1. Introduction
Thank you for choosing the E-ACE 1080P Dashcam. This device is designed to enhance your driving safety by providing high-definition video recording of your journeys. It features advanced technologies such as Super Night Vision, Wide Dynamic Range (WDR), G-Sensor for emergency recording, and loop recording to ensure continuous coverage. This manual will guide you through the installation, operation, and maintenance of your dashcam.
Important Safety Notes:
- Please check local/state laws or municipal code in your area related to proper use and installation of this product.
- The dashcam's built-in battery has a small capacity and is primarily for saving time and settings. For continuous operation, the dashcam must always be connected to an external power supply.
- The DVR is only compatible with cars that have a 12V power supply. A 24V power supply will burn the motherboard. If you intend to use it with a 24V system, please add a 24V to 12V converter.
2. Package Contents
Please verify that all items listed below are included in your package. The exact contents may vary based on the specific package purchased (e.g., with or without rear camera, SD card). Refer to the package pictures for accuracy.
- 1 x E-ACE Dashcam (B12)
- 1 x Power Charger (Car charger)
- 1 x User Manual
- 2 x Holder (Suction Cup Mounts)
- 1 x USB Card Reader (Gift)
- Optional: Rear View Camera with 6M/10M Cable
- Optional: Buck Line For 24H Parking Monitoring
- Optional: 32GB/64GB Class 10 High-Speed TF Card
- Optional: Installation Tool (Crowbar, Sticky Wire Buckle, Cleaning Cloth)
- Optional: 2 Pcs Blind Spot Mirror
3. Product Specifications
| Specification | Parameter |
|---|---|
| Product Model | B12 |
| Installation Type | Portable Recorder, suitable for all vehicles with windshield |
| Display Size | 4 inches IPS Touchscreen |
| Screen Ratio | 16:9 |
| Color | Black |
| Chipset (Processor/CPU) | JIELI / Generalplus |
| Camera Sensor | Front 2MP + Rear 1MP |
| Camera Lens | Front: 6 Glass, 170 Degree Angle, F2.0 Aperture; Rear: 4 Glass, 140 Degree Angle, F2.2 Aperture |
| Interface Method | AV-IN, MINI USB, TF Card |
| View Angle | Front 170° / Rear 140° |
| OSD Language | English (Default), Russian, German, French, Spanish, Italian, Chinese, Arabic, Danish |
| Display Screen | HD IPS Display |
| Camera Resolution | Front: 1080P (1920x1080) @30FPS, Rear: 720P (1280x720) @25FPS |
| Photo Resolution | 12M (200Mega Pixels) |
| Special Features | G-sensor, Parking Monitoring, Motion Detection, Digital Zoom, Loop Recording, Microphone, LED Display, Rear View Mirror, Night Vision, Dual Lens, Anti Surge Voltage Impact, Rear Camera, Waterproof, Anti Fog, Real Time Surveillance, Anti Vibration, Automatic White Balance, WDR, LED light, etc. |
| Time/Date Support | (Y/M/D/H/M) |
| Video Format | MOV, TS |
| Video Code | H.264 |
| Storage Card | Micro SD Card, Class 10 TF Card (Max. support 64GB) |
| Video Format (TV) | PAL / NTSC |
| WIFI/Bluetooth | Not Support |
| Current Frequency | 50Hz / 60Hz |
| USB Function | Memory Mode, Camera Mode, Recorder Mode |
| Input Voltage | 12-24V DC |
| Output Voltage | 5V/1A (Adapter) |
| Battery | Built-in 300mAh battery |
| Warranty | 365 days |
4. Setup and Installation
4.1. Dashcam Connection Routes and Methods
There are two primary methods for connecting your dashcam to power:
- Connection 1 (Recommended): Connect to the car's fuse box power supply.
- Connection 2: Connect to the cigarette lighter power supply connector.
4.2. Dashcam Installation Steps
- Insert the connecting wire into the gap of the roof of the front windshield.
- Take out the seal on the glass and the co-pilot cover.
- Insert the connecting wire into the card slot.
- Plug the 12V-24V power adapter into the vehicle's 12V power (Cigarette Lighter) port.
Please Note:
- Always use the original factory standard adapter charger. Connect one end of the car charger to the device's USB port and the other end to the car port. The device will start once the car engine launches.
- Do not personally dismantle the machine to avoid affecting the warranty. If power cord modification is needed, please seek professional assistance.
