Safety Reminders
Please read this manual carefully before using the projector.
- A national standard power cable and power cord with grounding is suggested to ensure stable power supply.
- If you find the projector defective, do not attempt to repair it yourself. Please contact your distributor or the factory directly.
- Do not look directly at the lens while the projector is working.
- This product can only be repaired by professional technical personnel.
- Do not place any cloth, blanket, or other material that could block ventilation holes around the projector while it is working.
- This projector does not have a water-proof function. Do not place apparatuses such as vases or cups near the projector.
- If the projector will not be used for a long time, turn it off and disconnect the power supply. Use the factory original foam and other shockproof material for transport.
- It is normal for hot air or odor to come from the vent during use.
- For wired connections, it is suggested to use the original mobile data cable. For charging, use the original mobile charger.
Product Overview
The YT200 is a miniature portable projector designed for home use, offering high-definition projection and support for wired screen mirroring from mobile devices.
Product Details and Interfaces
| No. | Interface/Button | Function |
|---|---|---|
| 1 | USB | USB input for media files or wired connection. |
| 2 | 5V IN (Micro USB) | Power input (DC 5V 2A). |
| 3 | IR Input | Infrared receiver for remote control. |
| 4 | Earphone | 3.5mm audio output. |
| 5 | Power Key | Long press to turn on/off. |
| 6 | ESC | Escape/Back button. |
| 7 | Right | Navigation right. |
| 8 | OK | Confirm selection. |
| 9 | Left | Navigation left. |
| 10 | Input | Select input source. |
| 11 | Focus | Adjust image focus. |
| 12 | Lens | Projection lens. |
| 13 | Fix Hole | Mounting point. |
Remote Control
| No. | Button | Function |
|---|---|---|
| 1 | Mute | Mute/unmute audio. |
| 2 | Power/off | Power on/off. |
| 3 | Last/FB | Previous track/Fast backward. |
| 4 | Play/Pause | Play/pause media. |
| 5 | Next/FF | Next track/Fast forward. |
| 6 | UP | Navigation up. |
| 7 | OK | Confirm selection. |
| 8 | Left | Navigation left. |
| 9 | Right | Navigation right. |
| 10 | Down | Navigation down. |
| 11 | Menu | Access menu. |
| 12 | ESC | Escape/Back. |
| 13 | Vol - | Decrease volume. |
| 14 | Vol + | Increase volume. |
| 15 | Input | Select input source. |
Setup and Initial Use
1. Powering On/Off
Power Supply: Use a power bank or a cellphone power adapter (must be 5V 2A) to connect to the projector's Micro USB port. Once connected and the power source is on, the projector will enter standby status.
Operation:
- Button Control: Long press the power button on the projector to turn it on/off from standby.
- Remote Control: Press the power on/off key on the remote control to turn the projector on/off from standby.
2. Focus Adjustment
Place the projector with its lens vertical to the wall or screen. Turn on the projector and then adjust the focus adjusting handle (part 11 on the projector diagram) until the projected image is clear.
3. Wired Screen Mirroring (Phone Connection)
The projector supports wired screen mirroring for both Android and iOS devices. Use the original mobile data cable for the best connection.
Android Wired Connection
- Click the "Input" button on the projector or remote control to select "Wirecast".
- Connect your Android phone to the projector's USB port using your original mobile data cable.
- If prompted, click "View" to download the necessary app.
- Click "Download" to start the app download.
- Click "Install" to install the app.
- Click "Open" to launch the app.
- On your phone, click "Ok" when prompted to allow the app to access the USB accessory.
- Click "Allow" when prompted to allow the app to record/project the screen.
- Click "Allow" when prompted to allow the app to access photos, media, and other files.
- Click "Open" to allow the app to modify system settings.
- Click "Open" to enable write system settings for the app.
- If the screen is not synchronized successfully, unplug the USB cable and reinsert it.
- Click "OK" when prompted to open Drongscreen.
- Click "Allow" when prompted to allow Drongscreen to record/project the screen.
- The screen mirroring should now be complete.
iOS Wired Connection
- Click the "Input" button on the projector or remote control to select "Wirecast".
- Connect your iPhone/iPad to the projector's USB port using your original mobile data cable.
- On your iPhone/iPad, click "Trust" when prompted.
- Enter your mobile passcode if required.
- The screen mirroring should now be complete.
Video demonstrating the iOS wired screen mirroring process.
