1. Introduction
The coolo Zigbee Scene Switch Button is a wireless remote controller designed to simplify your smart home experience. It allows you to control various smart devices and activate pre-set scenarios with a single click, double click, or long press. This device operates using the Zigbee 3.0 communication protocol and requires a compatible Zigbee gateway (not included) for functionality.
Important Pre-Purchase Notes:
- A Ewelink Zigbee Gateway is Required (not included).
- Not compatible with Smart Life/Tuya app.
- Supports Ewelink app ONLY (officially).
2. Package Contents
Please check the package for the following items:
- 1 x coolo Zigbee Scene Switch Button (sensor)
- 1 x User Manual
Note: A Zigbee hub/gateway is required for operation and is not included in the package.
3. Specifications
| Feature | Specification |
|---|---|
| Model Number | Zigbee Button Scene Switch |
| Brand Name | coolo |
| Linking Method | Zigbee 3.0 |
| Power Supply | Battery CR2032 3V DC (included) |
| Voltage | Low voltage: Below 50Vac or 75Vdc |
| Control Distance | 25m open area |
| Dimensions | 50mm x 50mm |
| Operating Temperature | -10°C ~ 45°C |
| Working Humidity | <90%RH |
| Battery Life | 1 year (General use) |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
4. Setup and Installation
4.1 Requirements
- A compatible Zigbee gateway/hub (e.g., Ewelink Zigbee hub). This is NOT included.
- Ewelink application installed on your smartphone.
4.2 Pairing with Ewelink App
- Ensure your Ewelink Zigbee hub is powered on and connected to your network.
- Open the Ewelink app on your smartphone.
- Add the Zigbee hub to your Ewelink app first, if you haven't already.
- In the Ewelink app, navigate to the device addition section.
- Long press the button on the coolo Zigbee Scene Switch Button for approximately 6 seconds until its indicator light begins flashing rapidly. This indicates it is in pairing mode.
- Follow the prompts in the Ewelink app to discover and add the button under your Zigbee hub.
- Once successfully added, the button will appear in your Ewelink app, and you can proceed to configure its functions.
4.3 Physical Installation
The coolo Zigbee Scene Switch Button features adhesive installation, allowing it to be flexibly placed on various surfaces without the need for wiring.
- Choose a clean, dry, and flat surface for installation.
- Remove the protective film from the adhesive backing of the button.
- Press the button firmly onto the desired surface for a few seconds to ensure secure attachment.
5. Operating Instructions
The coolo Zigbee Scene Switch Button supports multiple actions to trigger different smart home scenarios:
- Single Press: Activates a specific scene or controls a single device (e.g., turn on living room light).
- Double Click: Triggers another scene or action (e.g., turn on bedroom light, or activate 'away mode' to turn off all lights and appliances).
- Long Press (>3 seconds): Initiates a third distinct action or scenario.
You can configure these actions within the Ewelink application to suit your smart home automation needs.
6. Maintenance
6.1 Battery Replacement
The coolo Zigbee Scene Switch Button is powered by a CR2032 3V DC battery, which typically lasts for about 1 year under general use. When the battery is low, the device's performance may degrade, or it may stop responding. To replace the battery:
- Gently open the casing of the button to access the battery compartment.
- Remove the old CR2032 battery.
- Insert a new CR2032 3V DC battery, ensuring correct polarity.
- Close the casing securely.
6.2 Cleaning
To clean the device, wipe it with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the device.
7. Troubleshooting
- Device not responding:
- Check if the battery needs replacement.
- Ensure the Zigbee gateway is powered on and connected to the network.
- Verify that the button is within the effective range of the Zigbee gateway (25m open area).
- Attempt to re-pair the device with your Ewelink app.
- Cannot pair the device:
- Ensure you are using a compatible Ewelink Zigbee hub. The device is not compatible with Smart Life/Tuya apps.
- Make sure the button is in pairing mode (indicator flashing rapidly after a long press).
- Ensure the Zigbee hub is in pairing mode within the Ewelink app.
- Functionality with other platforms (e.g., Home Assistant, SmartThings):
- While officially stated to support Ewelink only, some users have reported success integrating this device with Home Assistant (ZHA) and SmartThings using specific drivers (e.g., zigbee-sonoff-button Edge Driver for SmartThings). However, this may require advanced configuration and is not officially supported.
8. User Tips
- Home Assistant (ZHA) Integration: Users have reported that this button works with ZHA (Zigbee Home Automation) in Home Assistant. It emits events for single click, double click, and long click. These events need to be manually added to your automations after obtaining the data and names from development settings. Note that the exposed switch control might not function directly.
- SmartThings Integration: Some users have successfully integrated the button with SmartThings by installing an Edge Driver, such as 'zigbee-sonoff-button'.
- Scenario Planning: Before setting up automations, plan out your desired scenarios for single, double, and long presses to maximize the utility of the button in your smart home.
9. Frequently Asked Questions (FAQ)
- Q: Does it work on the eWeLink app?
- A: Yes, this device is designed to work with the eWeLink app.
10. Warranty and Support
For warranty information and technical support, please refer to the official coolo website or contact your retailer. Keep your purchase receipt for warranty claims.
For additional guides and documents, including a user manual in PDF format, please refer to the seller's product page or contact customer support.