4.3. Rear Camera Connection Routes and Methods
If your package includes a rear camera, follow these instructions for installation:
There are two wiring methods for the rear camera:
- A. Installation in the car: Installed above the rear windshield.
- B. Installation outside the car: Installed above the rear license plate.
Wiring:
- Red Line: Connect the positive pole (+) of the reversing light.
- Black Line: Connect the negative pole (-) of the rear lamp.
Connecting the red cable to your car's reverse lamp positive pole will enable the auto-reversing function, switching the dashcam display to the rear camera view with parking lines when reverse gear is engaged.
4.4. How to Install the Suction Cup Mount to the Front Windshield
- Carefully clean the surface area of the front windshield where the dashcam is to be installed.
- Flip the locking lever to secure the suction cup in place. The suction cup can be moved freely by disengaging and re-engaging the locking lever.
- After the dashcam is positioned correctly, align the screw hole of the driving recorder with the thread on the suction cup mount, and tighten the nut to fix it in place.
Please note when installing:
- Install this product on the rear-view mirror for the best view.
- Ensure the lens is clear of the windshield wiper area for good vision, even in rainy conditions.
- Do not touch the lens with your fingers, as oils can leave residue, resulting in unclear recordings. Periodically clean the lens.
5. Operating Instructions
5.1. Dashcam Features Introduction and Buttons
The dashcam features a touch screen for easy navigation. The physical buttons provide additional control:
- MODE Selection Button: Long press to switch to the main setting interface (pause recording first).
- Down Selection Button: In menu options, press to scroll down.
- OK/Power Supply Button: Short press to turn On/Off, START/STOP recording, or take a picture in Photo Mode.
- Up Select Button: In menu options, press to scroll up.
- MENU Button: Enter/Exit the MENU. Press to call up the menu.
- Rear Camera Interface: Connect the rear camera here.
- USB Data Interface: Connect to PC for data transfer or external power for charging/operation.
- Infrared Light Sensors: Used for mounting the dashcam.
- REST Button: Press to reset the camera to factory settings. Use a card pin to press this button if the machine malfunctions.
- Night Lights: Automatically turn on in low light conditions for enhanced night vision.
- Lens: Viewing window.
- Speaker: Plays video audio and operating sound warnings.
- Storage Card Slot: Insert TF card here (supports up to 64GB, Class 10 recommended).
- Power-on Indicator: Blue when powered on (not charging), Red when MINI USB charging cable is plugged in.
- 4 inch LCD Screen: Image display and touch interface.
5.2. Main Interface Functions
The main interface provides quick access to key functions:
- RECORD: Click this icon to enter recording mode.
- TAKE PHOTO: Click this icon to enter photo mode.
- FILES: Click this icon to review video and photo files, and delete locked files.
- LOCK: This icon is virtual and does not work.
- MUTE SWITCH: Click this icon to turn speaker sound on/off.
- POWER OFF: Click this icon to manually turn off the dashcam.
- SETTINGS: Click this icon to enter the setting interface.
Please Note:
- The setting method for button type is the same as for touch type.
- Video Mode and Photo Mode share the same settings.
5.3. Setting Interface Operations
To access settings, click the "SETTINGS" icon from the main interface. Here you can configure various parameters:
- Protection: Select to auto-shutoff LCD when camera is not in use after 30, 60 seconds of inactivity. Select "Close" to disable screen saver. (Note: Screen turns off during recording but camera continues recording).
- Power Off: Adjust auto-shutoff time to "Close", 3, 5, or 10 minutes.
- Frequency: Adjust the light frequency between 50Hz or 60Hz.
- Key Sound: "Open" for beep sound on key press, "Close" for no sound.
- Language: Select preferred language.
- Television: Video Format (PAL or NTSC).
- Date & Time: Adjust date and time.
- Headlight: "Close" for fill light, "Open" for no fill light.
- Format: Format your storage card. Warning: Doing so will delete all files.
- Default Setting: "OK" to restore defaults, "Cancel" to keep current settings.
- Version: Displays firmware version information.
5.4. Device ON/OFF
- Auto On/Off: The camera automatically turns ON and OFF when connected to your vehicle's 12V port.
- Manual On/Off: Long press the OK/Power button to turn on/off the device.
