SEamopar I8

Contents

I8 2.4GHz Wireless Keyboard with Touchpad

Model: I8 | Brand: SEamopar

1. Introduction

Thank you for purchasing the SEamopar I8 2.4GHz Wireless Keyboard with Touchpad. This compact and versatile device combines a full QWERTY keyboard, a multi-touch touchpad, and multimedia control keys, making it ideal for controlling PCs, smart TVs, Android TV boxes, laptops, projectors, and other compatible devices. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance.

2. Important Safety Information

WARNING: Ingestion Hazard

  • This product contains a button cell or coin battery.
  • DEATH or serious injury can occur if ingested.
  • A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
  • KEEP new and used batteries OUT OF REACH of CHILDREN.
  • Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
  • Immediately dispose of used batteries and keep away from children. Do NOT dispose of batteries in household trash.

Always keep the product in its original package until ready to use.

3. Package Contents

Please check the package for the following items:

  • 1 x I8 Wireless Keyboard (English Layout, No Backlit)
  • 1 x USB Wireless Receiver
  • 1 x User Manual (this document)

4. Setup Guide

4.1. Battery Installation

  1. Locate the battery compartment cover on the back of the keyboard.
  2. Slide or lift the cover to open the compartment.
  3. Insert 2 x AAA batteries (not included) into the compartment, ensuring correct polarity (+/-).
  4. Close the battery compartment cover securely.
I8 Wireless Keyboard Battery and USB Receiver Compartment
Figure 1: Battery and USB Receiver Compartment
Shows the open battery compartment, location of the USB receiver storage, and the power switch.

4.2. Connecting the USB Receiver

  1. Open the battery compartment cover and retrieve the USB wireless receiver stored inside.
  2. Plug the USB receiver into an available USB port on your device (PC, Smart TV, Android TV Box, etc.).
  3. Turn on the keyboard using the power switch located near the battery compartment.
I8 Wireless Keyboard Front View with USB Receiver
Figure 2: Keyboard with USB Receiver
A clear top-down view of the keyboard alongside its USB receiver.
I8 Wireless Keyboard Compatibility
Figure 3: Device Compatibility
Diagram illustrating compatibility with Projector, Smart TV, Desktop Computer, Android TV BOX, and Notebook, highlighting the required USB receiver.

4.3. Pairing / Code Checking

The keyboard is usually pre-paired with its USB receiver. If the connection is not established automatically, follow these steps:

  1. Ensure the keyboard is powered off.
  2. Press and hold the Fn + F1 keys simultaneously.
  3. While holding Fn + F1, the blue indicator light on the keyboard will flash quickly.
  4. Plug the USB receiver into your device's USB port.
  5. Once the light stops flashing, the code matching is successful, and the keyboard is ready for use.

5. Operating Instructions

5.1. Keyboard Layout Overview

I8 Wireless Keyboard Layout and Touchpad Gestures
Figure 4: Keyboard Layout Overview
Overview of keyboard components including LED Indicator, Media controls, Touchpad, Navigation keys, Left/Right Mouse buttons, and the main Keyboard area.

5.2. Basic Functions and Multimedia Controls

I8 Wireless Keyboard Basic Functions
Figure 5: Basic and Multimedia Functions
Detailed diagram of media control buttons (volume up/down, previous/next song, play/pause), email, search, My Computer, browser shortcuts, left/right mouse click, and touchpad scrolling gesture.
  • V+ / V-: Turn up / Turn down volume
  • Previous / Next Song: Navigate media tracks
  • Play / Pause: Control media playback
  • Open Music Player: Launch default music application
  • Open Email Software: Launch default email client
  • Turn off Speaker Sound: Mute audio
  • Left Mouse Click: Primary click function
  • Open [Search]: Activate search function
  • Open [My Computer]: Access file explorer
  • Open Default Browser: Launch web browser
  • Right Mouse Click: Secondary click function

5.3. Touchpad Gestures

I8 Wireless Keyboard Layout and Touchpad Gestures
Figure 6: Touchpad Gestures
Visual instructions for touchpad gestures: Single Click, Double Fingers Click (Roll Screen or Zoom in/out), and Double Fingers Drag (Open Files).
  • Single Click: Standard left-click action.
  • Double Fingers Click: Equivalent to mouse scroll wheel (slide up/down to scroll page) or zoom in/out.
  • Double Fingers Drag: Used to open files or perform drag-and-drop actions.
  • Slide Finger Up and Down: To go up and down a page, equivalent to the scroller on a mouse.

