reflexes will normally provide adequate protection.
2. Product Overview
The BOAYAL T88 Laser Level is a versatile measuring tool designed for precise leveling in various construction and interior design tasks. It features 8 ultra-bright green laser lines, offering 360-degree full alignment.
2.1. Package Contents
Your BOAYAL T88 Laser Level package includes:
- 1x T88 Laser Level
- 1x Hard Carrying Case
- 1x L-Stand (Magnetic Bracket)
- 1x Type-C Power Cord
- 1x User Manual (PDF version available at PDF Manual)
2.2. Product Structure
- 360° Horizontal Beam Emission Port
- 360° Vertical Beam Emission Port
- Lock Switch (Mechanical Switch)
- Function Button (Power/Mode Button)
- Type-C Charging Port
- 1/4" Threaded Hole (for tripod mounting)
- Status Indicator Light
- Battery Indicator Light
3. Setup
3.1. Initial Placement
Place the laser level on a stable, flat surface. For optimal performance in self-leveling mode, ensure the surface is within the 4° compensation range.
3.2. Mounting Options
The T88 Laser Level can be mounted using its 1/4" universal interface or the included magnetic L-stand.
- Magnetic L-Stand: Attach the laser level to the L-stand. The stand features strong magnets for securing to metal surfaces and can be rotated 360° for flexible positioning.
- Tripod Mounting: Use the 1/4" threaded hole on the bottom of the device to attach it to a compatible tripod for height adjustment and stable placement.
4. Operating Instructions
Important: Keep the lock switch in the locked position when moving or storing the laser level.
4.1. Power On/Off
- To Power On: Slide the mechanical lock switch to the unlocked (open padlock) position. The laser lines will light up. Long press the power button (Function button) to turn on the instrument.
- To Power Off: Slide the mechanical lock switch to the locked (closed padlock) position. Long press the power button to turn off the instrument.
4.2. Self-Leveling Mode
When the lock switch is slid to the unlocked position, the machine unlocks and all laser lines are lit. The machine will automatically level, and the status indicator light will be green. If the indicator is red and the laser blinks frequently, it means the instrument is out of its self-leveling range (approximately 4°). Please place the laser level on a flatter surface.
4.3. Locked Mode (Manual Mode)
When the lock switch is set to the locked position, long press the power button. All laser lines will be on, flashing every 5 seconds, and the indicator light will be red. In this mode, you can tilt the level at will to project lines at any angle. Short press the power button to switch the light brightness. Long press the power button again to turn off the laser level.
4.4. Line Control and Brightness Adjustment (Energy-Saving Mode)
- Line Control: When the instrument is on, short press the 'H' button to control horizontal laser lines and the 'V' button to control vertical laser lines.
- Brightness Adjustment: In self-leveling mode, short press the power button to adjust the laser brightness. The brightness is divided into 4 grades (100%, 80%, 65%, 50%). This helps reduce energy consumption.
4.5. Pulse Mode
In the self-leveling mode, long press the power button to enter pulse mode. The status indicator light will keep flashing. Pulse mode enhances visibility and extends the working distance from 30m to 50m when used with a laser receiver, making it ideal for larger jobsites or outdoor use. Energy-saving mode is not valid in pulse mode.
4.6. Diagonal Mode (Slash Mode)
With the mechanical lock engaged, long press the power button to enter diagonal mode. This allows you to project laser lines at any desired angle, useful for tasks like stair laying or custom designs.
4.7. Charging the Battery
The T88 Laser Level features a built-in 3.7V 4000mAh Li-ion battery with a Type-C charging port. The power indicator light will be red during charging and turn green when fully charged.
The battery offers approximately 12 hours of continuous working time on the first gear and up to 52 hours on the fourth (lowest brightness) gear. It can be charged using a laptop, power bank, car charger, or any compatible Type-C power source.
5. Maintenance
- This laser instrument has been strictly calibrated and packaged in the factory. It is recommended to check the accuracy before the first use and periodically thereafter, especially in high-precision working environments.
- Do not store laser tools in direct sunlight or expose them to high temperatures. The housing and some internal parts are made of plastic and can deform under high temperatures.
- Clean the external plastic parts with a damp cloth. Even if these parts have some solubility, solvents should never be used.
- Use a soft dry cloth to remove moisture before storing.
- Do not dispose of this product with household waste.
6. Troubleshooting
- Laser lines blinking and red indicator: This indicates the device is out of its self-leveling range (inclination angle greater than 4°). Reposition the laser level on a flatter surface.
- Weak or no laser lines: Check the battery level. If the power indicator is blinking green, the battery is weak and needs charging.
- Inaccurate leveling: Ensure the device is in self-leveling mode (unlocked switch) and on a stable surface. If issues persist, the device may require recalibration.
7. Specifications
| Feature | Specification |
|---|---|
| Product Model | T88 |
| Laser Class | Class II |
| Laser Wavelength | Green beam (505-550nm) |
| Leveling Accuracy | ±1.5mm / 5m |
| Leveling/Compensation Range | 4° ±1° |
| Working Distance (Line) | Green beam (30m) |
| Operating Time | First gear: ~12 Hours, Fourth gear: ~52 Hours |
| Battery Type | 3.7V 4000mAh Built-in Lithium battery |
| Weight | 350g (Battery included) |
| Class of Protection | IP54 |
| Operation Temperature Range | -10°C ~ +50°C |
| Storage Temperature Range | -25°C ~ +70°C |
| Size | 101*55*96mm |
8. User Tips
- For precise measurements, always ensure the laser level is on a stable surface or securely mounted.
- When working in bright conditions or outdoors, use pulse mode with a laser receiver for better visibility and extended range.
- To maximize battery life, utilize the energy-saving mode by adjusting the laser brightness to the lowest effective setting for your environment.
- If working in confined spaces, remember that the laser line will project from the emission ports. Consider the unit's dimensions (101x55x96mm) for optimal placement.
9. Warranty and Support
9.1. Warranty Information
We provide a one-year warranty on the Laser Level from the date of purchase.
The warranty card must be provided when the instrument is under warranty, and the invoice shall be provided.
Please contact your local dealer for repair or replacement.
9.2. Warranty Disclaimer
The following conditions void the warranty:
- Unauthorized disassembly of instruments.
- Wrong operating or man-made damage to the instrument.
- Failure to use original accessories, causing damage.
- Giving the instrument to an unauthorized person or unit for repair.
- Product serial number is deleted.