NOPARDE JGSW

Contents

NOPARDE JGSW Laser Water Ripple Projector Light User Manual

Model: JGSW | Brand: NOPARDE

1. Introduction

This manual provides detailed instructions for the safe and effective use of your NOPARDE JGSW Laser Water Ripple Projector Light. This dynamic lighting effect is designed to create captivating water ripple patterns, perfect for enhancing the atmosphere at parties, KTVs, bars, DJ events, discos, and various indoor and outdoor settings.

The projector features dynamic color changing, multiple light modes, and DMX512 support for advanced control. Please read this manual thoroughly before installation and operation.

Dynamic Laser Water Ripple Light projecting blue ripples on an outdoor bridge
Dynamic Laser Water Ripple Light creating an immersive outdoor atmosphere.

2. Safety Precautions

  • Installation Environment: Non-waterproof lamps and lanterns should not be installed in outdoor places where they can be exposed to rain. Lamp failure due to improper installation will not be covered by warranty service.
  • Disassembly: Do not attempt to disassemble the product yourself. If there is any problem, please contact customer service. Unauthorized disassembly will void the warranty.
  • Waterproof Seal: For waterproof models, ensure the "waterproof fixing iron ring" is tightened securely. Failure to do so may lead to water penetration, affecting projection quality and causing lamp failure.
  • Power Off: Always power off the device before performing any maintenance or adjustments, such as changing color chips.
  • Heat Warning: After the lamp operates for a long time, the temperature of the color chip can be high. Exercise caution to avoid burns.
  • Wiring: For wiring customers, you can directly cut off the plug to connect the two plugs regardless of the positive and negative poles. The ground wire is typically red for positive and blue for negative.

3. Specifications

FeatureSpecification
Product NameLaser Water Ripple Projector
Model NumberJGSW
Brand NameNOPARDE
Item TypeStage Lighting Effect
OccasionProfessional Stage & DJ
Power (W)30W (20W variants available)
Voltage90-240V
Nominal Voltage220V
Power SourceAC
Is Bulbs IncludedYes
Luminous Flux2000-82000
Projection Ratio1:1.6 Large Format
Projection Distance1-25m (in dim environment)
Light Source Lifespan≥10000H
Light Source TypeLaser technology
Adjustable Bracket AngleLeft-Right (0-180°), Up-Down (0-180°)
Laser LevelClass 3B
Installation MethodSelf-contained (Surface Mount, Ceiling/Wall/Floor Mount)
Waterproof LevelAll-in-one waterproof (IP67)
Dimensions (L x W x H)26 x 18 x 12.5 cm
Appearance ColorBlack
CertificationCE
StyleDMX Stage Light
Working Environment Temperature-40°C ~ 60°C
Product dimensions diagram showing length, width, and height of the projector
Product Dimensions and Specifications Overview.

4. Setup and Installation

4.1 Mounting the Lamp

Use the provided screws to fix the bracket to the desired surface. The projector can be mounted on the ceiling, wall, or placed on the ground.

Diagram showing various mounting options: ceiling, wall mount, and ground placement for the projector
Mounting options for the projector.

4.2 Initial Power-Up

  1. Plug the projector into a power outlet. The light will turn on automatically.
  2. If the light does not turn on, or for remote control functionality, use the provided remote to switch the light on/off.
Diagram showing power plug-in and remote control with 'Lights off' and 'Lights on' buttons
Power connection and remote control functions.

4.3 Adjusting Projection Clarity

After the light is on, adjust the clarity of the projection:

  1. Slowly twist the lens outwards while observing the clarity of the pattern. Continue twisting until the pattern is clear. Be careful not to drop the lens.
  2. Suggestion: First test the projection indoors, then install and fix it. After installation, fine-tune the lens to achieve the clearest pattern.
  3. Note: Different projection distances require readjustment. Avoid outdoor debugging during the day. Before adjusting the angle, unscrew the bracket counterclockwise, then tighten it again after adjusting the angle.
Diagram illustrating how to adjust the lens for projection clarity using a screw and twisting motion
Adjusting the projection lens for clarity.

5. Operation

The projector features a smart screen display and control buttons for intuitive operation. It offers 10 speed settings, 6 colors, and 3 light modes.

5.1 Control Panel Overview

Diagram of the projector's control panel with Function keys, Select buttons, and Confirm button
Smart Screen Display and Control Buttons.
  • Function Keys (1st from left): Select to adjust lighting mode, master-slave mode, or speed adjustment. 'A' starts master-slave mode, 'F' starts rotation adjustment mode.
  • Select Key (2nd from left): Use up/down selection keys. After adjusting the function key to the corresponding mode, use up/down to select the desired effect.
  • Select Key (3rd from left): Use up/down selection keys. After adjusting the function key to the corresponding mode, use up/down to select the desired effect.
  • Confirm Key (1st from right): After adjusting to your desired effect, press this key to save the program.

5.2 Dynamic Effects

The projector offers dynamic water ripple effects with various color options and movement patterns. It supports DMX512 for multi-unit synchronous linkage, allowing for complex color changes and synchronized displays.

Image showing multiple color mix options for the water ripple effect: Color Mix 1, Color Mix 2, Color Mix 3, Red Light, Green Light, Blue Light
Multiple light color changes and mixes.
Video demonstrating the dynamic water ripple effects and color changes.

6. Maintenance

6.1 Changing Color Chips

Follow these steps carefully when replacing color chips:

  1. Power Off: Always ensure the projector is powered off before attempting to change the color chip.
  2. Cool Down: If the lamp has been operating for a long time, the color chip's temperature will be high. Allow it to cool down to avoid burns.
  3. Remove Lens: Rotate and remove the front lens of the projector.
  4. Remove Fixing Ring: Carefully remove the lens fixing ring.
  5. Replace Color Chip: Replace the old color chip with the new one. Ensure the black side of the light sheet faces outwards.
  6. Secure: Fix the color plate with the fixing ring (iron wire) to prevent it from falling.
  7. Reinstall Lens: Install the lens back onto the lamp.
Diagram showing steps to remove lens, remove fixing ring, and place color chip for replacement
Steps for changing color chips.

7. Troubleshooting

  • No Light After Power-Up: Ensure the power cable is securely plugged in. If using the remote, check if the 'Lights on' button has been pressed.
  • Dim or Unclear Projection: Adjust the lens by twisting it slowly until the pattern becomes clear. Ensure the projection distance is appropriate for optimal clarity.
  • Water Penetration (Waterproof Models): If you notice water inside the unit, immediately power off and check if the "waterproof fixing iron ring" is securely tightened. Loose seals can lead to water damage.
  • Projection Quality Issues: If projection quality is affected, ensure the lens is clean and free from obstructions. If the issue persists after checking the lens and clarity adjustment, refer to the color chip replacement section.

8. User Tips

No specific user tips are available from customer reviews or Q&A for this product at this time.

9. Warranty and Support

9.1 Warranty Information

This product comes with a warranty card. Please retain it for future reference. The warranty covers manufacturing defects under normal use. Please note the following:

  • Lamp failure due to non-waterproof lamps being installed in outdoor, rain-exposed areas is not covered by warranty.
  • Disassembly of the product by the user will void the warranty.

9.2 Customer Support

If you encounter any problems with the product, please contact customer service immediately. Do not attempt to repair or disassemble the unit yourself.

A detailed user manual in PDF format is also available for download: View User Manual (PDF)

Maintenance DateMaintenance ReasonMaintenance ManInspectors
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.