5.4. Function (Fn) Key Combinations

I8 Wireless Keyboard Advanced Functions (Fn Combinations)
Figure 7: Fn Key Combinations
Diagram showing various Fn key combinations for advanced functions.
  • Fn + ...: Adjust mouse sensitivity
  • Fn + Enter (Ctrl+Alt+Del): [Task Manager] shortcut
  • Fn + F7 (PrtSc): [Print Screen] shortcut
  • Fn + F8: Turn off / on touchpad
  • Fn + F9: Maximize current page
  • Fn + F10: Open development tools
  • Fn + Home (PgUp): Jump to start of a text
  • Fn + End (PgDn): Jump to end of a text
  • Win Key: [Start / Menu] bar
  • RF F1: Used during factory reset process. See product description for more details.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the keyboard surface. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution. Do not use harsh chemicals or abrasive cleaners.
  • Battery Replacement: When the keyboard's performance degrades or it stops responding, replace the AAA batteries as described in the Setup Guide. Always use new batteries and dispose of old ones responsibly.
  • Storage: When not in use for extended periods, turn off the keyboard to conserve battery life. Store the USB receiver in its designated slot within the battery compartment to prevent loss. Keep the keyboard in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Liquids: Do not expose the keyboard to water or other liquids, as this can cause damage to internal components.

7. Troubleshooting

  • Keyboard not responding:
    • Ensure the keyboard is powered on.
    • Check if the batteries are correctly installed and have sufficient charge. Replace if necessary.
    • Ensure the USB receiver is securely plugged into your device.
    • Try plugging the USB receiver into a different USB port.
    • Perform the pairing/code checking procedure (Fn + F1) again.
    • Ensure there are no strong wireless interferences nearby (e.g., other 2.4GHz devices).
  • Touchpad not working:
    • Ensure the touchpad is not disabled (press Fn + F8 to toggle).
    • Clean the touchpad surface to remove any dirt or moisture.
  • Short operating range or lag:
    • Ensure the keyboard is within the 10-meter operating range.
    • Reduce obstacles between the keyboard and the USB receiver.
    • Replace batteries if they are low.

8. Specifications

Keys92 keys
Wireless Technology2.4GHz RF
Operating RangeUp to 10 meters (MAX, without signal disturbance)
Transmit Power+5db Max
Operation Voltage3.3V
Operation Current<50mA
Sleep Current<1mA
Weight110g
Dimensions (L x W x H)146 x 97 x 19 mm (5.78 x 3.85 x 0.74 inches)
Power Source2 x AAA Batteries (not included)
System RequirementsWindows 2000 / XP / 7 / Vista / 8 / 10, Linux (Debian-3.1, Redhat-9.0 Ubuntu-8.10 Fedora-7.0 tested), Android 4.0 and above
I8 Wireless Keyboard Dimensions
Figure 8: Keyboard Dimensions
Diagram showing the physical dimensions of the keyboard.

9. User Tips

  • For optimal performance, ensure a clear line of sight between the keyboard and the USB receiver.
  • If using with an Android TV box, some specific applications might have limited keyboard/mouse support.
  • Keep the touchpad clean for smooth and accurate cursor control.

10. Warranty and Support

For warranty information or technical support, please refer to the seller's policies or contact the point of purchase. Keep your purchase receipt as proof of purchase.

11. Regulatory Compliance

IC Statement

This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.