MYOSLIM CLS

Contents

Myoslim Neo Portable EMS Machine User Manual

Model: CLS

1. Introduction

The Myoslim Neo Portable EMS Machine is an advanced electromagnetic muscle stimulator designed for body sculpting, fat removal, muscle building, and weight loss. It utilizes high-intensity focused electromagnetic field energy technology to induce supramaximal muscle contractions, providing an efficient and non-invasive method for body contouring.

This manual provides essential information for the safe and effective use of your Myoslim Neo device. Please read it thoroughly before operation.

Front view of Myoslim Neo EMS Machine with screen displaying treatment patterns.
Figure 1: Front view of the Myoslim Neo EMS Machine.

2. Safety Information

Your safety is paramount. The Myoslim Neo EMS Machine is designed to be safe and non-invasive. It complies with EN IEC 60335-1 & EN IEC 60335-2-23 and EN 62233 standards for household and similar electrical appliances, specifically for skin or hair care and human exposure to electromagnetic fields.

General Safety Guidelines:

  • Ensure the device is used in a dry environment. The device has an IPX0 rating, meaning it is not protected against water ingress.
  • Do not use the appliance near water, in bathtubs, basins, or other vessels containing water.
  • The device operates on AC 220V 50/60Hz 10A. Ensure your power supply matches these specifications.
  • The device is non-current, non-hyperthermia, and non-radiation, ensuring a safe treatment experience.
  • Always follow the recommended operating procedures to prevent any potential hazards.
  • No user-serviceable parts are intended to be removed without tools.
Certificates for quality assurance and compliance.
Figure 2: Quality Assurance Certificates.

3. Product Overview and Components

The Myoslim Neo machine consists of a main unit with a diversified touch screen interface and various handles/applicators for different body areas.

Main Unit:

  • Control Panel: Large touch screen for operation, displaying patterns, time, frequency, and energy levels.
  • Power Input: Located at the rear of the machine.
  • Cooling Fans: Located at the rear for heat dissipation.
Front view of the Myoslim Neo EMS Machine.
Figure 3: Front view of the main unit.
Side view of the Myoslim Neo EMS Machine.
Figure 4: Side view of the main unit.
Back view of the Myoslim Neo EMS Machine showing power input and cooling fans.
Figure 5: Back view of the main unit.

Applicators (Handles):

The machine comes with various handles designed for different treatment areas. These handles deliver the electromagnetic energy to stimulate muscles.

  • Standard Handles: Typically used for larger muscle groups like the abdomen, thighs, and buttocks. Available in configurations of 2, 4, or 5 RF handles.
  • Cushion Handle: A specialized applicator for specific areas.
Various components of the Myoslim Neo EMS Machine, including the main unit, handles, straps, and cushion applicator.
Figure 6: Myoslim Neo components including main unit, handles, straps, and cushion.
Cushion handle applicator.
Figure 7: Cushion handle applicator.

4. Setup Instructions

  1. Unpacking: Carefully remove all components from the packaging.
  2. Placement: Place the main unit on a stable, flat surface in a well-ventilated area.
  3. Power Connection: Connect the power cable to the power input at the rear of the machine and then to a suitable AC 220V 50/60Hz 10A power outlet.
  4. Attaching Applicators: Connect the desired handles (e.g., 2, 4, or 5 RF handles, or cushion handle) to the designated ports on the machine. Ensure they are securely attached.
  5. Securing Applicators: Use the provided straps to securely attach the black energy-emitting area of the handle to the target body part. Ensure a tight fit for optimal contact.
Video 1: Demonstration of attaching the handle and navigating the machine interface.

5. Operating Instructions

The Myoslim Neo features a user-friendly touch screen interface for easy operation.

Interface Navigation:

  • Turn on the machine using the power button.
  • The main interface offers two patterns: Pattern 1 and Pattern 2.
  • Pattern 1: This mode has pre-set frequencies. You only need to adjust the RF and energy levels, ensuring consistency.
  • Pattern 2: This mode allows for free frequency adjustment (F1, F2, F3) and higher flexibility during operation. Low frequencies are suitable for exercising large muscles, while high frequencies are for smaller muscles.
Diversified touch screen interface showing various settings and options.
Figure 8: Diversified touch screen interface.

