LISHANDZ MX1002

Contents

LISHANDZ MX1002 10-Channel Audio Mixer User Manual

Model: MX1002

1. Introduction

The LISHANDZ MX1002 is an ultra-low noise 10-channel stereo audio mixer designed to combine multiple audio signals from various instruments and microphones into a single, mixed output. This versatile mixing console is ideal for musicians, audio engineers, and anyone needing to expand their audio input capabilities for musical instruments, guitar amplifiers, and other audio sources.

With its compact design and rich 5V power supply interfaces, the MX1002 offers flexibility for both studio and portable use.

LISHANDZ MX1002 10-Channel Instrument Audio Signal Mixer
Figure 1: MX1002 10-Channel Instrument Audio Signal Mixer - Ten In and One Out

2. Safety Information

  • Ensure the mixer is powered by a stable 5V-2A power source.
  • Do not expose the device to water or excessive moisture.
  • Avoid placing the device near heat sources or in direct sunlight.
  • Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
  • This device operates on low voltage (below 75V DC, below 50V AC) and does not contain a built-in battery.

3. Package Contents

Please check the package for the following items:

  • LISHANDZ MX1002 10-Channel Audio Mixer
  • Power Adapter (5V-2A)
  • User Manual (this document, and a PDF version is available online)

4. Product Overview

The MX1002 features ten input channels, each with independent level control and a Stereo/Mono switch, feeding into a single mixed output. A master output level control is also provided.

Front view of the LISHANDZ MX1002 10-channel stereo mixer
Figure 2: Front view of the MX1002 Mixer

4.1 Controls and Connections

Diagram of MX1002 mixer controls and ports
Figure 3: MX1002 Controls and Ports
  • INPUT1-INPUT10: 10 stereo/mono input jacks for connecting instruments or microphones.
  • LEVEL1-LEVEL10: Independent volume control knobs for each input channel.
  • MONO/STEREO Switches: Switches for each channel to select between mono or stereo input mode.
  • OUTPUT LEVEL: Master volume control for the overall mixed output.
  • OUTPUT: Mixed audio output jack.
  • POWER: Power indicator light.
  • 5V-2A GND: 5V Type-C power input port.
Function explanation of TRS Stereo and Mono inputs with switch detail
Figure 4: TRS Stereo and Mono Input Explanation
Rear view of MX1002 showing 10 microphone/instrument signal inputs and 1 mixed output
Figure 5: Rear view showing inputs and output

5. Setup

5.1 Power Connection

  1. Connect the provided 5V-2A power adapter to the 5V Type-C port on the mixer.
  2. Plug the power adapter into a suitable power outlet. The mixer can also be powered by a power bank, notebook, vehicle-mounted electricity, or a compatible battery via its 5V Type-C interface.
MX1002 mixer showing various 5V power supply options
Figure 6: Flexible 5V Power Supply Options
MX1002 mixer connected to a power adapter
Figure 7: Mixer connected to a power adapter

5.2 Audio Connections

  1. Connect your audio sources (e.g., violin, electronic drum, piano, microphone, computer, electronic organ, guitar) to the INPUT1-INPUT10 jacks using appropriate TRS cables.
  2. Connect the mixer's OUTPUT jack to your main mixer, amplifier, or recording device.
Connection diagram for MX1002 with various instruments and output to another mixer
Figure 8: Typical Connection Diagram

6. Operating Instructions

  1. Power On: Once connected to power, the POWER indicator light will illuminate.
  2. Set Input Mode: For each channel, use the MONO/STEREO switch to select the appropriate input mode based on your audio source.
  3. Adjust Individual Levels: Turn the LEVEL knobs (LEVEL1-LEVEL10) to adjust the volume for each connected instrument or microphone. Each channel can be individually adjusted for volume, allowing precise control over your mix.
  4. Adjust Master Output: Use the OUTPUT LEVEL knob to control the overall volume of the combined audio signal.

The MX1002 allows you to mix multiple signal outputs in the output channel, solving the problem of centralized output of multiple signals. You can control the tone as you please with the independent adjustment knobs.

Diagram explaining 10 channels mixed with 1 set of outputs and individual volume control
Figure 9: Mixing Concept - 10 Channels to 1 Output
Close-up of the independent adjustment knobs on the MX1002 mixer
Figure 10: Independent Adjustment Knobs

7. Maintenance

  • Clean the unit with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • Keep the unit free from dust and debris.
  • Store the mixer in a cool, dry place when not in use.
  • Ensure all cables are properly connected and not strained.

8. Troubleshooting

  • No Sound Output:
    • Check if the mixer is properly powered on (POWER indicator light).
    • Verify all audio cables are securely connected to inputs and output.
    • Ensure individual channel LEVEL knobs and the master OUTPUT LEVEL knob are turned up.
    • Check the volume settings on your connected audio sources and output device.
  • Distorted Sound:
    • Reduce the individual channel LEVEL knobs and the master OUTPUT LEVEL knob to prevent clipping.
    • Ensure the input signal from your audio source is not too strong.
    • Check the condition of your audio cables; faulty cables can cause distortion.

9. Specifications

Feature Specification
Model MX1002
Input Channels 10 (Microphone/Instrument, Stereo/Mono)
Output Channels 1 (Mixed Output)
Power Input 5V-2A (Type-C)
Voltage Range Low voltage non-USB (below 75V DC, below 50V AC)
Built-in Battery No
Inbox Adaptor Yes
Dimensions (W x H x D) 225mm x 25mm x 75mm (8.85 x 0.98 x 2.95 inches)
Dimensions diagram of the MX1002 mixer
Figure 11: MX1002 Dimensions

10. User Tips

  • Experiment with different input sources and their respective level settings to achieve your desired mix.
  • Utilize the Stereo/Mono switches to optimize the sound for each input type.
  • For portable use, a high-capacity power bank can provide extended operation time.

11. Warranty and Support

For detailed warranty information, technical support, and additional documentation, please refer to the official user manual PDF available online:

View User Manual (PDF)

This PDF contains comprehensive guides and documents for your item.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.