ICCSSI P01-205

Contents

ICCSSI P01-205 Intelligent Door Lock User Manual

Model: P01-205 | Brand: ICCSSI

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your ICCSSI P01-205 Intelligent Door Lock. This smart lock offers multiple unlocking methods including fingerprint, password, IC card, mechanical key, and remote access via the Tuya Smart Life App. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Safety Information

  • Do not use an electric screwdriver during installation to avoid damaging components.
  • Keep fingers and the sensing area clean and dry when inputting fingerprints.
  • For emergency situations, always keep a mechanical key hidden in a safe, accessible location outside the door.
  • This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference and must accept any interference received.
  • Do not use lithium batteries or non-rechargeable batteries that are not specified for this device.

Package Contents

Verify that all the following components are included in your package:

Diagram of included accessories for the smart lock

Image: Diagram showing all included accessories: Exterior Assembly, Interior Assembly, Latch, Strike Box, Strike Plate, Screws (A, B, C), Keys, IC Cards.

  • Exterior Assembly (x1)
  • Interior Assembly (x1)
  • Latch (x1)
  • Strike Box (x1)
  • Strike Plate (x1)
  • Screw A (x4)
  • Screw B (x2)
  • Spare Screw C (x2)
  • Key (x2)
  • IC Card (x2)

Tool Required: Screwdriver (Do not use an electric screwdriver during installation).

Specifications

Feature Specification
Brand Name ICCSSI
Model Number P01-205
Material Aluminium alloy
Power Supply DRY BATTERY (4x AAA batteries, not included)
Connectivity Bluetooth (Tuya Smart Life App)
Ways To Unlock App, Remote Control, Bluetooth, Mechanical Keys, Card, Password, Fingerprint
Suitable Door Type Steel Door, Wooden Door, Brass Door, Stainless Steel Door, Other (Supports 99% of door type installations)
Installation Method Punch-free installation
Handle Direction Direction Reversible
Fingerprint Capacity 50 PCS
Password Capacity 50 PCS
IC Card Capacity 50 PCS
Voltage Range 4.6-6.5V
Working Current < 500mA
Low Power Warning 4.8±0.2V
Certification FCC
Smart Home Platform Tuya
Detailed dimensions of the latch mechanism

Image: Detailed dimensions of the latch mechanism (85mm length, 60mm backset, 57mm height, 25mm width, 23mm height, 11mm depth).

Smart lock compatibility with various door types and lock hole sizes

Image: Smart lock installed on different door types, indicating support for 99% of door installations and compatibility with 65mm (or less) ball lock hole coverage.

Setup and Installation

Before beginning installation, ensure your door meets the following specifications:

  1. Check Door Dimensions:
    • Door thickness: 35mm to 54mm (1 3/8" to 2 1/8").
    • Hole in the door: 54mm (2 1/8").
    • Backset: 60mm or 70mm (2 3/8" or 2 3/4").
    • Hole in the door edge: 25mm (1").
  2. Install Latch & Strike Plate:
    • Install the strike box and strike plate into the door frame using Screw A.
    • Adjust the latch backset to either 60mm or 70mm to fit your door hole by pressing the square-shaped hole to pull the latch.
    • Install the latch into the door and tighten with Screw A. Ensure the bevel of the latch aligns with the bevel of the strike plate.
    Diagram showing lock body size adjustment from 60mm to 70mm

    Image: Diagram showing the lock body size adjustment from 60mm to 70mm.

  3. Identify Left/Right Hand Door:
    • For a right-hand door, ensure the lever is in the correct position and tighten screw E as shown in the manual's diagram.
    • For a left-hand door, ensure the lever is in the correct position and tighten screw E as shown in the manual's diagram.
  4. Remove Battery Cover:
    • Loosen the 2 pcs of screw C to disassemble the battery cover from the interior assembly.
  5. Install Exterior Assembly:
    • Insert the spindle through the square-shaped hole in the latch.
    • Guide the standoffs through the circular holes in the latch.
  6. Install Interior Assembly:
    • Connect the control wire male plug to the female socket.
    • Align the standoffs of the interior assembly with the exterior assembly.
    • Insert 2 pcs of screw B and tighten them to secure the interior assembly.
  7. Install Batteries:
    • Load 4 AAA batteries into the battery compartment, observing positive and negative poles.
    • Tighten the 2 pcs of screw C to secure the battery compartment.

For detailed diagrams and complete installation instructions, please refer to the full user manual PDF available here.

Operating Instructions

1. Register Your Account (Tuya Smart Life App)

  1. Download the "Smart Life" App from Google Play or Apple App Store.
  2. Register or Log in to your account within the app.

2. Pairing the Lock with the App

  1. Enable Bluetooth and Wi-Fi or Mobile Network on your phone (within 3 meters of the lock).
  2. Tap "Add device" in the app and touch the fingerprint screen or keypad on the lock to activate it for automatic search.
  3. After successful connection, you can rename the lock or click "Done" to complete pairing.