Treatment Settings:

For optimal results and user comfort, follow these general guidelines:

  • Warm-up Phase: Start with 20-30% energy for the first 5 minutes.
  • Exercise Phase: Increase energy to 60-80% for 20 minutes.
  • Cool-down Phase: Gradually reduce energy to 10-30% for the last 5 minutes.
  • The specific energy settings can be increased from low to high based on the user's tolerance.
  • For Pattern 2, it is suggested to gradually increase F1, F2, and F3 percentages from low to high. Suggested percentages: F1: 10-20%, F2: 20-30%, F3: 30-40%.
Comparison of old and new interface designs, highlighting new features like waterproof switch and language support.
Figure 9: New interface design with improved features.

Treatment Areas:

The Myoslim Neo machine is suitable for various body parts:

  • Abdomen
  • Buttocks
  • Arms
  • Thighs
  • Legs
  • Hips
Diagram illustrating muscle contractions for body sculpting, showing outline beauty and peach butt shaping.
Figure 10: EMS body sculpting for muscle definition.

6. Maintenance

  • Cleaning: Clean the appliance after each use to prevent the accumulation of grease and other residues. Use a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Storage: Store the machine in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Care: Ensure power cables and applicator hoses are not twisted or kinked during storage to prevent damage.
  • Inspection: Periodically inspect the machine and its components for any signs of wear or damage. If any issues are found, contact customer support.

7. Troubleshooting

If you encounter any issues with your Myoslim Neo machine, please refer to the following common troubleshooting steps:

  • Machine Not Turning On:
    • Check if the power cable is securely connected to both the machine and the power outlet.
    • Ensure the power outlet is functional.
  • No Muscle Stimulation:
    • Verify that the applicators are securely attached to the machine and tightly strapped to the body part.
    • Check the energy settings on the touch screen to ensure they are not set too low.
    • Ensure the correct pattern (Pattern 1 or Pattern 2) is selected and activated.
  • Unusual Noises/Overheating:
    • Ensure the cooling fans at the back of the machine are not obstructed.
    • If the machine continues to make unusual noises or overheat, power it off immediately and contact customer support.

For issues not listed here, please contact customer service for assistance.

8. Specifications

Feature Specification
Brand Name MYOSLIM
Model CLS
Item Type Massage & Relaxation
Technology EMS Electrical Muscle Stimulation
Power 6500W
Tesla Intensity 15 Tesla
Frequency 5-200HZ
Voltage 110V / 220V AC (50-1000V AC)
Power Supply Alternating Current
Material ABS
Handles 2 Handles / 4 Handles / 5 Handles (RF handles)
Function Body Slimming, Muscle Building, Fat Removal
Treatment Area Body, Legs, Arms, Abdomen, Hips
Weight 40KG
Size Small, 58*63*54cm
Certification CE
Origin Mainland China
IP Rating IPX0 (No protection against water ingress)

9. User Tips

  • For best results, consistent use as per the recommended treatment schedule (e.g., 4 treatments within two weeks, 30 minutes each) is advised.
  • Always start with lower energy settings and gradually increase based on your comfort and tolerance.
  • Ensure the applicators are in full contact with the skin and securely fastened to maximize effectiveness.
  • Consider combining treatments with a healthy lifestyle for enhanced body sculpting and weight loss benefits.
  • The machine supports multiple languages; you can customize the system language as needed.

10. Warranty and Support

  • Warranty: The company guarantees all equipment for 1 year from the date of purchase.
  • After-sales Service: Online support and video technical support are provided.
  • Customization: Special customized services such as changing system language, adding logo, different color chassis, or adding replaceable handles may be available upon consultation with the seller.
  • Returns: Due to the particularity of the goods, products do not support 14-day no-reason returns. Please contact the seller to confirm the integrity of the item if a return is necessary.
  • For any questions or support, please consult our customer service staff online.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.