NOTE:
Some vehicles' 12V ports provide power even after the ignition is turned off. In such cases, you must manually turn off the camera by pressing the power button, otherwise the battery will drain. Adjust auto-shutoff time in MENU settings (3, 5, or 10 minutes) to prevent battery drain.
5.5. Setting Date and Time
If the camera automatically turns on, it will be in standby mode. To set the date and time:
- Press the "MENU" button or click the MENU icon, then navigate to "SETTINGS" and select "Date & Time".
- Click the number corresponding to Year/Month/Date and Hour/Minute. Use the UP/DOWN buttons to adjust the numbers.
- Once completed, click "COMFIRM" to save and exit.
5.6. Dashcam Mode Operations (Recording)
When the car engine starts, the device automatically turns on and begins recording. When the engine stalls, it automatically stops recording. You can also manually stop recording by pressing the "OK" button.
Note:
If your car charger interface is always powered even when the engine is stalled, the power supply will continue. In this situation, manually shut down the device or unplug the car charger from the cigarette lighter port.
5.7. Other Types of Recording
- In the home interface, press the "RECORD" icon to start recording. Press it again to stop.
- Recordings are saved in 1, 3, or 5-minute segments (refer to Cyclic Record menu).
- When the memory card is full, the oldest unlocked files will be automatically overwritten (Loop Recording).
- Gravity sensor or emergency photography videos are not automatically overwritten and must be manually removed.
5.8. Dashcam Photograph Mode Operations
- When in video mode, click the camera icon to enter photo mode.
- Press the "OK" button to take pictures. The camera icon on the screen will flash.
5.9. Video & Photo Playback Mode Operations
- If recording, stop it first. Then click the "MENU" button and select the "FILES" icon.
- Click the photo or video icon to enter the view. Use the UP/DOWN buttons to select files.
- Press the "OK" button to play a video file, press again to pause.
5.10. How to Delete Photos or Video Files
- In Video & Photo Playback Mode, find the file you want to delete.
- Click the "Delete" icon to delete selected files.
- Batch Delete: Click the "Batch Delete" icon, select files (or "all"), then click the "Delete" icon.
- Protection: To prevent deletion, click the "Lock" icon and choose "Lock One/All". To unlock, click the "Unlock" icon and choose "Unlock One/All".
6. Special Features and Functions
6.1. G-sensor Function
When the gravity acceleration starts (e.g., due to a collision), the dashcam automatically saves the current video into an undeletable file. The G-sensor sensitivity can be adjusted in the menu: "High - Medium - Low - Off".
6.2. File Locking Function
Press the "OK" button during recording to save the current video file as a locked file, preventing it from being overwritten.
6.3. Parking Guard Function
When Parking Guard is enabled and the vehicle is stalled, the dashcam will enter an automatic shutdown procedure. If the car receives external vibrations, the dashcam will turn on, record for 10-15 seconds, and then shut down. If another shock is detected, it will start recording again. Parking guard videos are recorded at 1080P 30 frames/sec and are automatically locked.
Note:
The parking guard function only works when the camera automatically shuts down. If you manually turn the camera on or off, the parking guard will not function.
6.4. Motion Detection Function
When motion detection is enabled, the main interface will display. Short press the "OK" button to start recording for 10 seconds. After this, the camera will switch to motion detection standby mode. If motion is detected again, recording will resume.
Remarks:
The motion detection function requires connection to the car's fuse box or car power supply. The voltage must be converted to 5V when using a step-down wire connected to the driving recorder.
6.5. USB Mode
Connect the USB cable to a computer, and the dashcam will display the USB menu with the following options:
- Memory Mode: Access video and photo files on the TF card.
- Camera Mode: Use the dashcam as a PC camera for real-time video or video chat.
- Recorder Mode: Directly enter the video interface, similar to using the power cord.
6.6. Battery Level Indicator
The battery level is indicated by icons on the screen:
- Empty icon: About to shut down
- One bar: 20% battery
- Two bars: 60% battery
- Full icon: Fully charged
After switching on car power, the red charging indicator will light up. Full charge takes about 3 hours. The red indicator turns off when charging is complete.
7. Interface Icons Display
The dashcam's screen displays various icons to indicate status and active functions.
- Video Resolution Icon: Displays the currently selected video resolution (e.g., 1296P).
- G-sensor Icon: Indicates G-sensor is turned on. No display when off.
- Parking Guard Icon: Indicates Parking Guard function is active.
- Motion Detection Icon: Indicates Motion Detection is turned on. No display when off. Note: This feature requires hardware support.