3. Unlocking Methods

Diagram illustrating various unlocking methods and Tuya App features

Image: Diagram illustrating various unlocking methods and features: APP Bluetooth, Fingerprint, Password, Key, IC Card, Rechargeable Lithium Battery, Normally Open Mode, Usage Record, Emergency Interface. Also shows Tuya APP scan and download QR codes.

  • Fingerprint Unlocking: Close-up of fingerprint unlocking mechanism

    Image: Close-up of the fingerprint unlocking mechanism, highlighting 99.9% recognition rate and 0.5s unlock speed.

    Place your registered finger on the fingerprint reader. The lock will unlock in approximately 0.5 seconds with a 99.9% recognition rate.

  • Password Unlock: Hand entering password on keypad

    Image: Hand entering a password on the keypad for unlocking. Mentions fingerprint, password, and card capacity of 100 each.

    Enter your registered 6-10 digit password on the keypad, followed by the '#' key. The initial password is 0123456.

  • IC Card Unlock:

    Tap your registered IC card on the sensing area of the lock.

  • Key Unlock: Smart lock with mechanical key inserted

    Image: Smart lock with a mechanical key inserted, illustrating the key unlock method. Recommends keeping a spare key outside for emergencies.

    Insert the mechanical key into the keyhole and turn it 120 degrees to open the door. This is recommended for emergency use.

  • App Bluetooth Unlocking:

    Open the Smart Life App, select your lock, and use the unlock function (hold and drag the unlock icon).

  • Temporary Code:

    Generate custom, dynamic, or one-time codes through the Smart Life App. Follow the app's instructions for creation and usage. Dynamic codes are valid for 5 minutes, one-time codes for 6 hours and can only be used once.

  • Emergency Power Supply: Type-C emergency power supply connection

    Image: Image demonstrating the Type-C emergency power supply, showing a power bank connected to the lock. This interface is for emergency power only and does not charge the lock.

    If the battery runs out, connect a power bank to the Type-C emergency power port on the lock to provide temporary power and open the door. This port is for emergency power only and does not charge the lock's internal battery.

4. Lock Modes

  • Normal Mode: The lock automatically locks 5 seconds after unlocking. Both Admin and shared members can unlock.
  • Passage Mode: The lock remains unlocked until manually locked. Auto-lock is disabled in this mode.
  • Privacy Mode: Only Admin and shared members can unlock via the Smart Life App. Only Admin can unlock with fingerprints and codes.

5. Member Management (App)

In the Smart Life App, select "Member Management" to add, share, or remove members (Common Member/Administrator).

6. Fingerprint Input

  • Keep fingers and the sensing area clean and dry.
  • For improved recognition, especially for children or elderly users, create multiple fingerprint files from different angles.
  • Fingerprints are stored locally on the device for privacy.

7. Code Input

In the app, tap "Add code" and enter a 6-10 digit password, then set a code name.

  • Save your password securely; the app will not display it.
  • End password entry with '#' for correct input.
  • If you make a mistake, tap '*' and re-enter.

Maintenance

  • Battery Replacement: When the buzzer beeps once and the low power indicator flashes red for 10 seconds after unlocking, it's time to replace the batteries. Use 4 new AAA dry batteries.
  • Cleaning: Regularly wipe the fingerprint sensing area and keypad with a soft, dry cloth to ensure optimal performance. Avoid using abrasive cleaners or solvents.
  • Factory Reset: To restore factory settings, rotate the thumb turn from 'locked' to 'unlocked' and back 5 times. A long beep and green flash indicate a successful reset. All fingerprints will be deleted, and an Admin must be added via the Smart Life App.

Troubleshooting

  • Lock not responding / Battery dead: Use the mechanical key or connect a power bank to the Type-C emergency power port. Replace batteries promptly when the low power indicator appears.
  • Fingerprint recognition failure: Ensure your finger and the sensor are clean and dry. Try re-registering your fingerprint from different angles, especially for children or elderly users.
  • Password entry errors: Always end your password with '#'. If you make a mistake, press '*' to clear and re-enter the password.
  • App connectivity issues: Ensure Bluetooth and Wi-Fi are enabled on your phone and you are within 3 meters of the lock. Check if the lock is already paired with another device.
  • Remote unlocking not working: Remote unlocking requires a gateway connection. Ensure your gateway is properly set up and connected.

User Tips

  • Spare Key Location: Always keep at least one mechanical key in a secure, accessible location outside your home for emergencies.
  • Battery Life: Monitor the low power indicator and replace batteries proactively to avoid being locked out.
  • Fingerprint Enrollment: For better reliability, enroll multiple fingerprints for each user, varying the angle slightly during enrollment.
  • Password Security: Change the default password immediately after installation. Use strong, unique passwords and avoid sharing them.
  • App Features: Explore the Tuya Smart Life App for advanced features like usage records, temporary codes, and remote management.

Warranty and Support

For warranty information and technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

For further details and comprehensive diagrams, please refer to the official user manual PDF: ICCSSI P01-205 User Manual PDF.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.