Operating Instructions
1. Media Playback (USB Input)
Insert a USB drive into the projector's USB port. Select the appropriate icon (Movie for video, Photo for pictures, Music for audio, E-book for TXT files) from the main menu and press OK to display/play content.
| Category | Format Type | Supported Formats |
|---|---|---|
| Multimedia | Audio | MP3/APE/OGG/AAC/FLAC/ATRA |
| Photo | JPEG/BMP/PNG/GIF | |
| Video | MKV/AVI/MOV/MP4/TS/ASF/FLV/PMP/MPG/VOB/WMV | |
| E-book | TXT |
2. Earphone Connection
Connect 3.5mm earphones or external audio devices to the earphone port (part 4 on the projector diagram) for private listening or enhanced audio output.
Maintenance
- Keep the projector's lens clean. Use a soft, lint-free cloth specifically designed for optical lenses.
- Ensure ventilation holes are not blocked during operation to prevent overheating.
- When not in use, turn off the projector and disconnect it from the power source.
- For transport, use the original packaging or other shockproof materials to protect the device.
Troubleshooting
- No Projection/Black Screen: Ensure the power supply is connected correctly (5V 2A). Check the input source selection. If using wired mirroring, ensure the cable is securely connected and all prompts on your phone are accepted.
- Unclear Image: Adjust the focus ring (part 11 on the projector diagram) until the image is sharp. Ensure the projection surface is flat.
- No Sound: If using wired mirroring with an Android phone, the sound signal is played by the phone itself. For other inputs, check the volume settings on both the projector and any connected external audio devices. Ensure earphones are fully plugged in.
- Wired Mirroring Issues (Android): If the screen does not synchronize or the download prompt doesn't appear, try unplugging and re-plugging the USB cable. Ensure all app permissions are granted as per the instructions.
- App/Streaming Service Not Projecting: Netflix or other apps with projection permissions may encrypt streaming videos, which can result in unsuccessful projection. This is a limitation of the content provider, not the projector.
- Phone Compatibility: The YT200 projector does not support Xiaomi phones or Motorola phones for wired screen mirroring.
- Projector Overheating/Odor: It is normal for some hot air or odor to come from the vent during use. If overheating is severe, ensure ventilation is not blocked and allow the projector to cool down.
- Device Malfunction: Do not attempt to repair the projector yourself. Contact your distributor or the factory for assistance.
Specifications
| Feature | Detail |
|---|---|
| Image System | TFT LCD |
| Optical Resolution | 640x480dpi (Native), 320x180 (Display Size) |
| Max Supported Resolution | 1920x1080 (1080p) |
| Light Source | LED (30,000 hours service life) |
| Power Consumption | 10W |
| Lens | Multichip lens |
| Projection Distance | 0.6 - 4.0m |
| Projected Dimension | 20 - 100 inches (14 - 100 inches) |
| Product Size | Ø110 x 47mm |
| Net Weight (N.W) | 200g |
| Aspect Ratio | 16:9 / 4:3 |
| Input | USB (5-20V DC) |
| Output | 3.5mm Earphone Out |
| Speaker | 4Ω2W (Built-in) |
| Operation | Manual |
| Remote Controller Included | Yes |
| Battery | No (Remote control requires 1x 2032 button cell) |
| Bluetooth-compatible | No |
| Use | Home |
| Type | Short-Focus |
| Home Theater Projector | Yes |
| Certification | CE |
| Origin | Mainland China |
Warranty and Support
The original factory provides a one-year free warranty from the date of purchase. Maintenance after one year will be charged.
When claiming warranty service, the warranty card and proof of purchase must be provided to the maintenance unit. An incomplete or altered warranty card will not be granted warranty service.
Conditions Not Covered by Free Warranty:
- Failure or damage caused by improper installation, use, or storage.
- Failure or damage caused by unauthorized disassembly and repair.
- Damage due to force majeure (e.g., flood, fire, earthquake, lightning, grid failure).
For more warranty information or to report a defect, please consult your agent or distributor.
User Tips
- For optimal viewing, use the projector in a dark room.
- Experiment with different projection distances to find the ideal screen size for your space.
- Always use the original charging cable and a 5V 2A power adapter or power bank for stable performance.
- When connecting to a phone, ensure your phone's screen is unlocked and you accept all trust/permission prompts.
- Consider using external speakers via the 3.5mm audio jack for a more immersive audio experience, especially with Android wired mirroring where phone audio is used.
Package Contents
The YT200 projector package includes:
- Projector x 1
- Remote control x 1
- USB cable x 1
- User manual x 1
- Color Box x 1
- Foam box x 1
- Parcel bag x 1