- HDR Wide Dynamic Range Icon: Displayed on the left side of the screen when activated. Recommended to keep open. WDR adjusts brightness for clear images in varied lighting.
- No Memory Card Icon: Displayed when no memory card is inserted. Disappears when a card is inserted.
- Lock Icon: Displayed when a video is locked.
- Recording Time: Red font for current segment recording time (e.g., 00:02:40). White font for remaining recording time on memory card (e.g., 00:15:40).
- Setting Interface Icon: Click to enter settings.
- Camera Icon: Indicates recording mode.
- Camera Pictures Icon: Shows camera mode.
- Menu Button Icon: Click to enter the main interface.
- Time Display: (e.g., 10:35). No display when off.
- Date Display: (e.g., 2021-12-21). Reset before use. No display when off.
- License Plate Number Setting: No display after turning off this function.
- Charging Icon: Indicates charging.
- Speaker Sound Icons: Speaker sound open icon / Speaker sound close icon.
- Cyclic Record Icon: Indicates loop recording setting (Close, 1 Minute, 3 Mins, or 5 Mins).
- Interval Record: Indicates interval recording setting (Close, 1 Second, 2 S, or 5 S). Note: This function is only used when the motion detection function is used.
8. Troubleshooting (Customer Q&A)
This section addresses common issues you might encounter. If your problem is not listed or resolved, please contact customer support.
- Q1. Can't take photo and recording
- A1. Check if the TF card has enough space or is locked.
- Q2. Automatically stop when recording
- A2. Use a compatible high-speed TF card (Class 10 or above) with SDHC due to large HD video data. It is recommended to use a memory card above C4 (Class 4).
- Q3. "Files error" when replaying photo or video
- A3. This indicates uncompleted files due to TF card storage error. Please use the formatting function to format your TF card.
- Q4. Unclear video
- A4. Check for dirt or fingerprints on the camera lens and use lens paper to clean it.
- Q5. Black image when recording sky or water scene
- A5. Scenes with high contrast can affect the camera's automatic exposure. Adjust "Exposure" in the setting mode to correct this.
- Q6. The time and date always return to the initial state
- A6. This indicates the internal battery cannot be charged. The battery may need to be replaced.
- Q7. Cross stripe interference in image
- A7. This is due to incorrect "light frequency". Set the frequency to 50Hz or 60Hz according to your local power supply frequency.
- Q8. Camera freezes and cannot be started
- A8. Restart by pressing the "RESET" button briefly after a crash.
9. User Tips
- Consistent Power: Always connect the dashcam to your vehicle's power supply for continuous operation, as the internal battery is small and primarily for settings retention.
- Memory Card Quality: Use a high-quality Class 10 TF card (up to 64GB) for reliable recording, especially for HD video. Low-quality cards can cause recording issues.
- Lens Care: Regularly clean the camera lens with appropriate lens paper to ensure clear recordings and photos. Avoid touching the lens with bare fingers.
- Professional Installation: For complex wiring, especially involving the fuse box or buck line for 24H parking monitoring, consider professional installation to avoid damage and ensure proper function.
- Check Local Laws: Be aware of and comply with local and state laws regarding dashcam usage and installation.
- Exposure Adjustment: If recording scenes with high contrast (like sky or water), adjust the "Exposure" setting in the menu to prevent black images.
10. Maintenance
- Lens Cleaning: Periodically clean the camera lens with a soft, lint-free cloth or lens paper. Avoid abrasive materials or harsh chemicals.
- Software Updates: Check the manufacturer's website for any available firmware updates to ensure optimal performance and new features.
- Storage Card Management: Regularly format your TF card (after backing up important files) to maintain its performance and prevent file errors.
- Environmental Conditions: Avoid exposing the dashcam to extreme temperatures or direct sunlight for prolonged periods when not in use, as this can affect battery life and component longevity.
11. Warranty and Support
Your E-ACE Dashcam comes with a 365-day warranty from the date of purchase.
For any problems during setup or operation, please contact our customer support team. We are here to serve you wholeheartedly.
Email: fireking@e-ace.cn
Tel: +86-18127083357
Website: http://e-ace.cn
Address: Building A KangSheng FIREKING INTERNATIONAL CO., LTD, LongHua New District, Shenzhen, Guangdong, 518000, China.
You can also refer to the official user manual PDF for additional details: View User Manual (PDF)