SEamopar Wired Gaming Headset

Contents

SEamopar Wired Gaming Headset

User Instruction Manual

1. Introduction

Thank you for purchasing the SEamopar Wired Gaming Headset. This headset is designed to provide a high-fidelity audio experience with a clear microphone for communication during gaming or calls. It features an ergonomic design for comfort during extended use and is compatible with various devices including PS4, PS5, smartphones, and computers.

2. Safety Information & FCC Compliance

Warning: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

3. Package Contents

  • Gaming Headset x 1
  • (Optional: 1-to-2 adapter cable for desktop computers, if included with your specific model)

4. Product Overview

Familiarize yourself with the key components of your SEamopar Gaming Headset:

Diagram showing headset components: Lightweight Headband, Adjustable Headband, High-Grade 40mm Driver, Breathable Earmuff, Omnidirectional Microphone.
Figure 1: Headset Configuration Diagram
  • Lightweight Headband: Designed for comfort during long sessions.
  • Adjustable Headband: Allows for a customized fit.
  • High-Grade 40mm Driver: Delivers super bass and excellent sound performance.
  • Breathable Earmuff: Soft ear cushions for extra comfort and passive noise isolation.
  • Omnidirectional Microphone: Adjustable and retractable, designed for clear voice pickup.
Close-up of comfortable earmuffs, inline volume control and mic mute switch, and the 3.5mm audio/mic plug.
Figure 2: Earmuff, Inline Control, and 3.5mm Plug Details
  • Comfortable Earmuffs: Soft padding for extended wear.
  • Volume Control & Mic Mute: Inline controls for easy audio management.
  • 3.5mm Audio & Mic Plug: Standard connector for wide compatibility.
Diagram showing the 130-degree retractable omnidirectional microphone and its 'Magic Voice' feature for clear and noise-isolated audio.
Figure 3: Omnidirectional and Retractable Microphone

The microphone is 130° retractable and offers 360° voice pickup for clear communication.

Image showing the headset's ergonomic adaptive headband, highlighting its flexibility and comfort.
Figure 4: Extreme Ergonomic Adaptive Headband

The headband is designed to be extremely ergonomic and adaptive for various head sizes.

Diagram showing headset dimensions (190mm width, 195mm height, 86mm ear cup depth) and features like cool appearance, rotatable microphone, stretchable headband, and cozy ear cushion.
Figure 5: Headset Dimensions and Comfort Features

5. Setup Instructions

5.1. 3.5mm 4-PIN (Single Plug) + USB Headset Connection

This connection type is suitable for devices with a single 3.5mm audio jack that supports both audio and microphone input (e.g., laptops, tablet PCs, mobile phones, PS4/PS5, Nintendo Switch).

  1. Plug the 3.5mm 4-PIN connector into the audio/microphone jack of your device.
  2. (Optional) Plug the USB connector into a USB port on your device. The USB connection is solely for powering the LED lights on the headset and does not affect microphone or sound functionality. If your headset does not have LED lights, it will not have a USB connector.
  3. For desktop computers, if your computer has separate audio and microphone jacks, you may need a 1-to-2 adapter cable (not always included, may require separate purchase).
Wiring diagram for 3.5mm 4-PIN (single plug) headset with optional USB for LED, connecting to various devices like laptops, phones, and consoles.
Figure 6: 3.5mm 4-PIN (Single Plug) + USB Connection Diagram

5.2. USB Headset Connection (If applicable)

If your headset model is a dedicated USB headset, it is applicable to USB interface audio devices such as laptops, desktop computers, PS4/PS5 consoles, etc.

  1. Plug the USB connector directly into an available USB port on your device.
Wiring diagram for a USB headset connection to a computer or console.
Figure 7: USB Headset Connection Diagram

5.3. 3.5mm 3-PIN (Dual Plug) + USB Headset Connection

This connection type is primarily for desktop computers with separate 3.5mm jacks for audio output and microphone input.

  1. Plug the microphone 3.5mm plug into the device's microphone interface (often marked with a microphone icon or colored red/pink).
  2. Plug the audio 3.5mm plug into the device's audio output interface (often marked with a headphone icon or colored green).
  3. (Optional) Plug the USB connector into a USB port on your device. The USB connection is solely for powering the LED lights on the headset and does not affect microphone or sound functionality. If your headset does not have LED lights, it will not have a USB connector.
Wiring diagram for 3.5mm 3-PIN (dual plug) headset with optional USB for LED, connecting to a desktop computer.
Figure 8: 3.5mm 3-PIN (Dual Plug) + USB Connection Diagram

6. Operating Instructions

  • Volume Control: Use the inline flywheel volume control to adjust the audio output level.
  • Microphone Mute: Use the inline one-key mic mute switch to quickly turn the microphone on or off.
  • Microphone Adjustment: The omnidirectional microphone can be rotated and retracted up to 130° for optimal positioning and storage.
  • Headband Adjustment: Adjust the headband to fit comfortably on your head.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the headset. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Care: Avoid sharp bends or excessive pulling on the cable to prevent damage.
  • Earmuffs: The breathable earmuffs are designed for durability, but gentle handling will prolong their life.

8. Troubleshooting

Problem Possible Cause Solution
No sound from headset Incorrect connection; Volume too low; Device audio settings.
  • Ensure the 3.5mm plug is fully inserted into the correct port.
  • Check the inline volume control and increase it.
  • Verify your device's audio output settings are set to the headset.
  • If using an adapter, ensure it is correctly connected.
Microphone not working Microphone muted; Incorrect connection; Device microphone settings; Microphone damage.
  • Ensure the inline mic mute switch is in the 'unmuted' position.
  • For dual 3.5mm plugs, ensure the microphone plug is in the correct mic input jack.
  • Check your device's microphone input settings and select the headset.
  • Test the microphone on another device if possible to rule out device-specific issues.
Headset LED lights not working USB not connected; USB port issue.
  • Ensure the USB plug is securely connected to a powered USB port.
  • Try a different USB port.
Headset feels too small/uncomfortable Improper adjustment.
  • Adjust the stretchable headband to its maximum extension.
  • Ensure earcups are properly positioned over your ears.

9. Specifications

Feature Detail
Item Type Gaming Headset
Speaker Diameter 40mm
Frequency Range 20-20,000Hz
Sensitivity 112 ± 3dB at 1kHz
Impedance 24 Ohm at 1kHz
Maximum Input Power 30mW
Microphone Sensitivity -54dB ± 3dB
Microphone Frequency Range 5-10kHz
Microphone Impedance 2.2k Ohm at 1kHz
Cable Length Approx. 1.8m
Material Plastic
Communication Wired
Style Neckband headphones
Active Noise-Cancellation Yes
Volume Control Yes
Control Button No (Inline control)

10. User Tips

  • Microphone Check: If your microphone isn't working, double-check the inline mute switch and ensure it's not accidentally activated. Also, confirm your device's audio settings are correctly configured to use the headset's microphone.
  • Comfort Adjustment: If the headset feels tight, fully extend the adjustable headband and ensure the earcups are positioned correctly over your ears for optimal comfort during long gaming sessions.
  • Connection Stability: For consistent performance, ensure all plugs (3.5mm and USB) are firmly seated in their respective ports. Intermittent issues might indicate a loose connection.

11. Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact the seller directly through your purchase platform. Keep your proof of purchase for warranty validation.

A PDF user manual is available for download at this link for additional details and diagrams.

© 2023 SEamopar. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.